Re: [PATCH v7 07/19] clk: mediatek: reset: Support nonsequence base offsets of reset registers

[Rex-BC Chen <rex-bc.chen@mediatek.com>]

On Fri, 2022-05-20 at 11:18 -0400, Nícolas F. R. A. Prado wrote:
> Hi Rex,
> 
> On Thu, May 19, 2022 at 08:55:15PM +0800, Rex-BC Chen wrote:
> > The bank offsets are not serial for all reset registers.
> > For example, there are five infra reset banks for MT8192: 0x120,
> > 0x130,
> > 0x140, 0x150 and 0x730.
> > 
> > To support this,
> > - Change reg_ofs to rst_bank_ofs which is a pointer to base offsets
> > of
> >   the reset register.
> > - Add a new define RST_NR_PER_BANK to define reset number for each
> >   reset bank.
> > 
> > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > ---
> 
> <snip>
> 
> > diff --git a/drivers/clk/mediatek/clk-mt2701-g3d.c
> > b/drivers/clk/mediatek/clk-mt2701-g3d.c
> > index 9cfd589939e5..5cbc5c42204d 100644
> > --- a/drivers/clk/mediatek/clk-mt2701-g3d.c
> > +++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
> > @@ -35,10 +35,12 @@ static const struct mtk_gate g3d_clks[] = {
> >  	GATE_G3D(CLK_G3DSYS_CORE, "g3d_core", "mfg_sel", 0),
> >  };
> >  
> > +static u16 rst_ofs[] = { 0xC, };
> 
> Very nitpicky, but you could have left the hex lowercase '0xc'.
> 
> Thanks,
> Nícolas

Hello Nícolas,

ok, I will modify it in next version.

BRs,
Rex