From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko =?ISO-8859-1?Q?St=FCbner?= Subject: Re: [PATCH] iio: adc: rockchip_saradc: add support for rk3066-tsadc variant Date: Sat, 30 Aug 2014 22:38:35 +0200 Message-ID: <1990899.K4RIhRycbf@diego> References: <1999284.oRCTeZRSv1@diego> <540230F9.2010004@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <540230F9.2010004-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Jonathan Cameron Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Am Samstag, 30. August 2014, 21:15:53 schrieb Jonathan Cameron: > On 30/08/14 14:07, Heiko St=FCbner wrote: > > Older Rockchip SoCs, at least the rk3066, used a slightly modified = saradc > > for temperature measurements. This so called tsadc does not contain= any > > active parts like temperature interrupts and only supports polling = the > > current temperature. The returned voltage can then be converted by = a > > suitable thermal driver to and actual temperature and used for ther= mal > > handling. > >=20 > > Signed-off-by: Heiko Stuebner >=20 > Looks, good to me, but will let this sit for a few days for other com= ments > on it.=20 ok, cool > Long shot, but are the docs for the vairous rockchip parts > publically available somewhere? Not publically, at this point ... maybe somewhere in the future [hope := -) ] Heiko >=20 > > --- > > This is a different IP than the rk3288-tsadc Ceasar provided a driv= er for. > > As the commit messages states, the one used on the rk3066 is just a > > saradc, > > while the new tsadc in the rk3288 contains active components for th= ermal > > handling. > >=20 > > A working example using the pending iio-thermal driver can found on > > https://github.com/mmind/linux-rockchip/commit/c07e02f069d9677d489f= 2541766 > > 19fae36f2aad0>=20 > > .../bindings/iio/adc/rockchip-saradc.txt | 2 +- > > drivers/iio/adc/rockchip_saradc.c | 62 > > +++++++++++++++++----- 2 files changed, 50 insertions(+), 14 > > deletions(-) > >=20 > > diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-sar= adc.txt > > b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt ind= ex > > 5d3ec1d..a9a5fe1 100644 > > --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > > +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt > > @@ -1,7 +1,7 @@ > >=20 > > Rockchip Successive Approximation Register (SAR) A/D Converter bin= dings > >=20 > > Required properties: > > -- compatible: Should be "rockchip,saradc" > > +- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsad= c" > >=20 > > - reg: physical base address of the controller and length of memor= y > > mapped > > =20 > > region. > > =20 > > - interrupts: The interrupt number to the cpu. The interrupt speci= fier > > format>=20 > > diff --git a/drivers/iio/adc/rockchip_saradc.c > > b/drivers/iio/adc/rockchip_saradc.c index e074a0b..7effada 100644 > > --- a/drivers/iio/adc/rockchip_saradc.c > > +++ b/drivers/iio/adc/rockchip_saradc.c > > @@ -18,13 +18,13 @@ > >=20 > > #include > > #include > > #include > >=20 > > +#include > >=20 > > #include > > #include > > #include > > #include > > =20 > > #define SARADC_DATA 0x00 > >=20 > > -#define SARADC_DATA_MASK 0x3ff > >=20 > > #define SARADC_STAS 0x04 > > #define SARADC_STAS_BUSY BIT(0) > >=20 > > @@ -38,15 +38,22 @@ > >=20 > > #define SARADC_DLY_PU_SOC 0x0c > > #define SARADC_DLY_PU_SOC_MASK 0x3f > >=20 > > -#define SARADC_BITS 10 > >=20 > > #define SARADC_TIMEOUT msecs_to_jiffies(100) > >=20 > > +struct rockchip_saradc_data { > > + int num_bits; > > + const struct iio_chan_spec *channels; > > + int num_channels; > > + unsigned long clk_rate; > > +}; > > + > >=20 > > struct rockchip_saradc { > > =20 > > void __iomem *regs; > > struct clk *pclk; > > struct clk *clk; > > struct completion completion; > > struct regulator *vref; > >=20 > > + const struct rockchip_saradc_data *data; > >=20 > > u16 last_val; > > =20 > > }; > >=20 > > @@ -90,7 +97,7 @@ static int rockchip_saradc_read_raw(struct iio_de= v > > *indio_dev,>=20 > > } > > =09 > > *val =3D ret / 1000; > >=20 > > - *val2 =3D SARADC_BITS; > > + *val2 =3D info->data->num_bits; > >=20 > > return IIO_VAL_FRACTIONAL_LOG2; > > =09 > > default: > > return -EINVAL; > >=20 > > @@ -103,7 +110,7 @@ static irqreturn_t rockchip_saradc_isr(int irq,= void > > *dev_id)>=20 > > /* Read value */ > > info->last_val =3D readl_relaxed(info->regs + SARADC_DATA); > >=20 > > - info->last_val &=3D SARADC_DATA_MASK; > > + info->last_val &=3D BIT(info->data->num_bits) - 1; > >=20 > > /* Clear irq & power down adc */ > > writel_relaxed(0, info->regs + SARADC_CTRL); > >=20 > > @@ -133,12 +140,44 @@ static const struct iio_chan_spec > > rockchip_saradc_iio_channels[] =3D {>=20 > > ADC_CHANNEL(2, "adc2"), > > =20 > > }; > >=20 > > +static const struct rockchip_saradc_data saradc_data =3D { > > + .num_bits =3D 10, > > + .channels =3D rockchip_saradc_iio_channels, > > + .num_channels =3D ARRAY_SIZE(rockchip_saradc_iio_channels), > > + .clk_rate =3D 1000000, > > +}; > > + > > +static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channe= ls[] =3D > > { > > + ADC_CHANNEL(0, "adc0"), > > + ADC_CHANNEL(1, "adc1"), > > +}; > > + > > +static const struct rockchip_saradc_data rk3066_tsadc_data =3D { > > + .num_bits =3D 12, > > + .channels =3D rockchip_rk3066_tsadc_iio_channels, > > + .num_channels =3D ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels), > > + .clk_rate =3D 50000, > > +}; > > + > > +static const struct of_device_id rockchip_saradc_match[] =3D { > > + { > > + .compatible =3D "rockchip,saradc", > > + .data =3D &saradc_data, > > + }, { > > + .compatible =3D "rockchip,rk3066-tsadc", > > + .data =3D &rk3066_tsadc_data, > > + }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, rockchip_saradc_match); > > + > >=20 > > static int rockchip_saradc_probe(struct platform_device *pdev) > > { > > =20 > > struct rockchip_saradc *info =3D NULL; > > struct device_node *np =3D pdev->dev.of_node; > > struct iio_dev *indio_dev =3D NULL; > > struct resource *mem; > >=20 > > + const struct of_device_id *match; > >=20 > > int ret; > > int irq; > >=20 > > @@ -152,6 +191,9 @@ static int rockchip_saradc_probe(struct > > platform_device *pdev)>=20 > > } > > info =3D iio_priv(indio_dev); > >=20 > > + match =3D of_match_device(rockchip_saradc_match, &pdev->dev); > > + info->data =3D match->data; > > + > >=20 > > mem =3D platform_get_resource(pdev, IORESOURCE_MEM, 0); > > info->regs =3D devm_ioremap_resource(&pdev->dev, mem); > > if (IS_ERR(info->regs)) > >=20 > > @@ -195,7 +237,7 @@ static int rockchip_saradc_probe(struct > > platform_device *pdev)>=20 > > * Use a default of 1MHz for the converter clock. > > * This may become user-configurable in the future. > > */ > >=20 > > - ret =3D clk_set_rate(info->clk, 1000000); > > + ret =3D clk_set_rate(info->clk, info->data->clk_rate); > >=20 > > if (ret < 0) { > > =09 > > dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret); > > return ret; > >=20 > > @@ -227,8 +269,8 @@ static int rockchip_saradc_probe(struct > > platform_device *pdev)>=20 > > indio_dev->info =3D &rockchip_saradc_iio_info; > > indio_dev->modes =3D INDIO_DIRECT_MODE; > >=20 > > - indio_dev->channels =3D rockchip_saradc_iio_channels; > > - indio_dev->num_channels =3D ARRAY_SIZE(rockchip_saradc_iio_channe= ls); > > + indio_dev->channels =3D info->data->channels; > > + indio_dev->num_channels =3D info->data->num_channels; > >=20 > > ret =3D iio_device_register(indio_dev); > > if (ret) > >=20 > > @@ -296,12 +338,6 @@ static int rockchip_saradc_resume(struct devic= e *dev) > >=20 > > static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops, > > =20 > > rockchip_saradc_suspend, rockchip_saradc_resume); > >=20 > > -static const struct of_device_id rockchip_saradc_match[] =3D { > > - { .compatible =3D "rockchip,saradc" }, > > - {}, > > -}; > > -MODULE_DEVICE_TABLE(of, rockchip_saradc_match); > > - > >=20 > > static struct platform_driver rockchip_saradc_driver =3D { > > =20 > > .probe =3D rockchip_saradc_probe, > > .remove =3D rockchip_saradc_remove,