[PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Sébastien Szymanski]

Check the max speed supported from the fuses for i.MX6ULL and update the
operating points table accordingly.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---

Changes for v3:
 - none

Changes for v2:
 - none

 drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 83cf631fc9bc..f094687cae52 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
 }
 
 #define OCOTP_CFG3_6UL_SPEED_696MHZ	0x2
+#define OCOTP_CFG3_6ULL_SPEED_792MHZ	0x2
+#define OCOTP_CFG3_6ULL_SPEED_900MHZ	0x3
 
 static void imx6ul_opp_check_speed_grading(struct device *dev)
 {
@@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev)
 	 * Speed GRADING[1:0] defines the max speed of ARM:
 	 * 2b'00: Reserved;
 	 * 2b'01: 528000000Hz;
-	 * 2b'10: 696000000Hz;
-	 * 2b'11: Reserved;
+	 * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL;
+	 * 2b'11: 900000000Hz on i.MX6ULL only;
 	 * We need to set the max speed of ARM according to fuse map.
 	 */
 	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
 	val &= 0x3;
-	if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
-		if (dev_pm_opp_disable(dev, 696000000))
-			dev_warn(dev, "failed to disable 696MHz OPP\n");
+
+	if (of_machine_is_compatible("fsl,imx6ul")) {
+		if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
+			if (dev_pm_opp_disable(dev, 696000000))
+				dev_warn(dev, "failed to disable 696MHz OPP\n");
+	}
+
+	if (of_machine_is_compatible("fsl,imx6ull")) {
+		if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ)
+			if (dev_pm_opp_disable(dev, 792000000))
+				dev_warn(dev, "failed to disable 792MHz OPP\n");
+
+		if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ)
+			if (dev_pm_opp_disable(dev, 900000000))
+				dev_warn(dev, "failed to disable 900MHz OPP\n");
+	}
+
 	iounmap(base);
 put_node:
 	of_node_put(np);
@@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		goto put_reg;
 	}
 
-	if (of_machine_is_compatible("fsl,imx6ul"))
+	if (of_machine_is_compatible("fsl,imx6ul") ||
+	    of_machine_is_compatible("fsl,imx6ull"))
 		imx6ul_opp_check_speed_grading(cpu_dev);
 	else
 		imx6q_opp_check_speed_grading(cpu_dev);
-- 
2.16.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/3] ARM: dts: imx6ull: add operating points

[Sébastien Szymanski]

i.MX6ULL has different operating ranges than i.MX6UL so add the
operating points for the i.MX6ULL. A 25mV offset is added to the minimum
allowed values like for the i.MX6UL.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---

Changes for v3:
 - none

Changes for v2:
 - Fix soc-operating-points voltage for 792MHz and 900MHz

 arch/arm/boot/dts/imx6ull.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 571ddd71cdba..530d5526b890 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -46,6 +46,25 @@
 /* Delete UART8 in AIPS-1 (i.MX6UL specific) */
 /delete-node/ &uart8;
 
+&cpu0 {
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1225000
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1175000
+		792000	1175000
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
 / {
 	soc {
 		aips3: aips-bus@2200000 {
-- 
2.16.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/3] ARM: dts: imx6ull-colibri-wifi: remove operating points

[Sébastien Szymanski]

Operating points are now defined in the imx6ull.dtsi file so remove
them from board device trees.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 3dffbcd50bf6..183193e8580d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -20,20 +20,6 @@
 
 &cpu0 {
 	clock-frequency = <792000000>;
-	operating-points = <
-		/* kHz	uV */
-		792000  1225000
-		528000	1175000
-		396000	1025000
-		198000	950000
-	>;
-	fsl,soc-operating-points = <
-		/* KHz	uV */
-		792000  1175000
-		528000	1175000
-		396000	1175000
-		198000	1175000
-	>;
 };
 
 &iomuxc {
-- 
2.16.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/3] ARM: dts: imx6ull-colibri-wifi: remove operating points

[Viresh Kumar]

On 22-05-18, 08:28, Sébastien Szymanski wrote:
> Operating points are now defined in the imx6ull.dtsi file so remove
> them from board device trees.
> 
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> ---
>  arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 14 --------------
>  1 file changed, 14 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> index 3dffbcd50bf6..183193e8580d 100644
> --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> @@ -20,20 +20,6 @@
>  
>  &cpu0 {
>  	clock-frequency = <792000000>;
> -	operating-points = <
> -		/* kHz	uV */
> -		792000  1225000
> -		528000	1175000
> -		396000	1025000
> -		198000	950000
> -	>;
> -	fsl,soc-operating-points = <
> -		/* KHz	uV */
> -		792000  1175000
> -		528000	1175000
> -		396000	1175000
> -		198000	1175000
> -	>;
>  };
>  
>  &iomuxc {

Maybe you should merge this with the previous patch itself.

-- 
viresh

Re: [PATCH v3 3/3] ARM: dts: imx6ull-colibri-wifi: remove operating points

[Stefan Agner]

On 23.05.2018 06:30, Viresh Kumar wrote:
> On 22-05-18, 08:28, Sébastien Szymanski wrote:
>> Operating points are now defined in the imx6ull.dtsi file so remove
>> them from board device trees.
>>
>> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
>> ---
>>  arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 14 --------------
>>  1 file changed, 14 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
>> index 3dffbcd50bf6..183193e8580d 100644
>> --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
>> +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
>> @@ -20,20 +20,6 @@
>>
>>  &cpu0 {
>>  	clock-frequency = <792000000>;
>> -	operating-points = <
>> -		/* kHz	uV */
>> -		792000  1225000
>> -		528000	1175000
>> -		396000	1025000
>> -		198000	950000
>> -	>;
>> -	fsl,soc-operating-points = <
>> -		/* KHz	uV */
>> -		792000  1175000
>> -		528000	1175000
>> -		396000	1175000
>> -		198000	1175000
>> -	>;
>>  };
>>
>>  &iomuxc {
> 
> Maybe you should merge this with the previous patch itself.


I am with Viresh here, I rather prefer this in a single commit so it is
clear that frequencies moved to the base device tree.

Also, add a comment that frequency selection is now handled in code,
e.g.:

"The valid frequencies for a particular SKU are now selected by the
cpufreq driver according to ratings stored in OTP fuses."

But the two device tree changes with the driver do what they should do
here, so:

Tested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>

--
Stefan

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Viresh Kumar]

On 22-05-18, 08:28, Sébastien Szymanski wrote:
> Check the max speed supported from the fuses for i.MX6ULL and update the
> operating points table accordingly.
> 
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> ---
> 
> Changes for v3:
>  - none

@Sascha and Shawn: Can you guys please Ack this series if there is
nothing wrong with it ?

-- 
viresh

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Sébastien Szymanski]

On 05/23/2018 06:29 AM, Viresh Kumar wrote:
> On 22-05-18, 08:28, Sébastien Szymanski wrote:
>> Check the max speed supported from the fuses for i.MX6ULL and update the
>> operating points table accordingly.
>>
>> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
>> ---
>>
>> Changes for v3:
>>  - none
> 
> @Sascha and Shawn: Can you guys please Ack this series if there is
> nothing wrong with it ?
> 

ping...

-- 
Sébastien Szymanski
Software engineer, Armadeus Systems
Tel: +33 (0)9 72 29 41 44
Fax: +33 (0)9 72 28 79 26

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Viresh Kumar]

On 22-05-18, 08:28, Sébastien Szymanski wrote:
> Check the max speed supported from the fuses for i.MX6ULL and update the
> operating points table accordingly.
> 
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> ---
> 
> Changes for v3:
>  - none
> 
> Changes for v2:
>  - none
> 
>  drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------
>  1 file changed, 23 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index 83cf631fc9bc..f094687cae52 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
>  }
>  
>  #define OCOTP_CFG3_6UL_SPEED_696MHZ	0x2
> +#define OCOTP_CFG3_6ULL_SPEED_792MHZ	0x2
> +#define OCOTP_CFG3_6ULL_SPEED_900MHZ	0x3
>  
>  static void imx6ul_opp_check_speed_grading(struct device *dev)
>  {
> @@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev)
>  	 * Speed GRADING[1:0] defines the max speed of ARM:
>  	 * 2b'00: Reserved;
>  	 * 2b'01: 528000000Hz;
> -	 * 2b'10: 696000000Hz;
> -	 * 2b'11: Reserved;
> +	 * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL;
> +	 * 2b'11: 900000000Hz on i.MX6ULL only;
>  	 * We need to set the max speed of ARM according to fuse map.
>  	 */
>  	val = readl_relaxed(base + OCOTP_CFG3);
>  	val >>= OCOTP_CFG3_SPEED_SHIFT;
>  	val &= 0x3;
> -	if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
> -		if (dev_pm_opp_disable(dev, 696000000))
> -			dev_warn(dev, "failed to disable 696MHz OPP\n");
> +
> +	if (of_machine_is_compatible("fsl,imx6ul")) {
> +		if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
> +			if (dev_pm_opp_disable(dev, 696000000))
> +				dev_warn(dev, "failed to disable 696MHz OPP\n");
> +	}
> +
> +	if (of_machine_is_compatible("fsl,imx6ull")) {
> +		if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ)
> +			if (dev_pm_opp_disable(dev, 792000000))
> +				dev_warn(dev, "failed to disable 792MHz OPP\n");
> +
> +		if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ)
> +			if (dev_pm_opp_disable(dev, 900000000))
> +				dev_warn(dev, "failed to disable 900MHz OPP\n");
> +	}
> +
>  	iounmap(base);
>  put_node:
>  	of_node_put(np);
> @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
>  		goto put_reg;
>  	}
>  
> -	if (of_machine_is_compatible("fsl,imx6ul"))
> +	if (of_machine_is_compatible("fsl,imx6ul") ||
> +	    of_machine_is_compatible("fsl,imx6ull"))
>  		imx6ul_opp_check_speed_grading(cpu_dev);
>  	else
>  		imx6q_opp_check_speed_grading(cpu_dev);

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Stefan Agner]

On 22.05.2018 08:28, Sébastien Szymanski wrote:
> Check the max speed supported from the fuses for i.MX6ULL and update the
> operating points table accordingly.
> 
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>

Tested with a 528MHz and 792MHz rated i.MX 6ULL, looks good!

Tested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>

--
Stefan

> ---
> 
> Changes for v3:
>  - none
> 
> Changes for v2:
>  - none
> 
>  drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------
>  1 file changed, 23 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index 83cf631fc9bc..f094687cae52 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct
> device *dev)
>  }
>  
>  #define OCOTP_CFG3_6UL_SPEED_696MHZ	0x2
> +#define OCOTP_CFG3_6ULL_SPEED_792MHZ	0x2
> +#define OCOTP_CFG3_6ULL_SPEED_900MHZ	0x3
>  
>  static void imx6ul_opp_check_speed_grading(struct device *dev)
>  {
> @@ -287,16 +289,30 @@ static void
> imx6ul_opp_check_speed_grading(struct device *dev)
>  	 * Speed GRADING[1:0] defines the max speed of ARM:
>  	 * 2b'00: Reserved;
>  	 * 2b'01: 528000000Hz;
> -	 * 2b'10: 696000000Hz;
> -	 * 2b'11: Reserved;
> +	 * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL;
> +	 * 2b'11: 900000000Hz on i.MX6ULL only;
>  	 * We need to set the max speed of ARM according to fuse map.
>  	 */
>  	val = readl_relaxed(base + OCOTP_CFG3);
>  	val >>= OCOTP_CFG3_SPEED_SHIFT;
>  	val &= 0x3;
> -	if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
> -		if (dev_pm_opp_disable(dev, 696000000))
> -			dev_warn(dev, "failed to disable 696MHz OPP\n");
> +
> +	if (of_machine_is_compatible("fsl,imx6ul")) {
> +		if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
> +			if (dev_pm_opp_disable(dev, 696000000))
> +				dev_warn(dev, "failed to disable 696MHz OPP\n");
> +	}
> +
> +	if (of_machine_is_compatible("fsl,imx6ull")) {
> +		if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ)
> +			if (dev_pm_opp_disable(dev, 792000000))
> +				dev_warn(dev, "failed to disable 792MHz OPP\n");
> +
> +		if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ)
> +			if (dev_pm_opp_disable(dev, 900000000))
> +				dev_warn(dev, "failed to disable 900MHz OPP\n");
> +	}
> +
>  	iounmap(base);
>  put_node:
>  	of_node_put(np);
> @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
>  		goto put_reg;
>  	}
>  
> -	if (of_machine_is_compatible("fsl,imx6ul"))
> +	if (of_machine_is_compatible("fsl,imx6ul") ||
> +	    of_machine_is_compatible("fsl,imx6ull"))
>  		imx6ul_opp_check_speed_grading(cpu_dev);
>  	else
>  		imx6q_opp_check_speed_grading(cpu_dev);

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Fabio Estevam]

On Tue, May 22, 2018 at 3:28 AM, Sébastien Szymanski
<sebastien.szymanski@armadeus.com> wrote:
> Check the max speed supported from the fuses for i.MX6ULL and update the
> operating points table accordingly.
>
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Shawn Guo]

On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote:
> Check the max speed supported from the fuses for i.MX6ULL and update the
> operating points table accordingly.
> 
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>

Acked-by: Shawn Guo <shawnguo@kernel.org>

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Rafael J. Wysocki]

On Monday, June 11, 2018 7:38:27 AM CEST Shawn Guo wrote:
> On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote:
> > Check the max speed supported from the fuses for i.MX6ULL and update the
> > operating points table accordingly.
> > 
> > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> 
> Acked-by: Shawn Guo <shawnguo@kernel.org>

Patch applied, thanks!

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Sébastien Szymanski]

Hi,

On 06/11/2018 07:38 AM, Shawn Guo wrote:
> On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote:
>> Check the max speed supported from the fuses for i.MX6ULL and update the
>> operating points table accordingly.
>>
>> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> 
> Acked-by: Shawn Guo <shawnguo@kernel.org>
> 

Thanks, but what about the two others patches ? Now that patch 1 is in
4.18-rc1, should I resend the two others patches ? Should I merge them
together ?

-- 
Sébastien Szymanski

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Rafael J. Wysocki]

On Mon, Jun 25, 2018 at 10:01 AM, Sébastien Szymanski
<sebastien.szymanski@armadeus.com> wrote:
> Hi,
>
> On 06/11/2018 07:38 AM, Shawn Guo wrote:
>> On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote:
>>> Check the max speed supported from the fuses for i.MX6ULL and update the
>>> operating points table accordingly.
>>>
>>> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
>>
>> Acked-by: Shawn Guo <shawnguo@kernel.org>
>>
>
> Thanks, but what about the two others patches ? Now that patch 1 is in
> 4.18-rc1, should I resend the two others patches ?

Please do.

> Should I merge them together ?

If they make related changes, you can do that.

Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

[Shawn Guo]

On Mon, Jun 25, 2018 at 10:01:44AM +0200, Sébastien Szymanski wrote:
> Hi,
> 
> On 06/11/2018 07:38 AM, Shawn Guo wrote:
> > On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote:
> >> Check the max speed supported from the fuses for i.MX6ULL and update the
> >> operating points table accordingly.
> >>
> >> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> > 
> > Acked-by: Shawn Guo <shawnguo@kernel.org>
> > 
> 
> Thanks, but what about the two others patches ? Now that patch 1 is in
> 4.18-rc1, should I resend the two others patches ? Should I merge them
> together ?

Yes, please.  That's what Viresh and Stefan were asking in the review.

Shawn