From: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 2/3] arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file
Date: Thu, 8 Jun 2017 15:52:57 +0200 [thread overview]
Message-ID: <1abcc8b1-de0f-859e-0200-ccdc2dce7354@gmail.com> (raw)
In-Reply-To: <60640937c793184ce12f88e5c66f3f316e97cefa.1496250798.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
On 31/05/17 19:29, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> add basic nodes into the mt7622.dtsi for the system
> bring-up which includes ARM CPU, GIC, timer, MediaTek
> UART, SYSIRQ and one reserved memory region for ATF.
>
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 103 +++++++++++++++++++++++++++++++
> 1 file changed, 103 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt7622.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> new file mode 100644
> index 0000000..2031b73
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -0,0 +1,103 @@
> +/*
> + * Copyright (c) 2017 MediaTek Inc.
> + * Author: Ming Huang <ming.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> + * Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> + *
> + * SPDX-License-Identifier: (GPL-2.0 OR MIT)
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "mediatek,mt7622";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + clock-frequency = <1300000000>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + clock-frequency = <1300000000>;
> + };
> + };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> + secmon_reserved: secmon@43000000 {
> + reg = <0 0x43000000 0 0x30000>;
> + no-map;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + sysirq: interrupt-controller@10200620 {
> + compatible = "mediatek,mt7622-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200620 0 0x20>;
> + };
> +
> + gic: interrupt-controller@10300000 {
> + compatible = "arm,gic-400";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10310000 0 0x1000>,
> + <0 0x10320000 0 0x1000>,
> + <0 0x10340000 0 0x2000>,
> + <0 0x10360000 0 0x2000>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt7622-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
mt6577-uart has two clocks. Please fix this.
I would appreciate if you could rebase on the mediatek for-next branch
(especially for 3/3), which will make it easier for me to take this.
Regards,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-06-08 13:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-31 17:28 [PATCH v3 0/4] Add Basic SoC support for MT7622 sean.wang
2017-05-31 17:28 ` [PATCH v3 1/3] dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC sean.wang
[not found] ` <1b9dd0df077a59aea5a15e3cb7775f80224b0b06.1496250798.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-06-07 21:30 ` Rob Herring
2017-06-08 14:37 ` Matthias Brugger
[not found] ` <cover.1496250798.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-05-31 17:29 ` [PATCH v3 2/3] arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file sean.wang-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <60640937c793184ce12f88e5c66f3f316e97cefa.1496250798.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-06-08 13:52 ` Matthias Brugger [this message]
[not found] ` <1abcc8b1-de0f-859e-0200-ccdc2dce7354-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-08 16:07 ` Sean Wang
2017-06-08 16:24 ` Matthias Brugger
2017-05-31 17:29 ` [PATCH v3 3/3] arm64: dts: mt7622: add dts file for MT7622 reference board variant 1 sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1abcc8b1-de0f-859e-0200-ccdc2dce7354@gmail.com \
--to=matthias.bgg-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).