Re: [PATCH v3 2/8] dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 26/12/2023 19:11, Josua Mayer wrote:
> Add DT compatible for SolidRun Armada-385 based Clearfog GTR L8 and S4
> boards.
> 
> Despite similar name these two boards are designed differently from the
> armada 388 clearfog base and pro, they only share a name and general use
> case.
> 
> Signed-off-by: Josua Mayer <josua@solid-run.com>
> ---
>  Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
> index 5af222e6db18..5bc69c4fe34d 100644
> --- a/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
> +++ b/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
> @@ -30,4 +30,12 @@ properties:
>            - const: marvell,armada385
>            - const: marvell,armada380
>  
> +      - description: SolidRun Armada 385 based single-board computers
> +        items:
> +          - enum:
> +             - solidrun,clearfog-gtr-l8

When I pointed out in your previous versions that you do not test
patches, I did it in hope to encourage testing patches...

Standard boiler plate:

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

Best regards,
Krzysztof