From: Mikhail Zhilkin <csharper2005@gmail.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: NOGUCHI Hiroshi <drvlabo@gmail.com>, Karim <Karimdplay@gmail.com>,
M <x1@disroot.org>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser
Date: Fri, 29 Apr 2022 18:26:40 +0300 [thread overview]
Message-ID: <1c19faf9-fc1c-9adf-d038-97b673a8f0be@gmail.com> (raw)
In-Reply-To: <b279040a-a782-a2ca-2acb-2d8f07709081@linaro.org>
On 4/29/2022 9:46 AM, Krzysztof Kozlowski wrote:
>>> I am sorry, but you changed now a lot in the bindings and it looks
>>> entirely different. Things previously being correct now are wrong, so
>>> rather start from your old bindings...
>>
>> Looks like I'm a bit confused... I use dual "compatible" in my real dts
>> and I realized that:
>>
>> 1. Therefore I have to use dual "compatible" in example too:
>>
>> compatible = "sercomm,sc-partitions", "fixed-partitions";
>>
>> 2. When I'm trying to reuse "fixed-partitions" compatible from
>> fixed-partitions.yaml in my new .yaml I get "too long" errors.
> Yes, the fixed-partitions.yaml would have to be changed to allow extension.
Well.
>> Real dts:
>>
>> Link:
>> https://github.com/openwrt/openwrt/blob/edcc1a9a734bb3fcdc9242025290d3f173e71b78/target/linux/ramips/dts/mt7621_beeline_smartbox-giga.dts#L79
>>
>> So, I currently found another solution - to extend fixed-partitions.yaml
>> with "sercomm,sc-partitions". Is It ok from your side? Can I use this
>> code in v3?
> Not really, I don't understand why do you need it
The main idea is keeping original Sercomm firmware behavior:
1. If dynamic partition map found then use offsets and mtd sizes stored
in partition map. It's provided by "sercomm,sc-partitions" compatible.
2. If dynamic partition map doesn't exist or broken then default values
(from dts) are used. It's provided by "fixed-partitions" compatible.
> and it does not
> include our previous talks.
At the time, I didn't realize how important is it. Understanding began
to come after dozens of experiments and checking the similar Linux patches.
>> diff --git
>> a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
>> b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
>> index ea4cace6a955..9eebe39a57fb 100644
>> --- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
>> @@ -19,7 +19,11 @@ maintainers:
>>
>> properties:
>> compatible:
>> - const: fixed-partitions
>> + oneOf:
>> + - const: fixed-partitions
>> + - items:
>> + - const: sercomm,sc-partitions
>> + - const: fixed-partitions
>>
>> "#address-cells": true
>>
>> @@ -27,7 +31,18 @@ properties:
>>
>> patternProperties:
>> "@[0-9a-f]+$":
>> - $ref: "partition.yaml#"
>> + allOf:
>> + - $ref: "partition.yaml#"
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: sercomm,sc-partitions
>> + then:
>> + properties:
>> + scpart-id:
> It still misses vendor prefix and we agreed you don't need it, didn't we?
Do you mean "sercomm" vendor prefix? If so then we agreed that I include
it in a separate patch:
Link:
https://lore.kernel.org/linux-mtd/1b391399-984b-7a63-3265-62ef09caec39@gmail.com/
I'm going to send it in v3:
---
dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
Update Documentation/devicetree/bindings/vendor-prefixes.yaml to include
"sercomm" as a vendor prefix for "Sercomm (Suzhou) Corporation".
Company website:
Link: https://www.sercomm.com/
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml
b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 01430973ecec..65ff22364fb3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1082,6 +1082,8 @@ patternProperties:
description: Sensirion AG
"^sensortek,.*":
description: Sensortek Technology Corporation
+ "^sercomm,.*":
+ description: Sercomm (Suzhou) Corporation
"^sff,.*":
description: Small Form Factor Committee
"^sgd,.*":
--
2.25.1
> Best regards,
> Krzysztof
--
Best regards,
Mikhail
next prev parent reply other threads:[~2022-04-29 15:26 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 19:55 [PATCH v2 0/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser Mikhail Zhilkin
2022-04-06 19:59 ` [PATCH v2 1/2] " Mikhail Zhilkin
2022-04-07 7:48 ` Krzysztof Kozlowski
2022-04-09 12:26 ` Mikhail Zhilkin
2022-04-09 12:43 ` Krzysztof Kozlowski
2022-04-09 18:04 ` Mikhail Zhilkin
2022-04-09 18:17 ` Mikhail Zhilkin
2022-04-10 8:18 ` Krzysztof Kozlowski
2022-04-28 15:24 ` Mikhail Zhilkin
2022-04-29 6:46 ` Krzysztof Kozlowski
2022-04-29 15:26 ` Mikhail Zhilkin [this message]
2022-04-29 20:22 ` Krzysztof Kozlowski
2022-04-30 8:04 ` Mikhail Zhilkin
2022-04-30 14:35 ` Krzysztof Kozlowski
2022-04-30 18:54 ` Mikhail Zhilkin
2022-05-01 8:17 ` Krzysztof Kozlowski
2022-05-01 14:51 ` Mikhail Zhilkin
2022-05-01 16:17 ` Krzysztof Kozlowski
2022-05-02 5:42 ` Mikhail Zhilkin
2022-04-10 8:14 ` Krzysztof Kozlowski
2022-04-07 13:50 ` Rob Herring
2022-04-09 12:35 ` Mikhail Zhilkin
2022-04-09 12:49 ` Krzysztof Kozlowski
2022-04-10 6:54 ` Mikhail Zhilkin
2022-04-06 20:00 ` [PATCH v2 2/2] mtd: parsers: add support for Sercomm partitions Mikhail Zhilkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1c19faf9-fc1c-9adf-d038-97b673a8f0be@gmail.com \
--to=csharper2005@gmail.com \
--cc=Karimdplay@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=drvlabo@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=x1@disroot.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).