From: Andrew Lunn <andrew@lunn.ch>
To: LemonFan-maker <2254650260@qq.com>
Cc: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: rockchip: Add EmbedFire LubanCat 4 board
Date: Sun, 5 Jul 2026 17:11:58 +0200 [thread overview]
Message-ID: <1ac2d0f4-e027-4633-9d34-2709cb3e43ec@lunn.ch> (raw)
In-Reply-To: <tencent_6D311DC5F405B157049538DD5B080082A10A@qq.com>
> +&gmac1 {
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy1>;
> + /* The board has 1.5ns delays on RX lines; TX delay is provided by the MAC. */
That is pretty unusual. How is this RX delay done?
> + phy-mode = "rgmii-rxid";
> + pinctrl-0 = <&gmac1_miim
> + &gmac1_tx_bus2
> + &gmac1_rx_bus2
> + &gmac1_rgmii_clk
> + &gmac1_rgmii_bus>;
> + pinctrl-names = "default";
> + tx_delay = <0x1b>;
please take a read of:
https://elixir.bootlin.com/linux/v6.15/source/Documentation/devicetree/bindings/net/ethernet-controller.yaml#L287
Ideally, you want to the PHY adding the delay, not the MAC. 99% of
rockchip boards get this wrong, they have phy-mode 'rgmii', and
{tx|rx}_delay properties. And i tell developers to swap to 'rgmii-id'
and remove the delay properties.
With the PCB adding some delays, you board is slightly
different. Please drop the tx_delay and adjust the phy-mode so the PHY
adds the delay.
Andrew
next prev parent reply other threads:[~2026-07-05 15:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260705135014.1004166-1-2254650260@qq.com>
2026-07-05 13:50 ` [PATCH 1/2] dt-bindings: arm: rockchip: Add EmbedFire LubanCat 4 board LemonFan-maker
2026-07-05 14:37 ` Conor Dooley
2026-07-05 14:38 ` Conor Dooley
2026-07-06 21:24 ` Pufan Jin
2026-07-05 13:50 ` [PATCH 2/2] arm64: dts: " LemonFan-maker
2026-07-05 14:00 ` sashiko-bot
2026-07-05 15:11 ` Andrew Lunn [this message]
2026-07-06 21:20 ` Pufan Jin
2026-07-06 21:34 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ac2d0f4-e027-4633-9d34-2709cb3e43ec@lunn.ch \
--to=andrew@lunn.ch \
--cc=2254650260@qq.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox