Re: [PATCH net-next v5 13/14] microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY

[<Parthiban.Veerasooran@microchip.com>]

Hi Andrew,

On 11/08/24 9:39 pm, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Tue, Jul 30, 2024 at 09:39:05AM +0530, Parthiban Veerasooran wrote:
>> The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x
>> MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4
>> MAC integration provides the low pin count standard SPI interface to any
>> microcontroller therefore providing Ethernet functionality without
>> requiring MAC integration within the microcontroller. The LAN8650/1
>> operates as an SPI client supporting SCLK clock rates up to a maximum of
>> 25 MHz. This SPI interface supports the transfer of both data (Ethernet
>> frames) and control (register access).
>>
>> By default, the chunk data payload is 64 bytes in size. The Ethernet
>> Media Access Controller (MAC) module implements a 10 Mbps half duplex
>> Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S
>> physical layer transceiver integrated is into the LAN8650/1. The PHY and
>> MAC are connected via an internal Media Independent Interface (MII).
> 
> I see there are some fixes needed for Multicast, but otherwise this
> looks O.K.
Sure, will fix them.
> 
> Please send a new version with the fixes, and then i think we are
> ready for this to be merged.
O.K. Thanks a lot Andrew for reviewing all the patches. I will fix the 
above patch and send v6 patch series now.

Best regards,
Parthiban V
> 
>          Andrew
> 
>