From: Heiko Stuebner <heiko@sntech.de>
To: David Wu <david.wu@rock-chips.com>
Cc: wsa@the-dreams.de, robh+dt@kernel.org, dianders@chromium.org,
andy.shevchenko@gmail.com, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, briannorris@google.com,
davidriley@google.com, huangtao@rock-chips.com,
hl@rock-chips.com, xjq@rock-chips.com, zyw@rock-chips.com,
cf@rock-chips.com, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 6/8] dt-bindings: i2c: rk3x: add support for rk3399
Date: Wed, 11 May 2016 20:20:56 +0200 [thread overview]
Message-ID: <1949934.3LNZYXcpHY@phil> (raw)
In-Reply-To: <1462908647-27236-1-git-send-email-david.wu@rock-chips.com>
Am Mittwoch, 11. Mai 2016, 03:30:47 schrieb David Wu:
> The bus clock and function clock are separated at rk3399,
> and others use one clock as the bus clock and function clock.
>
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
I'd second what Doug said wrt. the removal of the unnecessary "REQUIRED"
statements of the clock names, especially as the surrounding text makes that
requirement pretty clear.
Otherwiese looks nice, so
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
> Change in v8:
> - remove error description.
>
> Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt index
> 0b4a85f..5429301 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> @@ -6,10 +6,20 @@ RK3xxx SoCs.
> Required properties :
>
> - reg : Offset and length of the register set for the device
> - - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
> - "rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
> + - compatible: should be one of the following:
> + - "rockchip,rk3066-i2c": for rk3066
> + - "rockchip,rk3188-i2c": for rk3188
> + - "rockchip,rk3228-i2c": for rk3228
> + - "rockchip,rk3288-i2c": for rk3288
> + - "rockchip,rk3399-i2c": for rk3399
> - interrupts : interrupt number
> - - clocks : parent clock
> + - clocks: See ../clock/clock-bindings.txt
> + - For older hardware (rk3066, rk3188, rk3228, rk3288):
> + - There is one clock that's used both to derive the functional clock
> + for the device and as the bus clock.
> + - For newer hardware (rk3399): specified by name
> + - "i2c": REQUIRED. This is used to derive the functional clock.
> + - "pclk": REQUIRED. This is the bus clock.
>
> Required on RK3066, RK3188 :
next prev parent reply other threads:[~2016-05-11 18:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-10 19:24 [PATCH v8 0/8] add i2c driver supported for rk3399 David Wu
2016-05-10 19:24 ` [PATCH v8 1/8] i2c: rk3x: add documentation to fields in "struct rk3x_i2c" David Wu
2016-05-11 15:04 ` Heiko Stuebner
2016-05-10 19:24 ` [PATCH v8 2/8] i2c: rk3x: use struct "rk3x_i2c_calced_timings" David Wu
2016-05-10 19:24 ` [PATCH v8 3/8] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd() David Wu
2016-05-11 18:26 ` Heiko Stuebner
2016-05-12 1:11 ` David.Wu
2016-05-10 19:24 ` [PATCH v8 4/8] i2c: rk3x: Change SoC data to not use array David Wu
2016-05-10 19:29 ` [PATCH v8 5/8] i2c: rk3x: Move spec timing data to "static const" structs David Wu
[not found] ` <1462908252-27016-1-git-send-email-david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-05-10 19:30 ` [PATCH v8 6/8] dt-bindings: i2c: rk3x: add support for rk3399 David Wu
2016-05-11 16:35 ` Doug Anderson
2016-05-12 1:14 ` David.Wu
2016-05-11 18:20 ` Heiko Stuebner [this message]
2016-05-10 19:31 ` [PATCH v8 7/8] i2c: rk3x: add i2c support for rk3399 soc David Wu
2016-05-11 11:43 ` Caesar Wang
2016-05-11 17:37 ` Doug Anderson
2016-05-12 1:08 ` David.Wu
2016-05-12 15:07 ` David.Wu
[not found] ` <57349C36.4030401-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-05-12 21:09 ` Doug Anderson
2016-05-10 19:33 ` [PATCH v8 8/8] i2c: rk3x: support fast-mode plus for rk3399 David Wu
2016-05-11 11:44 ` Caesar Wang
2016-05-11 21:09 ` Heiko Stuebner
2016-05-11 23:41 ` Doug Anderson
2016-05-12 8:30 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1949934.3LNZYXcpHY@phil \
--to=heiko@sntech.de \
--cc=andy.shevchenko@gmail.com \
--cc=briannorris@google.com \
--cc=cf@rock-chips.com \
--cc=david.wu@rock-chips.com \
--cc=davidriley@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=hl@rock-chips.com \
--cc=huangtao@rock-chips.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=wsa@the-dreams.de \
--cc=xjq@rock-chips.com \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).