[PATCH v6 0/6] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU

[PATCH v6 0/6] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU

[Priit Laes]

Hi,

This serie brings A10 (sun4i) and A20 (sun7i) SoCs into the
sunxi-ng world. With this patchset we now support all the clocks
in sun4i/sun7i SoCs.

As mentioned in sun5i conversion, this is pretty much standard
stuff as most of the required clocks were already implemented in
the sunxi-ng framework.

In order to make cross-tree merges bisectable, device trees are
currently using plain numbers instead of defines.

Changes from v5:
 - Added reviewed-by tags for Wens (A10/A20 dts bindings)
 - Fix hdmi clock parents (Jonathan Liu)
 - Add missing TVE0/1 reset bits (Olliver Schinagl)
 - Fix divider clock's fixed postdivider logic again (Maxime Ripard)
 - Set CLK_SET_RATE_PARENT for main hdmi and gpu clocks (Jonathan Liu)

Changes from v4:
 - Add CLK_SET_RATE_PARENT to "sata" clock.
 - Add proper postdivider support for divider clock.

Changes from v3:
 - Add support for fixed post-divider support for DIV clocks.
 - Fix wrong clk_ops for SATA. Spotted by Jonathan Liu.
 - Use numeric values for clock indices to make merging somewhat easier
 - Create separate sun7i/a20 specific header.

Changes from v2:
 - Rename driver and relevant files to sun4i-a10-ccu.
 - Drop mmc output and sample clocks for sun4i-a10.
 - Rename CSI ISP clock to SCLK as it is called on other variants.
 - Add comment on why PLL6 is used as AHB parent.
 - Fix parents for out_a/out_b clocks.
 - Stop exporting PLL_PERIPH_SATA gate. Driver takes care of gate.
 - Rework SATA clock handling.
 - Fix ahb gate parents.
 - Simplefb clock fixes (add dependencies for HDMI/LVDS clocks).
 - Fixes for pll-ve and pll-video1 clocks pointed out by Jonathan Liu.
 - Adapt to latest upstream changes from sunxi-next.

Changes from v1:
 - Drop useless comments
 - Add support for A10 / sun4i.
 - Rename driver to sunxi-a10-a20.
 - Add previously unimplemented clocks.
 - Document the audio pll hardcoded post-divider
 - Add Acked-by: Rob Herring <robh at kernel.org> on patch 4

Priit Laes (6):
  clk: sunxi-ng: div: Add support for fixed post-divider
  clk: sunxi-ng: Add sun4i/sun7i CCU driver
  dt-bindings: List devicetree binding for the CCU of Allwinner A20
  dt-bindings: List devicetree binding for the CCU of Allwinner A10
  ARM: sun7i: Convert to CCU
  ARM: sun4i: Convert to CCU

 Documentation/devicetree/bindings/clock/sunxi-ccu.txt |    2 +-
 arch/arm/boot/dts/sun4i-a10.dtsi                      |  646 +----
 arch/arm/boot/dts/sun7i-a20.dtsi                      |  719 +-----
 drivers/clk/sunxi-ng/Kconfig                          |   13 +-
 drivers/clk/sunxi-ng/Makefile                         |    1 +-
 drivers/clk/sunxi-ng/ccu-sun4i-a10.c                  | 1454 ++++++++++-
 drivers/clk/sunxi-ng/ccu-sun4i-a10.h                  |   61 +-
 drivers/clk/sunxi-ng/ccu_div.c                        |   15 +-
 drivers/clk/sunxi-ng/ccu_div.h                        |    3 +-
 include/dt-bindings/clock/sun4i-a10-ccu.h             |  200 +-
 include/dt-bindings/clock/sun7i-a20-ccu.h             |   53 +-
 include/dt-bindings/reset/sun4i-a10-ccu.h             |   69 +-
 12 files changed, 2025 insertions(+), 1211 deletions(-)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
 create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
 create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
 create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h

base-commit: 4ca6df134847a6349620b485a3e63f00fb3bfad8
-- 
git-series 0.9.1

[PATCH v6 1/6] clk: sunxi-ng: div: Add support for fixed post-divider

[Priit Laes]

SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
6 is fixed post-divider.

Signed-off-by: Priit Laes <plaes@plaes.org>
---
 drivers/clk/sunxi-ng/ccu_div.c | 15 +++++++++++++--
 drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index c0e5c10..744502a 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct ccu_mux_internal *mux,
 {
 	struct ccu_div *cd = data;
 
+	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= cd->fixed_post_div;
+
 	return divider_round_rate_parent(&cd->common.hw, parent,
 					 rate, parent_rate,
 					 cd->div.table, cd->div.width,
@@ -62,8 +65,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
 	parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
 						  parent_rate);
 
-	return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
-				   cd->div.flags);
+	val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
+				  cd->div.flags);
+
+	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		val /= cd->fixed_post_div;
+
+	return val;
 }
 
 static int ccu_div_determine_rate(struct clk_hw *hw,
@@ -86,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
 	parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
 						  parent_rate);
 
+	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= cd->fixed_post_div;
+
 	val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
 			      cd->div.flags);
 
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 08d0744..f3a5028 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -86,9 +86,10 @@ struct ccu_div_internal {
 struct ccu_div {
 	u32			enable;
 
-	struct ccu_div_internal		div;
+	struct ccu_div_internal	div;
 	struct ccu_mux_internal	mux;
 	struct ccu_common	common;
+	unsigned int		fixed_post_div;
 };
 
 #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg,	\
-- 
git-series 0.9.1

[PATCH v6 2/6] clk: sunxi-ng: Add sun4i/sun7i CCU driver

[Priit Laes]

Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.

Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
 drivers/clk/sunxi-ng/Kconfig              |   13 +-
 drivers/clk/sunxi-ng/Makefile             |    1 +-
 drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1454 ++++++++++++++++++++++-
 drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 +-
 include/dt-bindings/clock/sun4i-a10-ccu.h |  200 +++-
 include/dt-bindings/clock/sun7i-a20-ccu.h |   53 +-
 include/dt-bindings/reset/sun4i-a10-ccu.h |   69 +-
 7 files changed, 1851 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
 create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
 create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
 create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 7342928..1b5cea9 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUNXI_A10_CCU
+	bool "Support for the Allwinner A10/A20 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN4I
+	default MACH_SUN7I
+	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
 config SUN5I_CCU
 	bool "Support for the Allwinner sun5i family CCM"
 	default MACH_SUN5I
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0c45fa5..01e958c 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
+obj-$(CONFIG_SUNXI_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_A83T_CCU)	+= ccu-sun8i-a83t.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..09e97d7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
@@ -0,0 +1,1454 @@
+/*
+ * Copyright (c) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>.
+ * Copyright (c) 2017 Maxime Ripard.
+ * Copyright (c) 2017 Jonathan Liu.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun4i-a10.h"
+
+static struct ccu_nkmp pll_core_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-core",
+					      "hosc",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN4I_PLL_AUDIO_REG	0x008
+static struct ccu_nm pll_audio_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+	.m		= _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+	.common		= {
+		.reg		= 0x008,
+		.hw.init	= CLK_HW_INIT("pll-audio-base",
+					      "hosc",
+					      &ccu_nm_ops,
+					      0),
+	},
+
+};
+
+static struct ccu_mult pll_video0_clk = {
+	.enable		= BIT(31),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+	.frac		= _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+					  270000000, 297000000),
+	.common		= {
+		.reg		= 0x010,
+		.features	= (CCU_FEATURE_FRACTIONAL |
+				   CCU_FEATURE_ALL_PREDIV),
+		.prediv		= 8,
+		.hw.init	= CLK_HW_INIT("pll-video0",
+					      "hosc",
+					      &ccu_mult_ops,
+					      0),
+	},
+};
+
+static struct ccu_nkmp pll_ve_sun4i_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.common		= {
+		.reg		= 0x018,
+		.hw.init	= CLK_HW_INIT("pll-ve",
+					      "hosc",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_ve_sun7i_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x018,
+		.hw.init	= CLK_HW_INIT("pll-ve",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x020,
+		.hw.init	= CLK_HW_INIT("pll-ddr-base",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2,
+		   CLK_IS_CRITICAL);
+
+static struct ccu_div pll_ddr_other_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.common		= {
+		.reg		= 0x020,
+		.hw.init	= CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_periph_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x028,
+		.hw.init	= CLK_HW_INIT("pll-periph-base",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static CLK_FIXED_FACTOR(pll_periph_clk, "pll-periph", "pll-periph-base",
+			2, 1, CLK_SET_RATE_PARENT);
+
+/* Not documented on A10 */
+static struct ccu_div pll_periph_sata_clk = {
+	.enable		= BIT(14),
+	.div		= _SUNXI_CCU_DIV(0, 2),
+	.fixed_post_div	= 6,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph-sata",
+					      "pll-periph-base",
+					      &ccu_div_ops, 0),
+	},
+};
+
+static struct ccu_mult pll_video1_clk = {
+	.enable		= BIT(31),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+	.frac		= _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+				  270000000, 297000000),
+	.common		= {
+		.reg		= 0x030,
+		.features	= (CCU_FEATURE_FRACTIONAL |
+				   CCU_FEATURE_ALL_PREDIV),
+		.prediv		= 8,
+		.hw.init	= CLK_HW_INIT("pll-video1",
+					      "hosc",
+					      &ccu_mult_ops,
+					      0),
+	},
+};
+
+/* Not present on A10 */
+static struct ccu_nk pll_gpu_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x040,
+		.hw.init	= CLK_HW_INIT("pll-gpu",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static SUNXI_CCU_GATE(hosc_clk,	"hosc",	"osc24M", 0x050, BIT(0), 0);
+
+static const char *const cpu_parents[] = { "osc32k", "hosc",
+					   "pll-core", "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+	{ .index = 3, .div = 3, },
+};
+
+#define SUN4I_AHB_REG		0x054
+static struct ccu_mux cpu_clk = {
+	.mux		= {
+		.shift		= 16,
+		.width		= 2,
+		.fixed_predivs	= cpu_predivs,
+		.n_predivs	= ARRAY_SIZE(cpu_predivs),
+	},
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("cpu",
+						      cpu_parents,
+						      &ccu_mux_ops,
+						      CLK_IS_CRITICAL),
+	}
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static struct ccu_div ahb_sun4i_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.common		= {
+		.reg		= 0x054,
+		.hw.init	= CLK_HW_INIT("ahb", "axi", &ccu_div_ops, 0),
+	},
+};
+
+static const char *const ahb_sun7i_parents[] = { "axi", "pll-periph",
+						 "pll-periph" };
+static const struct ccu_mux_fixed_prediv ahb_sun7i_predivs[] = {
+	{ .index = 1, .div = 2, },
+	{ /* Sentinel */ },
+};
+static struct ccu_div ahb_sun7i_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= {
+		.shift		= 6,
+		.width		= 2,
+		.fixed_predivs	= ahb_sun7i_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb_sun7i_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb",
+						      ahb_sun7i_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb0_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+			   0x054, 8, 2, apb0_div_table, 0);
+
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk,	"axi-dram",	"ahb",
+		      0x05c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk,	"ahb-otg",	"ahb",
+		      0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk,	"ahb-ehci0",	"ahb",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk,	"ahb-ohci0",	"ahb",
+		      0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk,	"ahb-ehci1",	"ahb",
+		      0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk,	"ahb-ohci1",	"ahb",
+		      0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk,	"ahb-ss",	"ahb",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk,	"ahb-dma",	"ahb",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk,	"ahb-bist",	"ahb",
+		      0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk,	"ahb-mmc0",	"ahb",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk,	"ahb-mmc1",	"ahb",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk,	"ahb-mmc2",	"ahb",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk,	"ahb-mmc3",	"ahb",
+		      0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk,	"ahb-ms",	"ahb",
+		      0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk,	"ahb-nand",	"ahb",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk,	"ahb-sdram",	"ahb",
+		      0x060, BIT(14), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(ahb_ace_clk,	"ahb-ace",	"ahb",
+		      0x060, BIT(16), 0);
+static SUNXI_CCU_GATE(ahb_emac_clk,	"ahb-emac",	"ahb",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk,	"ahb-ts",	"ahb",
+		      0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk,	"ahb-spi0",	"ahb",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk,	"ahb-spi1",	"ahb",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk,	"ahb-spi2",	"ahb",
+		      0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_spi3_clk,	"ahb-spi3",	"ahb",
+		      0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(ahb_pata_clk,	"ahb-pata",	"ahb",
+		      0x060, BIT(24), 0);
+/* Not documented on A20 */
+static SUNXI_CCU_GATE(ahb_sata_clk,	"ahb-sata",	"ahb",
+		      0x060, BIT(25), 0);
+/* Not present on A20 */
+static SUNXI_CCU_GATE(ahb_gps_clk,	"ahb-gps",	"ahb",
+		      0x060, BIT(26), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hstimer_clk,	"ahb-hstimer",	"ahb",
+		      0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk,	"ahb-ve",	"ahb",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tvd_clk,	"ahb-tvd",	"ahb",
+		      0x064, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_tve0_clk,	"ahb-tve0",	"ahb",
+		      0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_tve1_clk,	"ahb-tve1",	"ahb",
+		      0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_lcd0_clk,	"ahb-lcd0",	"ahb",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_lcd1_clk,	"ahb-lcd1",	"ahb",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_csi0_clk,	"ahb-csi0",	"ahb",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_csi1_clk,	"ahb-csi1",	"ahb",
+		      0x064, BIT(9), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hdmi1_clk,	"ahb-hdmi1",	"ahb",
+		      0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_hdmi0_clk,	"ahb-hdmi0",	"ahb",
+		      0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be0_clk,	"ahb-de-be0",	"ahb",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_be1_clk,	"ahb-de-be1",	"ahb",
+		      0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_de_fe0_clk,	"ahb-de-fe0",	"ahb",
+		      0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_de_fe1_clk,	"ahb-de-fe1",	"ahb",
+		      0x064, BIT(15), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_gmac_clk,	"ahb-gmac",	"ahb",
+		      0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_mp_clk,	"ahb-mp",	"ahb",
+		      0x064, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk,	"ahb-gpu",	"ahb",
+		      0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk,	"apb0-codec",	"apb0",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk,	"apb0-spdif",	"apb0",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_ac97_clk,	"apb0-ac97",	"apb0",
+		      0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_i2s0_clk,	"apb0-i2s0",	"apb0",
+		      0x068, BIT(3), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s1_clk,	"apb0-i2s1",	"apb0",
+		      0x068, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk,	"apb0-pio",	"apb0",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir0_clk,	"apb0-ir0",	"apb0",
+		      0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_ir1_clk,	"apb0-ir1",	"apb0",
+		      0x068, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s2_clk,	"apb0-i2s2",	"apb0",
+		      0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk,	"apb0-keypad",	"apb0",
+		      0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk,	"apb1-i2c0",	"apb1",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk,	"apb1-i2c1",	"apb1",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk,	"apb1-i2c2",	"apb1",
+		      0x06c, BIT(2), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c3_clk,	"apb1-i2c3",	"apb1",
+		      0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(apb1_can_clk,	"apb1-can",	"apb1",
+		      0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(apb1_scr_clk,	"apb1-scr",	"apb1",
+		      0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(apb1_ps20_clk,	"apb1-ps20",	"apb1",
+		      0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(apb1_ps21_clk,	"apb1-ps21",	"apb1",
+		      0x06c, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c4_clk,	"apb1-i2c4",	"apb1",
+		      0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk,	"apb1-uart0",	"apb1",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk,	"apb1-uart1",	"apb1",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk,	"apb1-uart2",	"apb1",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk,	"apb1-uart3",	"apb1",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(apb1_uart4_clk,	"apb1-uart4",	"apb1",
+		      0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(apb1_uart5_clk,	"apb1-uart5",	"apb1",
+		      0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(apb1_uart6_clk,	"apb1-uart6",	"apb1",
+		      0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(apb1_uart7_clk,	"apb1-uart7",	"apb1",
+		      0x06c, BIT(23), 0);
+
+static const char *const mod0_default_parents[] = { "hosc", "pll-periph",
+						     "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(ms_clk, "ms", mod0_default_parents, 0x084,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3_output", "mmc3",
+		       0x094, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3_sample", "mmc3",
+		       0x094, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(pata_clk, "pata", mod0_default_parents, 0x0ac,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* TODO: Check whether A10 actually supports osc32k as 4th parent? */
+static const char *const ir_parents_sun4i[] = { "hosc", "pll-periph",
+						"pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun4i_clk, "ir0", ir_parents_sun4i, 0x0b0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun4i_clk, "ir1", ir_parents_sun4i, 0x0b4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+static const char *const ir_parents_sun7i[] = { "hosc", "pll-periph",
+						"pll-ddr-other", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun7i_clk, "ir0", ir_parents_sun7i, 0x0b0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun7i_clk, "ir1", ir_parents_sun7i, 0x0b4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char *const audio_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					      "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", audio_parents,
+			       0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", audio_parents,
+			       0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", audio_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(0, 5),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.mux		= _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+	.common		= {
+		.reg		= 0x0c4,
+		.hw.init	= CLK_HW_INIT_PARENTS("keypad",
+						      keypad_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+
+/*
+ * SATA supports external clock as parent via BIT(24) and is probably an
+ * optional crystal or oscillator that can be connected to the
+ * SATA-CLKM / SATA-CLKP pins.
+ */
+static const char *const sata_parents[] = {"pll-periph-sata", "sata-ext"};
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+			       0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"pll-periph",
+		      0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk,	"usb-ohci1",	"pll-periph",
+		      0x0cc, BIT(7), 0);
+static SUNXI_CCU_GATE(usb_phy_clk,	"usb-phy",	"pll-periph",
+		      0x0cc, BIT(8), 0);
+
+/* TODO: GPS CLK 0x0d0 */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0d4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", audio_parents,
+			       0x0d8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", audio_parents,
+			       0x0dc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"pll-ddr",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk,	"dram-csi0",	"pll-ddr",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk,	"dram-csi1",	"pll-ddr",
+		      0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"pll-ddr",
+		      0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk,	"dram-tvd",	"pll-ddr",
+		      0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_tve0_clk,	"dram-tve0",	"pll-ddr",
+		      0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_tve1_clk,	"dram-tve1",	"pll-ddr",
+		      0x100, BIT(6), 0);
+
+/* Clock seems to be critical only on sun4i */
+static SUNXI_CCU_GATE(dram_out_clk,	"dram-out",	"pll-ddr",
+		      0x100, BIT(15), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(dram_de_fe1_clk,	"dram-de-fe1",	"pll-ddr",
+		      0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_fe0_clk,	"dram-de-fe0",	"pll-ddr",
+		      0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be0_clk,	"dram-de-be0",	"pll-ddr",
+		      0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_de_be1_clk,	"dram-de-be1",	"pll-ddr",
+		      0x100, BIT(27), 0);
+static SUNXI_CCU_GATE(dram_mp_clk,	"dram-mp",	"pll-ddr",
+		      0x100, BIT(28), 0);
+static SUNXI_CCU_GATE(dram_ace_clk,	"dram-ace",	"pll-ddr",
+		      0x100, BIT(29), 0);
+
+static const char *const de_parents[] = { "pll-video0", "pll-video1",
+					   "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be0_clk, "de-be0", de_parents,
+				 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be1_clk, "de-be1", de_parents,
+				 0x108, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe0_clk, "de-fe0", de_parents,
+				 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe1_clk, "de-fe1", de_parents,
+				 0x110, 0, 4, 24, 2, BIT(31), 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+				 0x114, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const disp_parents[] = { "pll-video0", "pll-video1",
+					    "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_ch0_clk, "tcon0-ch0-sclk", disp_parents,
+			       0x118, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_ch0_clk, "tcon1-ch0-sclk", disp_parents,
+			       0x11c, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const csi_sclk_parents[] = { "pll-video0", "pll-ve",
+						"pll-ddr-other", "pll-periph" };
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk",
+				 csi_sclk_parents,
+				 0x120, 0, 4, 24, 2, BIT(31), 0);
+
+/* TVD clock setup for A10 */
+static const char *const tvd_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tvd_sun4i_clk, "tvd", tvd_parents,
+			       0x128, 24, 1, BIT(31), 0);
+
+/* TVD clock setup for A20 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(tvd_sclk2_sun7i_clk,
+				  "tvd-sclk2", tvd_parents,
+				  0x128,
+				  0, 4,		/* M */
+				  16, 4,	/* P */
+				  8, 1,		/* mux */
+				  BIT(15),	/* gate */
+				  0);
+
+static SUNXI_CCU_M_WITH_GATE(tvd_sclk1_sun7i_clk, "tvd-sclk1", "tvd-sclk2",
+			     0x128, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon0_ch1_sclk2_clk, "tcon0-ch1-sclk2",
+				 disp_parents,
+				 0x12c, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon0_ch1_clk,
+			     "tcon0-ch1-sclk1", "tcon0-ch1-sclk2",
+			     0x12c, 11, 1, BIT(15),
+			     CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_ch1_sclk2_clk, "tcon1-ch1-sclk2",
+				 disp_parents,
+				 0x130, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon1_ch1_clk,
+			     "tcon1-ch1-sclk1", "tcon1-ch1-sclk2",
+			     0x130, 11, 1, BIT(15),
+			     CLK_SET_RATE_PARENT);
+
+static const char *const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+					   "pll-video0-2x", "pll-video1-2x"};
+static const u8 csi_table[] = { 0, 1, 2, 5, 6};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_clk, "csi0",
+				       csi_parents, csi_table,
+				       0x134, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_clk, "csi1",
+				       csi_parents, csi_table,
+				       0x138, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c, 16, 8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc", 0x144, BIT(31), 0);
+
+static const char *const ace_parents[] = { "pll-ve", "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ace_clk, "ace", ace_parents,
+				 0x148, 0, 4, 24, 1, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", disp_parents,
+				 0x150, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static const char *const gpu_parents_sun4i[] = { "pll-video0", "pll-ve",
+						 "pll-ddr-other",
+						 "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_sun4i_clk, "gpu", gpu_parents_sun4i,
+				 0x154, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static const char *const gpu_parents_sun7i[] = { "pll-video0", "pll-ve",
+						 "pll-ddr-other", "pll-video1",
+						 "pll-gpu" };
+static const u8 gpu_table_sun7i[] = { 0, 1, 2, 3, 4 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_sun7i_clk, "gpu",
+				       gpu_parents_sun7i, gpu_table_sun7i,
+				       0x154, 0, 4, 24, 3, BIT(31),
+				       CLK_SET_RATE_PARENT);
+
+static const char *const mbus_sun4i_parents[] = { "hosc", "pll-periph",
+						  "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun4i_clk, "mbus", mbus_sun4i_parents,
+				  0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+				  0);
+static const char *const mbus_sun7i_parents[] = { "hosc", "pll-periph-base",
+						  "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun7i_clk, "mbus", mbus_sun7i_parents,
+				  0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+				  CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(hdmi1_slow_clk, "hdmi1-slow", "hosc", 0x178, BIT(31), 0);
+
+static const char *const hdmi1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 hdmi1_table[] = { 0, 1};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi1_clk, "hdmi1",
+				       hdmi1_parents, hdmi1_table,
+				       0x17c, 0, 4, 24, 2, BIT(31),
+				       CLK_SET_RATE_PARENT);
+
+static const char *const out_parents[] = { "hosc", "osc32k", "hosc" };
+static const struct ccu_mux_fixed_prediv clk_out_predivs[] = {
+	{ .index = 0, .div = 750, },
+};
+
+static struct ccu_mp out_a_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(8, 5),
+	.p		= _SUNXI_CCU_DIV(20, 2),
+	.mux		= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= clk_out_predivs,
+		.n_predivs	= ARRAY_SIZE(clk_out_predivs),
+	},
+	.common		= {
+		.reg		= 0x1f0,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("out-a",
+						      out_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+static struct ccu_mp out_b_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(8, 5),
+	.p		= _SUNXI_CCU_DIV(20, 2),
+	.mux		= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= clk_out_predivs,
+		.n_predivs	= ARRAY_SIZE(clk_out_predivs),
+	},
+	.common		= {
+		.reg		= 0x1f4,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("out-b",
+						      out_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+
+static struct ccu_common *sun4i_sun7i_ccu_clks[] = {
+	&hosc_clk.common,
+	&pll_core_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video0_clk.common,
+	&pll_ve_sun4i_clk.common,
+	&pll_ve_sun7i_clk.common,
+	&pll_ddr_base_clk.common,
+	&pll_ddr_clk.common,
+	&pll_ddr_other_clk.common,
+	&pll_periph_base_clk.common,
+	&pll_periph_sata_clk.common,
+	&pll_video1_clk.common,
+	&pll_gpu_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&axi_dram_clk.common,
+	&ahb_sun4i_clk.common,
+	&ahb_sun7i_clk.common,
+	&apb0_clk.common,
+	&apb1_clk.common,
+	&ahb_otg_clk.common,
+	&ahb_ehci0_clk.common,
+	&ahb_ohci0_clk.common,
+	&ahb_ehci1_clk.common,
+	&ahb_ohci1_clk.common,
+	&ahb_ss_clk.common,
+	&ahb_dma_clk.common,
+	&ahb_bist_clk.common,
+	&ahb_mmc0_clk.common,
+	&ahb_mmc1_clk.common,
+	&ahb_mmc2_clk.common,
+	&ahb_mmc3_clk.common,
+	&ahb_ms_clk.common,
+	&ahb_nand_clk.common,
+	&ahb_sdram_clk.common,
+	&ahb_ace_clk.common,
+	&ahb_emac_clk.common,
+	&ahb_ts_clk.common,
+	&ahb_spi0_clk.common,
+	&ahb_spi1_clk.common,
+	&ahb_spi2_clk.common,
+	&ahb_spi3_clk.common,
+	&ahb_pata_clk.common,
+	&ahb_sata_clk.common,
+	&ahb_gps_clk.common,
+	&ahb_hstimer_clk.common,
+	&ahb_ve_clk.common,
+	&ahb_tvd_clk.common,
+	&ahb_tve0_clk.common,
+	&ahb_tve1_clk.common,
+	&ahb_lcd0_clk.common,
+	&ahb_lcd1_clk.common,
+	&ahb_csi0_clk.common,
+	&ahb_csi1_clk.common,
+	&ahb_hdmi1_clk.common,
+	&ahb_hdmi0_clk.common,
+	&ahb_de_be0_clk.common,
+	&ahb_de_be1_clk.common,
+	&ahb_de_fe0_clk.common,
+	&ahb_de_fe1_clk.common,
+	&ahb_gmac_clk.common,
+	&ahb_mp_clk.common,
+	&ahb_gpu_clk.common,
+	&apb0_codec_clk.common,
+	&apb0_spdif_clk.common,
+	&apb0_ac97_clk.common,
+	&apb0_i2s0_clk.common,
+	&apb0_i2s1_clk.common,
+	&apb0_pio_clk.common,
+	&apb0_ir0_clk.common,
+	&apb0_ir1_clk.common,
+	&apb0_i2s2_clk.common,
+	&apb0_keypad_clk.common,
+	&apb1_i2c0_clk.common,
+	&apb1_i2c1_clk.common,
+	&apb1_i2c2_clk.common,
+	&apb1_i2c3_clk.common,
+	&apb1_can_clk.common,
+	&apb1_scr_clk.common,
+	&apb1_ps20_clk.common,
+	&apb1_ps21_clk.common,
+	&apb1_i2c4_clk.common,
+	&apb1_uart0_clk.common,
+	&apb1_uart1_clk.common,
+	&apb1_uart2_clk.common,
+	&apb1_uart3_clk.common,
+	&apb1_uart4_clk.common,
+	&apb1_uart5_clk.common,
+	&apb1_uart6_clk.common,
+	&apb1_uart7_clk.common,
+	&nand_clk.common,
+	&ms_clk.common,
+	&mmc0_clk.common,
+	&mmc0_output_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc1_clk.common,
+	&mmc1_output_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc2_clk.common,
+	&mmc2_output_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc3_clk.common,
+	&mmc3_output_clk.common,
+	&mmc3_sample_clk.common,
+	&ts_clk.common,
+	&ss_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&pata_clk.common,
+	&ir0_sun4i_clk.common,
+	&ir1_sun4i_clk.common,
+	&ir0_sun7i_clk.common,
+	&ir1_sun7i_clk.common,
+	&i2s0_clk.common,
+	&ac97_clk.common,
+	&spdif_clk.common,
+	&keypad_clk.common,
+	&sata_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_phy_clk.common,
+	&spi3_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi0_clk.common,
+	&dram_csi1_clk.common,
+	&dram_ts_clk.common,
+	&dram_tvd_clk.common,
+	&dram_tve0_clk.common,
+	&dram_tve1_clk.common,
+	&dram_out_clk.common,
+	&dram_de_fe1_clk.common,
+	&dram_de_fe0_clk.common,
+	&dram_de_be0_clk.common,
+	&dram_de_be1_clk.common,
+	&dram_mp_clk.common,
+	&dram_ace_clk.common,
+	&de_be0_clk.common,
+	&de_be1_clk.common,
+	&de_fe0_clk.common,
+	&de_fe1_clk.common,
+	&de_mp_clk.common,
+	&tcon0_ch0_clk.common,
+	&tcon1_ch0_clk.common,
+	&csi_sclk_clk.common,
+	&tvd_sun4i_clk.common,
+	&tvd_sclk1_sun7i_clk.common,
+	&tvd_sclk2_sun7i_clk.common,
+	&tcon0_ch1_sclk2_clk.common,
+	&tcon0_ch1_clk.common,
+	&tcon1_ch1_sclk2_clk.common,
+	&tcon1_ch1_clk.common,
+	&csi0_clk.common,
+	&csi1_clk.common,
+	&ve_clk.common,
+	&codec_clk.common,
+	&avs_clk.common,
+	&ace_clk.common,
+	&hdmi_clk.common,
+	&gpu_sun4i_clk.common,
+	&gpu_sun7i_clk.common,
+	&mbus_sun4i_clk.common,
+	&mbus_sun7i_clk.common,
+	&hdmi1_slow_clk.common,
+	&hdmi1_clk.common,
+	&out_a_clk.common,
+	&out_b_clk.common
+};
+
+/* Post-divider for pll-audio is hardcoded to 4 */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+			"pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+			"pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+
+static struct clk_hw_onecell_data sun4i_a10_hw_clks = {
+	.hws	= {
+		[CLK_HOSC]		= &hosc_clk.common.hw,
+		[CLK_PLL_CORE]		= &pll_core_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_sun4i_clk.common.hw,
+		[CLK_PLL_DDR_BASE]	= &pll_ddr_base_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_DDR_OTHER]	= &pll_ddr_other_clk.common.hw,
+		[CLK_PLL_PERIPH_BASE]	= &pll_periph_base_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.hw,
+		[CLK_PLL_PERIPH_SATA]	= &pll_periph_sata_clk.common.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AXI_DRAM]		= &axi_dram_clk.common.hw,
+		[CLK_AHB]		= &ahb_sun4i_clk.common.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_AHB_OTG]		= &ahb_otg_clk.common.hw,
+		[CLK_AHB_EHCI0]		= &ahb_ehci0_clk.common.hw,
+		[CLK_AHB_OHCI0]		= &ahb_ohci0_clk.common.hw,
+		[CLK_AHB_EHCI1]		= &ahb_ehci1_clk.common.hw,
+		[CLK_AHB_OHCI1]		= &ahb_ohci1_clk.common.hw,
+		[CLK_AHB_SS]		= &ahb_ss_clk.common.hw,
+		[CLK_AHB_DMA]		= &ahb_dma_clk.common.hw,
+		[CLK_AHB_BIST]		= &ahb_bist_clk.common.hw,
+		[CLK_AHB_MMC0]		= &ahb_mmc0_clk.common.hw,
+		[CLK_AHB_MMC1]		= &ahb_mmc1_clk.common.hw,
+		[CLK_AHB_MMC2]		= &ahb_mmc2_clk.common.hw,
+		[CLK_AHB_MMC3]		= &ahb_mmc3_clk.common.hw,
+		[CLK_AHB_MS]		= &ahb_ms_clk.common.hw,
+		[CLK_AHB_NAND]		= &ahb_nand_clk.common.hw,
+		[CLK_AHB_SDRAM]		= &ahb_sdram_clk.common.hw,
+		[CLK_AHB_ACE]		= &ahb_ace_clk.common.hw,
+		[CLK_AHB_EMAC]		= &ahb_emac_clk.common.hw,
+		[CLK_AHB_TS]		= &ahb_ts_clk.common.hw,
+		[CLK_AHB_SPI0]		= &ahb_spi0_clk.common.hw,
+		[CLK_AHB_SPI1]		= &ahb_spi1_clk.common.hw,
+		[CLK_AHB_SPI2]		= &ahb_spi2_clk.common.hw,
+		[CLK_AHB_SPI3]		= &ahb_spi3_clk.common.hw,
+		[CLK_AHB_PATA]		= &ahb_pata_clk.common.hw,
+		[CLK_AHB_SATA]		= &ahb_sata_clk.common.hw,
+		[CLK_AHB_GPS]		= &ahb_gps_clk.common.hw,
+		[CLK_AHB_VE]		= &ahb_ve_clk.common.hw,
+		[CLK_AHB_TVD]		= &ahb_tvd_clk.common.hw,
+		[CLK_AHB_TVE0]		= &ahb_tve0_clk.common.hw,
+		[CLK_AHB_TVE1]		= &ahb_tve1_clk.common.hw,
+		[CLK_AHB_LCD0]		= &ahb_lcd0_clk.common.hw,
+		[CLK_AHB_LCD1]		= &ahb_lcd1_clk.common.hw,
+		[CLK_AHB_CSI0]		= &ahb_csi0_clk.common.hw,
+		[CLK_AHB_CSI1]		= &ahb_csi1_clk.common.hw,
+		[CLK_AHB_HDMI0]		= &ahb_hdmi0_clk.common.hw,
+		[CLK_AHB_DE_BE0]	= &ahb_de_be0_clk.common.hw,
+		[CLK_AHB_DE_BE1]	= &ahb_de_be1_clk.common.hw,
+		[CLK_AHB_DE_FE0]	= &ahb_de_fe0_clk.common.hw,
+		[CLK_AHB_DE_FE1]	= &ahb_de_fe1_clk.common.hw,
+		[CLK_AHB_MP]		= &ahb_mp_clk.common.hw,
+		[CLK_AHB_GPU]		= &ahb_gpu_clk.common.hw,
+		[CLK_APB0_CODEC]	= &apb0_codec_clk.common.hw,
+		[CLK_APB0_SPDIF]	= &apb0_spdif_clk.common.hw,
+		[CLK_APB0_AC97]		= &apb0_ac97_clk.common.hw,
+		[CLK_APB0_I2S0]		= &apb0_i2s0_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR0]		= &apb0_ir0_clk.common.hw,
+		[CLK_APB0_IR1]		= &apb0_ir1_clk.common.hw,
+		[CLK_APB0_KEYPAD]	= &apb0_keypad_clk.common.hw,
+		[CLK_APB1_I2C0]		= &apb1_i2c0_clk.common.hw,
+		[CLK_APB1_I2C1]		= &apb1_i2c1_clk.common.hw,
+		[CLK_APB1_I2C2]		= &apb1_i2c2_clk.common.hw,
+		[CLK_APB1_CAN]		= &apb1_can_clk.common.hw,
+		[CLK_APB1_SCR]		= &apb1_scr_clk.common.hw,
+		[CLK_APB1_PS20]		= &apb1_ps20_clk.common.hw,
+		[CLK_APB1_PS21]		= &apb1_ps21_clk.common.hw,
+		[CLK_APB1_UART0]	= &apb1_uart0_clk.common.hw,
+		[CLK_APB1_UART1]	= &apb1_uart1_clk.common.hw,
+		[CLK_APB1_UART2]	= &apb1_uart2_clk.common.hw,
+		[CLK_APB1_UART3]	= &apb1_uart3_clk.common.hw,
+		[CLK_APB1_UART4]	= &apb1_uart4_clk.common.hw,
+		[CLK_APB1_UART5]	= &apb1_uart5_clk.common.hw,
+		[CLK_APB1_UART6]	= &apb1_uart6_clk.common.hw,
+		[CLK_APB1_UART7]	= &apb1_uart7_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MS]		= &ms_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_PATA]		= &pata_clk.common.hw,
+		[CLK_IR0]		= &ir0_sun4i_clk.common.hw,
+		[CLK_IR1]		= &ir1_sun4i_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY]		= &usb_phy_clk.common.hw,
+		/* CLK_GPS is unimplemented */
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_TVE0]		= &dram_tve0_clk.common.hw,
+		[CLK_DRAM_TVE1]		= &dram_tve1_clk.common.hw,
+		[CLK_DRAM_OUT]		= &dram_out_clk.common.hw,
+		[CLK_DRAM_DE_FE1]	= &dram_de_fe1_clk.common.hw,
+		[CLK_DRAM_DE_FE0]	= &dram_de_fe0_clk.common.hw,
+		[CLK_DRAM_DE_BE0]	= &dram_de_be0_clk.common.hw,
+		[CLK_DRAM_DE_BE1]	= &dram_de_be1_clk.common.hw,
+		[CLK_DRAM_MP]		= &dram_mp_clk.common.hw,
+		[CLK_DRAM_ACE]		= &dram_ace_clk.common.hw,
+		[CLK_DE_BE0]		= &de_be0_clk.common.hw,
+		[CLK_DE_BE1]		= &de_be1_clk.common.hw,
+		[CLK_DE_FE0]		= &de_fe0_clk.common.hw,
+		[CLK_DE_FE1]		= &de_fe1_clk.common.hw,
+		[CLK_DE_MP]		= &de_mp_clk.common.hw,
+		[CLK_TCON0_CH0]		= &tcon0_ch0_clk.common.hw,
+		[CLK_TCON1_CH0]		= &tcon1_ch0_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_TVD]		= &tvd_sun4i_clk.common.hw,
+		[CLK_TCON0_CH1_SCLK2]	= &tcon0_ch1_sclk2_clk.common.hw,
+		[CLK_TCON0_CH1]		= &tcon0_ch1_clk.common.hw,
+		[CLK_TCON1_CH1_SCLK2]	= &tcon1_ch1_sclk2_clk.common.hw,
+		[CLK_TCON1_CH1]		= &tcon1_ch1_clk.common.hw,
+		[CLK_CSI0]		= &csi0_clk.common.hw,
+		[CLK_CSI1]		= &csi1_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_GPU]		= &gpu_sun7i_clk.common.hw,
+		[CLK_MBUS]		= &mbus_sun4i_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_SUN4I,
+};
+static struct clk_hw_onecell_data sun7i_a20_hw_clks = {
+	.hws	= {
+		[CLK_HOSC]		= &hosc_clk.common.hw,
+		[CLK_PLL_CORE]		= &pll_core_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_sun7i_clk.common.hw,
+		[CLK_PLL_DDR_BASE]	= &pll_ddr_base_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_DDR_OTHER]	= &pll_ddr_other_clk.common.hw,
+		[CLK_PLL_PERIPH_BASE]	= &pll_periph_base_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.hw,
+		[CLK_PLL_PERIPH_SATA]	= &pll_periph_sata_clk.common.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB]		= &ahb_sun7i_clk.common.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_AHB_OTG]		= &ahb_otg_clk.common.hw,
+		[CLK_AHB_EHCI0]		= &ahb_ehci0_clk.common.hw,
+		[CLK_AHB_OHCI0]		= &ahb_ohci0_clk.common.hw,
+		[CLK_AHB_EHCI1]		= &ahb_ehci1_clk.common.hw,
+		[CLK_AHB_OHCI1]		= &ahb_ohci1_clk.common.hw,
+		[CLK_AHB_SS]		= &ahb_ss_clk.common.hw,
+		[CLK_AHB_DMA]		= &ahb_dma_clk.common.hw,
+		[CLK_AHB_BIST]		= &ahb_bist_clk.common.hw,
+		[CLK_AHB_MMC0]		= &ahb_mmc0_clk.common.hw,
+		[CLK_AHB_MMC1]		= &ahb_mmc1_clk.common.hw,
+		[CLK_AHB_MMC2]		= &ahb_mmc2_clk.common.hw,
+		[CLK_AHB_MMC3]		= &ahb_mmc3_clk.common.hw,
+		[CLK_AHB_MS]		= &ahb_ms_clk.common.hw,
+		[CLK_AHB_NAND]		= &ahb_nand_clk.common.hw,
+		[CLK_AHB_SDRAM]		= &ahb_sdram_clk.common.hw,
+		[CLK_AHB_ACE]		= &ahb_ace_clk.common.hw,
+		[CLK_AHB_EMAC]		= &ahb_emac_clk.common.hw,
+		[CLK_AHB_TS]		= &ahb_ts_clk.common.hw,
+		[CLK_AHB_SPI0]		= &ahb_spi0_clk.common.hw,
+		[CLK_AHB_SPI1]		= &ahb_spi1_clk.common.hw,
+		[CLK_AHB_SPI2]		= &ahb_spi2_clk.common.hw,
+		[CLK_AHB_SPI3]		= &ahb_spi3_clk.common.hw,
+		[CLK_AHB_PATA]		= &ahb_pata_clk.common.hw,
+		[CLK_AHB_SATA]		= &ahb_sata_clk.common.hw,
+		[CLK_AHB_HSTIMER]	= &ahb_hstimer_clk.common.hw,
+		[CLK_AHB_VE]		= &ahb_ve_clk.common.hw,
+		[CLK_AHB_TVD]		= &ahb_tvd_clk.common.hw,
+		[CLK_AHB_TVE0]		= &ahb_tve0_clk.common.hw,
+		[CLK_AHB_TVE1]		= &ahb_tve1_clk.common.hw,
+		[CLK_AHB_LCD0]		= &ahb_lcd0_clk.common.hw,
+		[CLK_AHB_LCD1]		= &ahb_lcd1_clk.common.hw,
+		[CLK_AHB_CSI0]		= &ahb_csi0_clk.common.hw,
+		[CLK_AHB_CSI1]		= &ahb_csi1_clk.common.hw,
+		[CLK_AHB_HDMI1]		= &ahb_hdmi1_clk.common.hw,
+		[CLK_AHB_HDMI0]		= &ahb_hdmi0_clk.common.hw,
+		[CLK_AHB_DE_BE0]	= &ahb_de_be0_clk.common.hw,
+		[CLK_AHB_DE_BE1]	= &ahb_de_be1_clk.common.hw,
+		[CLK_AHB_DE_FE0]	= &ahb_de_fe0_clk.common.hw,
+		[CLK_AHB_DE_FE1]	= &ahb_de_fe1_clk.common.hw,
+		[CLK_AHB_GMAC]		= &ahb_gmac_clk.common.hw,
+		[CLK_AHB_MP]		= &ahb_mp_clk.common.hw,
+		[CLK_AHB_GPU]		= &ahb_gpu_clk.common.hw,
+		[CLK_APB0_CODEC]	= &apb0_codec_clk.common.hw,
+		[CLK_APB0_SPDIF]	= &apb0_spdif_clk.common.hw,
+		[CLK_APB0_AC97]		= &apb0_ac97_clk.common.hw,
+		[CLK_APB0_I2S0]		= &apb0_i2s0_clk.common.hw,
+		[CLK_APB0_I2S1]		= &apb0_i2s1_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR0]		= &apb0_ir0_clk.common.hw,
+		[CLK_APB0_IR1]		= &apb0_ir1_clk.common.hw,
+		[CLK_APB0_I2S2]		= &apb0_i2s2_clk.common.hw,
+		[CLK_APB0_KEYPAD]	= &apb0_keypad_clk.common.hw,
+		[CLK_APB1_I2C0]		= &apb1_i2c0_clk.common.hw,
+		[CLK_APB1_I2C1]		= &apb1_i2c1_clk.common.hw,
+		[CLK_APB1_I2C2]		= &apb1_i2c2_clk.common.hw,
+		[CLK_APB1_I2C3]		= &apb1_i2c3_clk.common.hw,
+		[CLK_APB1_CAN]		= &apb1_can_clk.common.hw,
+		[CLK_APB1_SCR]		= &apb1_scr_clk.common.hw,
+		[CLK_APB1_PS20]		= &apb1_ps20_clk.common.hw,
+		[CLK_APB1_PS21]		= &apb1_ps21_clk.common.hw,
+		[CLK_APB1_I2C4]		= &apb1_i2c4_clk.common.hw,
+		[CLK_APB1_UART0]	= &apb1_uart0_clk.common.hw,
+		[CLK_APB1_UART1]	= &apb1_uart1_clk.common.hw,
+		[CLK_APB1_UART2]	= &apb1_uart2_clk.common.hw,
+		[CLK_APB1_UART3]	= &apb1_uart3_clk.common.hw,
+		[CLK_APB1_UART4]	= &apb1_uart4_clk.common.hw,
+		[CLK_APB1_UART5]	= &apb1_uart5_clk.common.hw,
+		[CLK_APB1_UART6]	= &apb1_uart6_clk.common.hw,
+		[CLK_APB1_UART7]	= &apb1_uart7_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MS]		= &ms_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common.hw,
+		[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_MMC3_OUTPUT]	= &mmc3_output_clk.common.hw,
+		[CLK_MMC3_SAMPLE]	= &mmc3_sample_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_PATA]		= &pata_clk.common.hw,
+		[CLK_IR0]		= &ir0_sun7i_clk.common.hw,
+		[CLK_IR1]		= &ir1_sun7i_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY]		= &usb_phy_clk.common.hw,
+		/* CLK_GPS is unimplemented */
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_TVE0]		= &dram_tve0_clk.common.hw,
+		[CLK_DRAM_TVE1]		= &dram_tve1_clk.common.hw,
+		[CLK_DRAM_OUT]		= &dram_out_clk.common.hw,
+		[CLK_DRAM_DE_FE1]	= &dram_de_fe1_clk.common.hw,
+		[CLK_DRAM_DE_FE0]	= &dram_de_fe0_clk.common.hw,
+		[CLK_DRAM_DE_BE0]	= &dram_de_be0_clk.common.hw,
+		[CLK_DRAM_DE_BE1]	= &dram_de_be1_clk.common.hw,
+		[CLK_DRAM_MP]		= &dram_mp_clk.common.hw,
+		[CLK_DRAM_ACE]		= &dram_ace_clk.common.hw,
+		[CLK_DE_BE0]		= &de_be0_clk.common.hw,
+		[CLK_DE_BE1]		= &de_be1_clk.common.hw,
+		[CLK_DE_FE0]		= &de_fe0_clk.common.hw,
+		[CLK_DE_FE1]		= &de_fe1_clk.common.hw,
+		[CLK_DE_MP]		= &de_mp_clk.common.hw,
+		[CLK_TCON0_CH0]		= &tcon0_ch0_clk.common.hw,
+		[CLK_TCON1_CH0]		= &tcon1_ch0_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_TVD_SCLK2]		= &tvd_sclk2_sun7i_clk.common.hw,
+		[CLK_TVD]		= &tvd_sclk1_sun7i_clk.common.hw,
+		[CLK_TCON0_CH1_SCLK2]	= &tcon0_ch1_sclk2_clk.common.hw,
+		[CLK_TCON0_CH1]		= &tcon0_ch1_clk.common.hw,
+		[CLK_TCON1_CH1_SCLK2]	= &tcon1_ch1_sclk2_clk.common.hw,
+		[CLK_TCON1_CH1]		= &tcon1_ch1_clk.common.hw,
+		[CLK_CSI0]		= &csi0_clk.common.hw,
+		[CLK_CSI1]		= &csi1_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_GPU]		= &gpu_sun7i_clk.common.hw,
+		[CLK_MBUS]		= &mbus_sun7i_clk.common.hw,
+		[CLK_HDMI1_SLOW]	= &hdmi1_slow_clk.common.hw,
+		[CLK_HDMI1]		= &hdmi1_clk.common.hw,
+		[CLK_OUT_A]		= &out_a_clk.common.hw,
+		[CLK_OUT_B]		= &out_b_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_SUN7I,
+};
+
+static struct ccu_reset_map sunxi_a10_a20_ccu_resets[] = {
+	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
+	[RST_GPS]		= { 0x0d0, BIT(0) },
+	[RST_DE_BE0]		= { 0x104, BIT(30) },
+	[RST_DE_BE1]		= { 0x108, BIT(30) },
+	[RST_DE_FE0]		= { 0x10c, BIT(30) },
+	[RST_DE_FE1]		= { 0x110, BIT(30) },
+	[RST_DE_MP]		= { 0x114, BIT(30) },
+	[RST_TVE0]		= { 0x118, BIT(29) },
+	[RST_TCON0]		= { 0x118, BIT(30) },
+	[RST_TVE1]		= { 0x11c, BIT(29) },
+	[RST_TCON1]		= { 0x11c, BIT(30) },
+	[RST_CSI0]		= { 0x134, BIT(30) },
+	[RST_CSI1]		= { 0x138, BIT(30) },
+	[RST_VE]		= { 0x13c, BIT(0) },
+	[RST_ACE]		= { 0x148, BIT(16) },
+	[RST_LVDS]		= { 0x14c, BIT(0) },
+	[RST_GPU]		= { 0x154, BIT(30) },
+	[RST_HDMI_H]		= { 0x170, BIT(0) },
+	[RST_HDMI_SYS]		= { 0x170, BIT(1) },
+	[RST_HDMI_AUDIO_DMA]	= { 0x170, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun4i_a10_ccu_desc = {
+	.ccu_clks	= sun4i_sun7i_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+	.hw_clks	= &sun4i_a10_hw_clks,
+
+	.resets		= sunxi_a10_a20_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sunxi_a10_a20_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
+	.ccu_clks	= sun4i_sun7i_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+	.hw_clks	= &sun7i_a20_hw_clks,
+
+	.resets		= sunxi_a10_a20_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sunxi_a10_a20_ccu_resets),
+};
+
+static void __init sun4i_ccu_init(struct device_node *node,
+				  const struct sunxi_ccu_desc *desc)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN4I_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN4I_PLL_AUDIO_REG);
+
+	/*
+	 * Use the peripheral PLL6 as the AHB parent, instead of CPU /
+	 * AXI which have rate changes due to cpufreq.
+	 *
+	 * This is especially a big deal for the HS timer whose parent
+	 * clock is AHB.
+	 */
+	val = readl(reg + SUN4I_AHB_REG);
+	val &= ~GENMASK(7, 6);
+	writel(val | (2 << 6), reg + SUN4I_AHB_REG);
+
+	sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun4i_a10_ccu_setup(struct device_node *node)
+{
+	sun4i_ccu_init(node, &sun4i_a10_ccu_desc);
+}
+CLK_OF_DECLARE(sun4i_a10_ccu, "allwinner,sun4i-a10-ccu",
+	       sun4i_a10_ccu_setup);
+
+static void __init sun7i_a20_ccu_setup(struct device_node *node)
+{
+	sun4i_ccu_init(node, &sun7i_a20_ccu_desc);
+}
+CLK_OF_DECLARE(sun7i_a20_ccu, "allwinner,sun7i-a20-ccu",
+	       sun7i_a20_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.h b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
new file mode 100644
index 0000000..c5947c7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2017 Priit Laes
+ *
+ * Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN4I_A10_H_
+#define _CCU_SUN4I_A10_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/* The HOSC is exported */
+#define CLK_PLL_CORE		2
+#define CLK_PLL_AUDIO_BASE	3
+#define CLK_PLL_AUDIO		4
+#define CLK_PLL_AUDIO_2X	5
+#define CLK_PLL_AUDIO_4X	6
+#define CLK_PLL_AUDIO_8X	7
+#define CLK_PLL_VIDEO0		8
+#define CLK_PLL_VIDEO0_2X	9
+#define CLK_PLL_VE		10
+#define CLK_PLL_DDR_BASE	11
+#define CLK_PLL_DDR		12
+#define CLK_PLL_DDR_OTHER	13
+#define CLK_PLL_PERIPH_BASE	14
+#define CLK_PLL_PERIPH		15
+#define CLK_PLL_PERIPH_SATA	16
+#define CLK_PLL_VIDEO1		17
+#define CLK_PLL_VIDEO1_2X	18
+#define CLK_PLL_GPU		19
+
+/* The CPU clock is exported */
+#define CLK_AXI			21
+#define CLK_AXI_DRAM		22
+#define CLK_AHB			23
+#define CLK_APB0		24
+#define CLK_APB1		25
+
+/* AHB gates are exported (23..68) */
+/* APB0 gates are exported (69..78) */
+/* APB1 gates are exported (79..95) */
+/* IP module clocks are exported (96..128) */
+/* DRAM gates are exported (129..142)*/
+/* Media (display engine clocks & etc) are exported (143..169) */
+
+#define CLK_NUMBER_SUN4I	(CLK_MBUS + 1)
+#define CLK_NUMBER_SUN7I	(CLK_OUT_B + 1)
+
+#endif /* _CCU_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun4i-a10-ccu.h b/include/dt-bindings/clock/sun4i-a10-ccu.h
new file mode 100644
index 0000000..c5a53f3
--- /dev/null
+++ b/include/dt-bindings/clock/sun4i-a10-ccu.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN4I_A10_H_
+#define _DT_BINDINGS_CLK_SUN4I_A10_H_
+
+#define CLK_HOSC		1
+#define CLK_CPU			20
+
+/* AHB Gates */
+#define CLK_AHB_OTG		26
+#define CLK_AHB_EHCI0		27
+#define CLK_AHB_OHCI0		28
+#define CLK_AHB_EHCI1		29
+#define CLK_AHB_OHCI1		30
+#define CLK_AHB_SS		31
+#define CLK_AHB_DMA		32
+#define CLK_AHB_BIST		33
+#define CLK_AHB_MMC0		34
+#define CLK_AHB_MMC1		35
+#define CLK_AHB_MMC2		36
+#define CLK_AHB_MMC3		37
+#define CLK_AHB_MS		38
+#define CLK_AHB_NAND		39
+#define CLK_AHB_SDRAM		40
+#define CLK_AHB_ACE		41
+#define CLK_AHB_EMAC		42
+#define CLK_AHB_TS		43
+#define CLK_AHB_SPI0		44
+#define CLK_AHB_SPI1		45
+#define CLK_AHB_SPI2		46
+#define CLK_AHB_SPI3		47
+#define CLK_AHB_PATA		48
+#define CLK_AHB_SATA		49
+#define CLK_AHB_GPS		50
+#define CLK_AHB_HSTIMER		51
+#define CLK_AHB_VE		52
+#define CLK_AHB_TVD		53
+#define CLK_AHB_TVE0		54
+#define CLK_AHB_TVE1		55
+#define CLK_AHB_LCD0		56
+#define CLK_AHB_LCD1		57
+#define CLK_AHB_CSI0		58
+#define CLK_AHB_CSI1		59
+#define CLK_AHB_HDMI0		60
+#define CLK_AHB_HDMI1		61
+#define CLK_AHB_DE_BE0		62
+#define CLK_AHB_DE_BE1		63
+#define CLK_AHB_DE_FE0		64
+#define CLK_AHB_DE_FE1		65
+#define CLK_AHB_GMAC		66
+#define CLK_AHB_MP		67
+#define CLK_AHB_GPU		68
+
+/* APB0 Gates */
+#define CLK_APB0_CODEC		69
+#define CLK_APB0_SPDIF		70
+#define CLK_APB0_I2S0		71
+#define CLK_APB0_AC97		72
+#define CLK_APB0_I2S1		73
+#define CLK_APB0_PIO		74
+#define CLK_APB0_IR0		75
+#define CLK_APB0_IR1		76
+#define CLK_APB0_I2S2		77
+#define CLK_APB0_KEYPAD		78
+
+/* APB1 Gates */
+#define CLK_APB1_I2C0		79
+#define CLK_APB1_I2C1		80
+#define CLK_APB1_I2C2		81
+#define CLK_APB1_I2C3		82
+#define CLK_APB1_CAN		83
+#define CLK_APB1_SCR		84
+#define CLK_APB1_PS20		85
+#define CLK_APB1_PS21		86
+#define CLK_APB1_I2C4		87
+#define CLK_APB1_UART0		88
+#define CLK_APB1_UART1		89
+#define CLK_APB1_UART2		90
+#define CLK_APB1_UART3		91
+#define CLK_APB1_UART4		92
+#define CLK_APB1_UART5		93
+#define CLK_APB1_UART6		94
+#define CLK_APB1_UART7		95
+
+/* IP clocks */
+#define CLK_NAND		96
+#define CLK_MS			97
+#define CLK_MMC0		98
+#define CLK_MMC0_OUTPUT		99
+#define CLK_MMC0_SAMPLE		100
+#define CLK_MMC1		101
+#define CLK_MMC1_OUTPUT		102
+#define CLK_MMC1_SAMPLE		103
+#define CLK_MMC2		104
+#define CLK_MMC2_OUTPUT		105
+#define CLK_MMC2_SAMPLE		106
+#define CLK_MMC3		107
+#define CLK_MMC3_OUTPUT		108
+#define CLK_MMC3_SAMPLE		109
+#define CLK_TS			110
+#define CLK_SS			111
+#define CLK_SPI0		112
+#define CLK_SPI1		113
+#define CLK_SPI2		114
+#define CLK_PATA		115
+#define CLK_IR0			116
+#define CLK_IR1			117
+#define CLK_I2S0		118
+#define CLK_AC97		119
+#define CLK_SPDIF		120
+#define CLK_KEYPAD		121
+#define CLK_SATA		122
+#define CLK_USB_OHCI0		123
+#define CLK_USB_OHCI1		124
+#define CLK_USB_PHY		125
+#define CLK_GPS			126
+#define CLK_SPI3		127
+#define CLK_I2S1		128
+#define CLK_I2S2		129
+
+/* DRAM Gates */
+#define CLK_DRAM_VE		130
+#define CLK_DRAM_CSI0		131
+#define CLK_DRAM_CSI1		132
+#define CLK_DRAM_TS		133
+#define CLK_DRAM_TVD		134
+#define CLK_DRAM_TVE0		135
+#define CLK_DRAM_TVE1		136
+#define CLK_DRAM_OUT		137
+#define CLK_DRAM_DE_FE1		138
+#define CLK_DRAM_DE_FE0		139
+#define CLK_DRAM_DE_BE0		140
+#define CLK_DRAM_DE_BE1		141
+#define CLK_DRAM_MP		142
+#define CLK_DRAM_ACE		143
+
+/* Display Engine Clocks */
+#define CLK_DE_BE0		144
+#define CLK_DE_BE1		145
+#define CLK_DE_FE0		146
+#define CLK_DE_FE1		147
+#define CLK_DE_MP		148
+#define CLK_TCON0_CH0		149
+#define CLK_TCON1_CH0		150
+#define CLK_CSI_SCLK		151
+#define CLK_TVD_SCLK2		152
+#define CLK_TVD			153
+#define CLK_TCON0_CH1_SCLK2	154
+#define CLK_TCON0_CH1		155
+#define CLK_TCON1_CH1_SCLK2	156
+#define CLK_TCON1_CH1		157
+#define CLK_CSI0		158
+#define CLK_CSI1		159
+#define CLK_CODEC		160
+#define CLK_VE			161
+#define CLK_AVS			162
+#define CLK_ACE			163
+#define CLK_HDMI		164
+#define CLK_GPU			165
+
+#endif /* _DT_BINDINGS_CLK_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun7i-a20-ccu.h b/include/dt-bindings/clock/sun7i-a20-ccu.h
new file mode 100644
index 0000000..045a517
--- /dev/null
+++ b/include/dt-bindings/clock/sun7i-a20-ccu.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN7I_A20_H_
+#define _DT_BINDINGS_CLK_SUN7I_A20_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+
+#define CLK_MBUS		166
+#define CLK_HDMI1_SLOW		167
+#define CLK_HDMI1		168
+#define CLK_OUT_A		169
+#define CLK_OUT_B		170
+
+#endif /* _DT_BINDINGS_CLK_SUN7I_A20_H_ */
diff --git a/include/dt-bindings/reset/sun4i-a10-ccu.h b/include/dt-bindings/reset/sun4i-a10-ccu.h
new file mode 100644
index 0000000..5f4480b
--- /dev/null
+++ b/include/dt-bindings/reset/sun4i-a10-ccu.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
+#define _DT_BINDINGS_RST_SUN4I_A10_H
+
+#define	RST_USB_PHY0		1
+#define	RST_USB_PHY1		2
+#define	RST_USB_PHY2		3
+#define	RST_GPS			4
+#define	RST_DE_BE0		5
+#define	RST_DE_BE1		6
+#define	RST_DE_FE0		7
+#define	RST_DE_FE1		8
+#define	RST_DE_MP		9
+#define	RST_TVE0		10
+#define	RST_TCON0		11
+#define	RST_TVE1		12
+#define	RST_TCON1		13
+#define	RST_CSI0		14
+#define	RST_CSI1		15
+#define	RST_VE			16
+#define	RST_ACE			17
+#define	RST_LVDS		18
+#define	RST_GPU			19
+#define	RST_HDMI_H		20
+#define	RST_HDMI_SYS		21
+#define	RST_HDMI_AUDIO_DMA	22
+
+#endif /* DT_BINDINGS_RST_SUN4I_A10_H */
-- 
git-series 0.9.1

[PATCH v6 3/6] dt-bindings: List devicetree binding for the CCU of Allwinner A20

[Priit Laes]

Allwinner A20 is now driven by sunxi-ng CCU driver.

Add devicetree binding for it.

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Reviewed-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index df9fad5..81d0fa4 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding
 Required properties :
 - compatible: must contain one of the following compatibles:
 		- "allwinner,sun6i-a31-ccu"
+		- "allwinner,sun7i-a20-ccu"
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-a83t-ccu"
-- 
git-series 0.9.1

[PATCH v6 4/6] dt-bindings: List devicetree binding for the CCU of Allwinner A10

[Priit Laes]

Allwinner A10 is now driven by sunxi-ng CCU driver.

Add devicetree binding for it.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Priit Laes <plaes@plaes.org>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 81d0fa4..429168d 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
 
 Required properties :
 - compatible: must contain one of the following compatibles:
+		- "allwinner,sun4i-a10-ccu"
 		- "allwinner,sun6i-a31-ccu"
 		- "allwinner,sun7i-a20-ccu"
 		- "allwinner,sun8i-a23-ccu"
-- 
git-series 0.9.1

[PATCH v6 5/6] ARM: sun7i: Convert to CCU

[Priit Laes]

Convert sun7i-a20.dtsi to new CCU driver.

Tested on Cubietruck.

Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 719 +++-----------------------------
 1 file changed, 84 insertions(+), 635 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 96bee77..a5ca5a8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -46,8 +46,6 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 
 / {
@@ -66,9 +64,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>, <&de_be0_clk>,
-				 <&tcon0_ch1_clk>, <&dram_gates 26>;
+			clocks = <&ccu 56>, <&ccu 60>,
+				 <&ccu 62>, <&ccu 144>,
+				 <&ccu 155>, <&ccu 140>,
+				 <&ccu 164>;
 			status = "disabled";
 		};
 
@@ -76,9 +75,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&ahb_gates 36>, <&ahb_gates 44>,
-				 <&de_be0_clk>, <&tcon0_ch0_clk>,
-				 <&dram_gates 26>;
+			clocks = <&ccu 56>, <&ccu 62>,
+				 <&ccu 144>, <&ccu 149>,
+				 <&ccu 140>;
 			status = "disabled";
 		};
 
@@ -86,10 +85,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
-			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
-				 <&ahb_gates 44>,
-				 <&de_be0_clk>, <&tcon0_ch1_clk>,
-				 <&dram_gates 5>, <&dram_gates 26>;
+			clocks = <&ccu 54>, <&ccu 56>,
+				 <&ccu 62>,
+				 <&ccu 144>, <&ccu 155>,
+				 <&ccu 135>, <&ccu 140>;
 			status = "disabled";
 		};
 	};
@@ -102,7 +101,7 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&cpu>;
+			clocks = <&ccu 20>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz	  uV */
@@ -183,21 +182,11 @@
 
 		osc24M: clk@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
+			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 			clock-output-names = "osc24M";
 		};
 
-		osc3M: osc3M_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <8>;
-			clock-mult = <1>;
-			clocks = <&osc24M>;
-			clock-output-names = "osc3M";
-		};
-
 		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -205,528 +194,6 @@
 			clock-output-names = "osc32k";
 		};
 
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll2: clk@01c20008 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll2-clk";
-			reg = <0x01c20008 0x8>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll2-1x", "pll2-2x",
-					     "pll2-4x", "pll2-8x";
-		};
-
-		pll3: clk@01c20010 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll3-clk";
-			reg = <0x01c20010 0x4>;
-			clocks = <&osc3M>;
-			clock-output-names = "pll3";
-		};
-
-		pll3x2: pll3x2_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&pll3>;
-			clock-div = <1>;
-			clock-mult = <2>;
-			clock-output-names = "pll3-2x";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-pll4-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6",
-					     "pll6_div_4";
-		};
-
-		pll7: clk@01c20030 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll3-clk";
-			reg = <0x01c20030 0x4>;
-			clocks = <&osc3M>;
-			clock-output-names = "pll7";
-		};
-
-		pll7x2: pll7x2_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&pll7>;
-			clock-div = <1>;
-			clock-mult = <2>;
-			clock-output-names = "pll7-2x";
-		};
-
-		pll8: clk@01c20040 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-pll4-clk";
-			reg = <0x01c20040 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll8";
-		};
-
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun5i-a13-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>, <&pll6 3>, <&pll6 1>;
-			clock-output-names = "ahb";
-			/*
-			 * Use PLL6 as parent, instead of CPU/AXI
-			 * which has rate changes due to cpufreq
-			 */
-			assigned-clocks = <&ahb>;
-			assigned-clock-parents = <&pll6 3>;
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-indices = <0>, <1>,
-					<2>, <3>, <4>,
-					<5>, <6>, <7>, <8>,
-					<9>, <10>, <11>, <12>,
-					<13>, <14>, <16>,
-					<17>, <18>, <20>, <21>,
-					<22>, <23>, <25>,
-					<28>, <32>, <33>, <34>,
-					<35>, <36>, <37>, <40>,
-					<41>, <42>, <43>,
-					<44>, <45>, <46>,
-					<47>, <49>, <50>,
-					<52>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
-				"ahb_nand", "ahb_sdram", "ahb_ace",
-				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
-				"ahb_spi2", "ahb_spi3", "ahb_sata",
-				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
-				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
-				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
-				"ahb_mali";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-indices = <0>, <1>,
-					<2>, <3>, <4>,
-					<5>, <6>, <7>,
-					<8>, <10>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
-				"apb0_pio", "apb0_ir0", "apb0_ir1",
-				"apb0_i2s2", "apb0_keypad";
-		};
-
-		apb1: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <1>,
-					<2>, <3>, <4>,
-					<5>, <6>, <7>,
-					<15>, <16>, <17>,
-					<18>, <19>, <20>,
-					<21>, <22>, <23>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_i2c3", "apb1_can",
-				"apb1_scr", "apb1_ps20", "apb1_ps21",
-				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
-				"apb1_uart2", "apb1_uart3", "apb1_uart4",
-				"apb1_uart5", "apb1_uart6", "apb1_uart7";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3",
-					     "mmc3_output",
-					     "mmc3_sample";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		pata_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "pata";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		ir1_clk: clk@01c200b4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir1";
-		};
-
-		i2s0_clk: clk@01c200b8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod1-clk";
-			reg = <0x01c200b8 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
-				 <&pll2 SUN4I_A10_PLL2_4X>,
-				 <&pll2 SUN4I_A10_PLL2_2X>,
-				 <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "i2s0";
-		};
-
-		ac97_clk: clk@01c200bc {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod1-clk";
-			reg = <0x01c200bc 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
-				 <&pll2 SUN4I_A10_PLL2_4X>,
-				 <&pll2 SUN4I_A10_PLL2_2X>,
-				 <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "ac97";
-		};
-
-		spdif_clk: clk@01c200c0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod1-clk";
-			reg = <0x01c200c0 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
-				 <&pll2 SUN4I_A10_PLL2_4X>,
-				 <&pll2 SUN4I_A10_PLL2_2X>,
-				 <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "spdif";
-		};
-
-		keypad_clk: clk@01c200c4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200c4 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "keypad";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1",
-					     "usb_phy";
-		};
-
-		spi3_clk: clk@01c200d4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200d4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi3";
-		};
-
-		i2s1_clk: clk@01c200d8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod1-clk";
-			reg = <0x01c200d8 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
-				 <&pll2 SUN4I_A10_PLL2_4X>,
-				 <&pll2 SUN4I_A10_PLL2_2X>,
-				 <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "i2s1";
-		};
-
-		i2s2_clk: clk@01c200dc {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod1-clk";
-			reg = <0x01c200dc 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
-				 <&pll2 SUN4I_A10_PLL2_4X>,
-				 <&pll2 SUN4I_A10_PLL2_2X>,
-				 <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "i2s2";
-		};
-
-		dram_gates: clk@01c20100 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-dram-gates-clk";
-			reg = <0x01c20100 0x4>;
-			clocks = <&pll5 0>;
-			clock-indices = <0>,
-					<1>, <2>,
-					<3>,
-					<4>,
-					<5>, <6>,
-					<15>,
-					<24>, <25>,
-					<26>, <27>,
-					<28>, <29>;
-			clock-output-names = "dram_ve",
-					     "dram_csi0", "dram_csi1",
-					     "dram_ts",
-					     "dram_tvd",
-					     "dram_tve0", "dram_tve1",
-					     "dram_output",
-					     "dram_de_fe1", "dram_de_fe0",
-					     "dram_de_be0", "dram_de_be1",
-					     "dram_de_mp", "dram_ace";
-		};
-
-		de_be0_clk: clk@01c20104 {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c20104 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-be0";
-		};
-
-		de_be1_clk: clk@01c20108 {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c20108 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-be1";
-		};
-
-		de_fe0_clk: clk@01c2010c {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c2010c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-fe0";
-		};
-
-		de_fe1_clk: clk@01c20110 {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c20110 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-fe1";
-		};
-
-		tcon0_ch0_clk: clk@01c20118 {
-			#clock-cells = <0>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
-			reg = <0x01c20118 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon0-ch0-sclk";
-
-		};
-
-		tcon1_ch0_clk: clk@01c2011c {
-			#clock-cells = <0>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
-			reg = <0x01c2011c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon1-ch0-sclk";
-
-		};
-
-		tcon0_ch1_clk: clk@01c2012c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
-			reg = <0x01c2012c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon0-ch1-sclk";
-
-		};
-
-		tcon1_ch1_clk: clk@01c20130 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
-			reg = <0x01c20130 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon1-ch1-sclk";
-
-		};
-
-		ve_clk: clk@01c2013c {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ve-clk";
-			reg = <0x01c2013c 0x4>;
-			clocks = <&pll4>;
-			clock-output-names = "ve";
-		};
-
-		codec_clk: clk@01c20140 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-codec-clk";
-			reg = <0x01c20140 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "codec";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun5i-a13-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
-
 		/*
 		 * The following two are dummy clocks, placeholders
 		 * used in the gmac_tx clock. The gmac driver will
@@ -736,14 +203,14 @@
 		 * The actual TX clock rate is not controlled by the
 		 * gmac_tx clock.
 		 */
-		mii_phy_tx_clk: clk@2 {
+		mii_phy_tx_clk: clk@1 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <25000000>;
 			clock-output-names = "mii_phy_tx";
 		};
 
-		gmac_int_tx_clk: clk@3 {
+		gmac_int_tx_clk: clk@2 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <125000000>;
@@ -757,34 +224,6 @@
 			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
 			clock-output-names = "gmac_tx";
 		};
-
-		/*
-		 * Dummy clock used by output clocks
-		 */
-		osc24M_32k: clk@1 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <750>;
-			clock-mult = <1>;
-			clocks = <&osc24M>;
-			clock-output-names = "osc24M_32k";
-		};
-
-		clk_out_a: clk@01c201f0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-out-clk";
-			reg = <0x01c201f0 0x4>;
-			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
-			clock-output-names = "clk_out_a";
-		};
-
-		clk_out_b: clk@01c201f4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-out-clk";
-			reg = <0x01c201f4 0x4>;
-			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
-			clock-output-names = "clk_out_b";
-		};
 	};
 
 	soc@01c00000 {
@@ -841,7 +280,7 @@
 			compatible = "allwinner,sun4i-a10-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 6>;
+			clocks = <&ccu 32>;
 			#dma-cells = <2>;
 		};
 
@@ -849,7 +288,7 @@
 			compatible = "allwinner,sun4i-a10-nand";
 			reg = <0x01c03000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clocks = <&ccu 39>, <&ccu 96>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
 			dma-names = "rxtx";
@@ -862,7 +301,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clocks = <&ccu 44>, <&ccu 112>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
 			       <&dma SUN4I_DMA_DEDICATED 26>;
@@ -877,7 +316,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c06000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clocks = <&ccu 45>, <&ccu 113>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
 			       <&dma SUN4I_DMA_DEDICATED 8>;
@@ -892,7 +331,7 @@
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 17>;
+			clocks = <&ccu 42>;
 			allwinner,sram = <&emac_sram 1>;
 			status = "disabled";
 		};
@@ -908,10 +347,10 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu 34>,
+				 <&ccu 98>,
+				 <&ccu 99>,
+				 <&ccu 100>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
@@ -925,10 +364,10 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu 35>,
+				 <&ccu 101>,
+				 <&ccu 102>,
+				 <&ccu 103>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
@@ -942,10 +381,10 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu 36>,
+				 <&ccu 104>,
+				 <&ccu 105>,
+				 <&ccu 106>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
@@ -959,10 +398,10 @@
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>,
-				 <&mmc3_clk 0>,
-				 <&mmc3_clk 1>,
-				 <&mmc3_clk 2>;
+			clocks = <&ccu 37>,
+				 <&ccu 107>,
+				 <&ccu 108>,
+				 <&ccu 109>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
@@ -976,7 +415,7 @@
 		usb_otg: usb@01c13000 {
 			compatible = "allwinner,sun4i-a10-musb";
 			reg = <0x01c13000 0x0400>;
-			clocks = <&ahb_gates 0>;
+			clocks = <&ccu 26>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
 			phys = <&usbphy 0>;
@@ -991,9 +430,11 @@
 			compatible = "allwinner,sun7i-a20-usb-phy";
 			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
-			clocks = <&usb_clk 8>;
+			clocks = <&ccu 125>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			resets = <&ccu 1>,
+				 <&ccu 2>,
+				 <&ccu 3>;
 			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 			status = "disabled";
 		};
@@ -1002,7 +443,7 @@
 			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
 			reg = <0x01c14000 0x100>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 1>;
+			clocks = <&ccu 27>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -1012,7 +453,7 @@
 			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
 			reg = <0x01c14400 0x100>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			clocks = <&ccu 123>, <&ccu 28>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -1023,7 +464,7 @@
 				     "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 5>, <&ss_clk>;
+			clocks = <&ccu 31>, <&ccu 111>;
 			clock-names = "ahb", "mod";
 		};
 
@@ -1031,7 +472,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c17000 0x1000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clocks = <&ccu 46>, <&ccu 114>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
 			       <&dma SUN4I_DMA_DEDICATED 28>;
@@ -1046,7 +487,7 @@
 			compatible = "allwinner,sun4i-a10-ahci";
 			reg = <0x01c18000 0x1000>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pll6 0>, <&ahb_gates 25>;
+			clocks = <&ccu 49>, <&ccu 122>;
 			status = "disabled";
 		};
 
@@ -1054,7 +495,7 @@
 			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
 			reg = <0x01c1c000 0x100>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 3>;
+			clocks = <&ccu 29>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -1064,7 +505,7 @@
 			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			clocks = <&ccu 124>, <&ccu 30>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -1074,7 +515,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clocks = <&ccu 47>, <&ccu 127>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
 			       <&dma SUN4I_DMA_DEDICATED 30>;
@@ -1085,11 +526,20 @@
 			num-cs = <1>;
 		};
 
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun7i-a20-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu 74>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -1360,7 +810,7 @@
 			compatible = "allwinner,sun4i-a10-spdif";
 			reg = <0x01c21000 0x400>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 1>, <&spdif_clk>;
+			clocks = <&ccu 70>, <&ccu 120>;
 			clock-names = "apb", "spdif";
 			dmas = <&dma SUN4I_DMA_NORMAL 2>,
 			       <&dma SUN4I_DMA_NORMAL 2>;
@@ -1370,7 +820,7 @@
 
 		ir0: ir@01c21800 {
 			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clocks = <&ccu 75>, <&ccu 116>;
 			clock-names = "apb", "ir";
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c21800 0x40>;
@@ -1379,7 +829,7 @@
 
 		ir1: ir@01c21c00 {
 			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clocks = <&ccu 76>, <&ccu 117>;
 			clock-names = "apb", "ir";
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c21c00 0x40>;
@@ -1391,7 +841,7 @@
 			compatible = "allwinner,sun4i-a10-i2s";
 			reg = <0x01c22000 0x400>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 4>, <&i2s1_clk>;
+			clocks = <&ccu 73>, <&ccu 128>;
 			clock-names = "apb", "mod";
 			dmas = <&dma SUN4I_DMA_NORMAL 4>,
 			       <&dma SUN4I_DMA_NORMAL 4>;
@@ -1404,7 +854,7 @@
 			compatible = "allwinner,sun4i-a10-i2s";
 			reg = <0x01c22400 0x400>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 3>, <&i2s0_clk>;
+			clocks = <&ccu 71>, <&ccu 118>;
 			clock-names = "apb", "mod";
 			dmas = <&dma SUN4I_DMA_NORMAL 3>,
 			       <&dma SUN4I_DMA_NORMAL 3>;
@@ -1424,7 +874,7 @@
 			compatible = "allwinner,sun7i-a20-codec";
 			reg = <0x01c22c00 0x40>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clocks = <&ccu 69>, <&ccu 160>;
 			clock-names = "apb", "codec";
 			dmas = <&dma SUN4I_DMA_NORMAL 19>,
 			       <&dma SUN4I_DMA_NORMAL 19>;
@@ -1442,7 +892,7 @@
 			compatible = "allwinner,sun4i-a10-i2s";
 			reg = <0x01c24400 0x400>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 8>, <&i2s2_clk>;
+			clocks = <&ccu 77>, <&ccu 129>;
 			clock-names = "apb", "mod";
 			dmas = <&dma SUN4I_DMA_NORMAL 6>,
 			       <&dma SUN4I_DMA_NORMAL 6>;
@@ -1463,7 +913,7 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
+			clocks = <&ccu 88>;
 			status = "disabled";
 		};
 
@@ -1473,7 +923,7 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
+			clocks = <&ccu 89>;
 			status = "disabled";
 		};
 
@@ -1483,7 +933,7 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
+			clocks = <&ccu 90>;
 			status = "disabled";
 		};
 
@@ -1493,7 +943,7 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
+			clocks = <&ccu 91>;
 			status = "disabled";
 		};
 
@@ -1503,7 +953,7 @@
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 20>;
+			clocks = <&ccu 92>;
 			status = "disabled";
 		};
 
@@ -1513,7 +963,7 @@
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 21>;
+			clocks = <&ccu 93>;
 			status = "disabled";
 		};
 
@@ -1523,7 +973,7 @@
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 22>;
+			clocks = <&ccu 94>;
 			status = "disabled";
 		};
 
@@ -1533,7 +983,7 @@
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 23>;
+			clocks = <&ccu 95>;
 			status = "disabled";
 		};
 
@@ -1541,7 +991,7 @@
 			compatible = "allwinner,sun4i-a10-ps2";
 			reg = <0x01c2a000 0x400>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 6>;
+			clocks = <&ccu 85>;
 			status = "disabled";
 		};
 
@@ -1549,7 +999,7 @@
 			compatible = "allwinner,sun4i-a10-ps2";
 			reg = <0x01c2a400 0x400>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 7>;
+			clocks = <&ccu 86>;
 			status = "disabled";
 		};
 
@@ -1558,7 +1008,7 @@
 				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 0>;
+			clocks = <&ccu 79>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1569,7 +1019,7 @@
 				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 1>;
+			clocks = <&ccu 80>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1580,7 +1030,7 @@
 				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 2>;
+			clocks = <&ccu 81>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1591,7 +1041,7 @@
 				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 3>;
+			clocks = <&ccu 82>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1602,7 +1052,7 @@
 				     "allwinner,sun4i-a10-can";
 			reg = <0x01c2bc00 0x400>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 4>;
+			clocks = <&ccu 83>;
 			status = "disabled";
 		};
 
@@ -1611,7 +1061,7 @@
 				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2c000 0x400>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 15>;
+			clocks = <&ccu 87>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1622,7 +1072,7 @@
 			reg = <0x01c50000 0x10000>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+			clocks = <&ccu 66>, <&gmac_tx_clk>;
 			clock-names = "stmmaceth", "allwinner_gmac_tx";
 			snps,pbl = <2>;
 			snps,fixed-burst;
@@ -1639,7 +1089,7 @@
 				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb_gates 28>;
+			clocks = <&ccu 51>;
 		};
 
 		gic: interrupt-controller@01c81000 {
@@ -1652,6 +1102,5 @@
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
-
 	};
 };
-- 
git-series 0.9.1

[PATCH v6 6/6] ARM: sun4i: Convert to CCU

[Priit Laes]

Convert sun4i-a10.dtsi to new CCU driver.

Tested on Gemei G9 tablet.

Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 646 +++-----------------------------
 1 file changed, 73 insertions(+), 573 deletions(-)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 41c2579..fc23c41 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,7 +45,6 @@
 
 #include <dt-bindings/thermal/thermal.h>
 
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 
 / {
@@ -64,9 +63,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>, <&de_be0_clk>,
-				 <&tcon0_ch1_clk>, <&dram_gates 26>;
+			clocks = <&ccu 56>, <&ccu 60>,
+				 <&ccu 62>, <&ccu 144>,
+				 <&ccu 155>, <&ccu 140>;
 			status = "disabled";
 		};
 
@@ -74,10 +73,11 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
-			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>, <&ahb_gates 46>,
-				 <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
-				 <&dram_gates 25>, <&dram_gates 26>;
+			clocks = <&ccu 56>, <&ccu 60>,
+				 <&ccu 62>, <&ccu 64>,
+				 <&ccu 144>, <&ccu 146>,
+				 <&ccu 155>, <&ccu 164>,
+				 <&ccu 139>, <&ccu 140>;
 			status = "disabled";
 		};
 
@@ -85,9 +85,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
-			clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
-				 <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
-				 <&dram_gates 25>, <&dram_gates 26>;
+			clocks = <&ccu 56>, <&ccu 62>,
+				 <&ccu 64>, <&ccu 144>,
+				 <&ccu 146>, <&ccu 149>,
+				 <&ccu 139>, <&ccu 140>;
 			status = "disabled";
 		};
 
@@ -95,11 +96,11 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
-			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&ahb_gates 46>,
-				 <&de_be0_clk>, <&de_fe0_clk>,
-				 <&tcon0_ch1_clk>, <&dram_gates 5>,
-				 <&dram_gates 25>, <&dram_gates 26>;
+			clocks = <&ccu 54>, <&ccu 56>,
+				 <&ccu 62>, <&ccu 64>,
+				 <&ccu 144>, <&ccu 146>,
+				 <&ccu 155>, <&ccu 135>,
+				 <&ccu 139>, <&ccu 140>;
 			status = "disabled";
 		};
 	};
@@ -111,7 +112,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a8";
 			reg = <0x0>;
-			clocks = <&cpu>;
+			clocks = <&ccu 20>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz	  uV */
@@ -167,507 +168,19 @@
 		#size-cells = <1>;
 		ranges;
 
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
 		osc24M: clk@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
+			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 			clock-output-names = "osc24M";
 		};
 
-		osc3M: osc3M_clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clocks = <&osc24M>;
-			clock-output-names = "osc3M";
-		};
-
 		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
 			clock-output-names = "osc32k";
 		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll2: clk@01c20008 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll2-clk";
-			reg = <0x01c20008 0x8>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll2-1x", "pll2-2x",
-					     "pll2-4x", "pll2-8x";
-		};
-
-		pll3: clk@01c20010 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll3-clk";
-			reg = <0x01c20010 0x4>;
-			clocks = <&osc3M>;
-			clock-output-names = "pll3";
-		};
-
-		pll3x2: pll3x2_clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <2>;
-			clocks = <&pll3>;
-			clock-output-names = "pll3-2x";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		pll7: clk@01c20030 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll3-clk";
-			reg = <0x01c20030 0x4>;
-			clocks = <&osc3M>;
-			clock-output-names = "pll7";
-		};
-
-		pll7x2: pll7x2_clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <2>;
-			clocks = <&pll7>;
-			clock-output-names = "pll7-2x";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-indices = <0>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-indices = <0>, <1>,
-					<2>, <3>,
-					<4>, <5>, <6>,
-					<7>, <8>, <9>,
-					<10>, <11>, <12>,
-					<13>, <14>, <16>,
-					<17>, <18>, <20>,
-					<21>, <22>, <23>,
-					<24>, <25>, <26>,
-					<32>, <33>, <34>,
-					<35>, <36>, <37>,
-					<40>, <41>, <43>,
-					<44>, <45>,
-					<46>, <47>,
-					<50>, <52>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-					     "ahb_ohci0", "ahb_ehci1",
-					     "ahb_ohci1", "ahb_ss", "ahb_dma",
-					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-					     "ahb_mmc2", "ahb_mmc3", "ahb_ms",
-					     "ahb_nand", "ahb_sdram", "ahb_ace",
-					     "ahb_emac", "ahb_ts", "ahb_spi0",
-					     "ahb_spi1", "ahb_spi2", "ahb_spi3",
-					     "ahb_pata", "ahb_sata", "ahb_gps",
-					     "ahb_ve", "ahb_tvd", "ahb_tve0",
-					     "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
-					     "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-					     "ahb_de_be0", "ahb_de_be1",
-					     "ahb_de_fe0", "ahb_de_fe1",
-					     "ahb_mp", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-indices = <0>, <1>,
-					<2>, <3>,
-					<5>, <6>,
-					<7>, <10>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-					     "apb0_ac97", "apb0_iis",
-					     "apb0_pio", "apb0_ir0",
-					     "apb0_ir1", "apb0_keypad";
-		};
-
-		apb1: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <1>,
-					<2>, <4>,
-					<5>, <6>,
-					<7>, <16>,
-					<17>, <18>,
-					<19>, <20>,
-					<21>, <22>,
-					<23>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-					     "apb1_i2c2", "apb1_can",
-					     "apb1_scr", "apb1_ps20",
-					     "apb1_ps21", "apb1_uart0",
-					     "apb1_uart1", "apb1_uart2",
-					     "apb1_uart3", "apb1_uart4",
-					     "apb1_uart5", "apb1_uart6",
-					     "apb1_uart7";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3",
-					     "mmc3_output",
-					     "mmc3_sample";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		pata_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "pata";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		ir1_clk: clk@01c200b4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir1";
-		};
-
-		spdif_clk: clk@01c200c0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod1-clk";
-			reg = <0x01c200c0 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
-				 <&pll2 SUN4I_A10_PLL2_4X>,
-				 <&pll2 SUN4I_A10_PLL2_2X>,
-				 <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "spdif";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1",
-					     "usb_phy";
-		};
-
-		spi3_clk: clk@01c200d4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200d4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi3";
-		};
-
-		dram_gates: clk@01c20100 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-dram-gates-clk";
-			reg = <0x01c20100 0x4>;
-			clocks = <&pll5 0>;
-			clock-indices = <0>,
-					<1>, <2>,
-					<3>,
-					<4>,
-					<5>, <6>,
-					<15>,
-					<24>, <25>,
-					<26>, <27>,
-					<28>, <29>;
-			clock-output-names = "dram_ve",
-					     "dram_csi0", "dram_csi1",
-					     "dram_ts",
-					     "dram_tvd",
-					     "dram_tve0", "dram_tve1",
-					     "dram_output",
-					     "dram_de_fe1", "dram_de_fe0",
-					     "dram_de_be0", "dram_de_be1",
-					     "dram_de_mp", "dram_ace";
-		};
-
-		de_be0_clk: clk@01c20104 {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c20104 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-be0";
-		};
-
-		de_be1_clk: clk@01c20108 {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c20108 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-be1";
-		};
-
-		de_fe0_clk: clk@01c2010c {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c2010c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-fe0";
-		};
-
-		de_fe1_clk: clk@01c20110 {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c20110 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-fe1";
-		};
-
-
-		tcon0_ch0_clk: clk@01c20118 {
-			#clock-cells = <0>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
-			reg = <0x01c20118 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon0-ch0-sclk";
-
-		};
-
-		tcon1_ch0_clk: clk@01c2011c {
-			#clock-cells = <0>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
-			reg = <0x01c2011c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon1-ch0-sclk";
-
-		};
-
-		tcon0_ch1_clk: clk@01c2012c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
-			reg = <0x01c2012c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon0-ch1-sclk";
-
-		};
-
-		tcon1_ch1_clk: clk@01c20130 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
-			reg = <0x01c20130 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon1-ch1-sclk";
-
-		};
-
-		ve_clk: clk@01c2013c {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ve-clk";
-			reg = <0x01c2013c 0x4>;
-			clocks = <&pll4>;
-			clock-output-names = "ve";
-		};
-
-		codec_clk: clk@01c20140 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-codec-clk";
-			reg = <0x01c20140 0x4>;
-			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-			clock-output-names = "codec";
-		};
 	};
 
 	soc@01c00000 {
@@ -716,7 +229,7 @@
 			compatible = "allwinner,sun4i-a10-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <27>;
-			clocks = <&ahb_gates 6>;
+			clocks = <&ccu 32>;
 			#dma-cells = <2>;
 		};
 
@@ -724,7 +237,7 @@
 			compatible = "allwinner,sun4i-a10-nand";
 			reg = <0x01c03000 0x1000>;
 			interrupts = <37>;
-			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clocks = <&ccu 39>, <&ccu 96>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
 			dma-names = "rxtx";
@@ -737,7 +250,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
 			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clocks = <&ccu 44>, <&ccu 112>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
 			       <&dma SUN4I_DMA_DEDICATED 26>;
@@ -751,7 +264,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c06000 0x1000>;
 			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clocks = <&ccu 45>, <&ccu 113>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
 			       <&dma SUN4I_DMA_DEDICATED 8>;
@@ -765,7 +278,7 @@
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
-			clocks = <&ahb_gates 17>;
+			clocks = <&ccu 42>;
 			allwinner,sram = <&emac_sram 1>;
 			status = "disabled";
 		};
@@ -781,14 +294,8 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
+			clocks = <&ccu 34>, <&ccu 98>;
+			clock-names = "ahb", "mmc";
 			interrupts = <32>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -798,14 +305,8 @@
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
+			clocks = <&ccu 35>, <&ccu 101>;
+			clock-names = "ahb", "mmc";
 			interrupts = <33>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -815,14 +316,8 @@
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
+			clocks = <&ccu 36>, <&ccu 104>;
+			clock-names = "ahb", "mmc";
 			interrupts = <34>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -832,14 +327,8 @@
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>,
-				 <&mmc3_clk 0>,
-				 <&mmc3_clk 1>,
-				 <&mmc3_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
+			clocks = <&ccu 37>, <&ccu 107>;
+			clock-names = "ahb", "mmc";
 			interrupts = <35>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -849,7 +338,7 @@
 		usb_otg: usb@01c13000 {
 			compatible = "allwinner,sun4i-a10-musb";
 			reg = <0x01c13000 0x0400>;
-			clocks = <&ahb_gates 0>;
+			clocks = <&ccu 26>;
 			interrupts = <38>;
 			interrupt-names = "mc";
 			phys = <&usbphy 0>;
@@ -864,9 +353,11 @@
 			compatible = "allwinner,sun4i-a10-usb-phy";
 			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
-			clocks = <&usb_clk 8>;
+			clocks = <&ccu 125>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			resets = <&ccu 1>,
+				 <&ccu 2>,
+				 <&ccu 3>;
 			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 			status = "disabled";
 		};
@@ -875,7 +366,7 @@
 			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
 			reg = <0x01c14000 0x100>;
 			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
+			clocks = <&ccu 27>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -885,7 +376,7 @@
 			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
 			reg = <0x01c14400 0x100>;
 			interrupts = <64>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			clocks = <&ccu 123>, <&ccu 28>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -895,7 +386,7 @@
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <86>;
-			clocks = <&ahb_gates 5>, <&ss_clk>;
+			clocks = <&ccu 31>, <&ccu 111>;
 			clock-names = "ahb", "mod";
 		};
 
@@ -903,7 +394,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c17000 0x1000>;
 			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clocks = <&ccu 46>, <&ccu 114>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
 			       <&dma SUN4I_DMA_DEDICATED 28>;
@@ -917,7 +408,7 @@
 			compatible = "allwinner,sun4i-a10-ahci";
 			reg = <0x01c18000 0x1000>;
 			interrupts = <56>;
-			clocks = <&pll6 0>, <&ahb_gates 25>;
+			clocks = <&ccu 49>, <&ccu 122>;
 			status = "disabled";
 		};
 
@@ -925,7 +416,7 @@
 			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
 			reg = <0x01c1c000 0x100>;
 			interrupts = <40>;
-			clocks = <&ahb_gates 3>;
+			clocks = <&ccu 29>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -935,7 +426,7 @@
 			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <65>;
-			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			clocks = <&ccu 124>, <&ccu 30>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -945,7 +436,7 @@
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
 			interrupts = <50>;
-			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clocks = <&ccu 47>, <&ccu 127>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
 			       <&dma SUN4I_DMA_DEDICATED 30>;
@@ -955,6 +446,15 @@
 			#size-cells = <0>;
 		};
 
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun4i-a10-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		intc: interrupt-controller@01c20400 {
 			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
@@ -966,7 +466,7 @@
 			compatible = "allwinner,sun4i-a10-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
-			clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu 74>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -1143,7 +643,7 @@
 			compatible = "allwinner,sun4i-a10-spdif";
 			reg = <0x01c21000 0x400>;
 			interrupts = <13>;
-			clocks = <&apb0_gates 1>, <&spdif_clk>;
+			clocks = <&ccu 70>, <&ccu 120>;
 			clock-names = "apb", "spdif";
 			dmas = <&dma SUN4I_DMA_NORMAL 2>,
 			       <&dma SUN4I_DMA_NORMAL 2>;
@@ -1153,7 +653,7 @@
 
 		ir0: ir@01c21800 {
 			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clocks = <&ccu 75>, <&ccu 116>;
 			clock-names = "apb", "ir";
 			interrupts = <5>;
 			reg = <0x01c21800 0x40>;
@@ -1162,7 +662,7 @@
 
 		ir1: ir@01c21c00 {
 			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clocks = <&ccu 76>, <&ccu 117>;
 			clock-names = "apb", "ir";
 			interrupts = <6>;
 			reg = <0x01c21c00 0x40>;
@@ -1181,7 +681,7 @@
 			compatible = "allwinner,sun4i-a10-codec";
 			reg = <0x01c22c00 0x40>;
 			interrupts = <30>;
-			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clocks = <&ccu 69>, <&ccu 160>;
 			clock-names = "apb", "codec";
 			dmas = <&dma SUN4I_DMA_NORMAL 19>,
 			       <&dma SUN4I_DMA_NORMAL 19>;
@@ -1207,7 +707,7 @@
 			interrupts = <1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
+			clocks = <&ccu 88>;
 			status = "disabled";
 		};
 
@@ -1217,7 +717,7 @@
 			interrupts = <2>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
+			clocks = <&ccu 89>;
 			status = "disabled";
 		};
 
@@ -1227,7 +727,7 @@
 			interrupts = <3>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
+			clocks = <&ccu 90>;
 			status = "disabled";
 		};
 
@@ -1237,7 +737,7 @@
 			interrupts = <4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
+			clocks = <&ccu 91>;
 			status = "disabled";
 		};
 
@@ -1247,7 +747,7 @@
 			interrupts = <17>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 20>;
+			clocks = <&ccu 92>;
 			status = "disabled";
 		};
 
@@ -1257,7 +757,7 @@
 			interrupts = <18>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 21>;
+			clocks = <&ccu 93>;
 			status = "disabled";
 		};
 
@@ -1267,7 +767,7 @@
 			interrupts = <19>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 22>;
+			clocks = <&ccu 94>;
 			status = "disabled";
 		};
 
@@ -1277,7 +777,7 @@
 			interrupts = <20>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb1_gates 23>;
+			clocks = <&ccu 95>;
 			status = "disabled";
 		};
 
@@ -1285,7 +785,7 @@
 			compatible = "allwinner,sun4i-a10-ps2";
 			reg = <0x01c2a000 0x400>;
 			interrupts = <62>;
-			clocks = <&apb1_gates 6>;
+			clocks = <&ccu 85>;
 			status = "disabled";
 		};
 
@@ -1293,7 +793,7 @@
 			compatible = "allwinner,sun4i-a10-ps2";
 			reg = <0x01c2a400 0x400>;
 			interrupts = <63>;
-			clocks = <&apb1_gates 7>;
+			clocks = <&ccu 86>;
 			status = "disabled";
 		};
 
@@ -1301,7 +801,7 @@
 			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
+			clocks = <&ccu 79>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1311,7 +811,7 @@
 			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
+			clocks = <&ccu 80>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1321,7 +821,7 @@
 			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
+			clocks = <&ccu 81>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1331,7 +831,7 @@
 			compatible = "allwinner,sun4i-a10-can";
 			reg = <0x01c2bc00 0x400>;
 			interrupts = <26>;
-			clocks = <&apb1_gates 4>;
+			clocks = <&ccu 83>;
 			status = "disabled";
 		};
 	};
-- 
git-series 0.9.1

Re: [PATCH v6 1/6] clk: sunxi-ng: div: Add support for fixed post-divider

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1149 bytes --]

On Fri, Jul 14, 2017 at 05:49:23PM +0300, Priit Laes wrote:
> SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
> 6 is fixed post-divider.
> 
> Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
> ---
>  drivers/clk/sunxi-ng/ccu_div.c | 15 +++++++++++++--
>  drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
>  2 files changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
> index c0e5c10..744502a 100644
> --- a/drivers/clk/sunxi-ng/ccu_div.c
> +++ b/drivers/clk/sunxi-ng/ccu_div.c
> @@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct ccu_mux_internal *mux,
>  {
>  	struct ccu_div *cd = data;
>  
> +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
> +		rate *= cd->fixed_post_div;
> +
>  	return divider_round_rate_parent(&cd->common.hw, parent,
>  					 rate, parent_rate,
>  					 cd->div.table, cd->div.width,


You still haven't addressed the biggest issue with this patch, see:
https://patchwork.kernel.org/patch/9825565/

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH v6 2/6] clk: sunxi-ng: Add sun4i/sun7i CCU driver

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2499 bytes --]

Hi,

On Fri, Jul 14, 2017 at 05:49:24PM +0300, Priit Laes wrote:
> Introduce a clock controller driver for sun4i A10 and sun7i A20
> series SoCs.
> 
> Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
> ---
>  drivers/clk/sunxi-ng/Kconfig              |   13 +-
>  drivers/clk/sunxi-ng/Makefile             |    1 +-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1454 ++++++++++++++++++++++-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 +-
>  include/dt-bindings/clock/sun4i-a10-ccu.h |  200 +++-
>  include/dt-bindings/clock/sun7i-a20-ccu.h |   53 +-
>  include/dt-bindings/reset/sun4i-a10-ccu.h |   69 +-
>  7 files changed, 1851 insertions(+)
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
>  create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
>  create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
> 
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index 7342928..1b5cea9 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -11,6 +11,19 @@ config SUN50I_A64_CCU
>  	default ARM64 && ARCH_SUNXI
>  	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>  
> +config SUNXI_A10_CCU
> +	bool "Support for the Allwinner A10/A20 CCU"
> +	select SUNXI_CCU_DIV
> +	select SUNXI_CCU_MULT
> +	select SUNXI_CCU_NK
> +	select SUNXI_CCU_NKM
> +	select SUNXI_CCU_NM
> +	select SUNXI_CCU_MP
> +	select SUNXI_CCU_PHASE
> +	default MACH_SUN4I
> +	default MACH_SUN7I
> +	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST

I'm a bit late on this one, but I agree with Olliver, it should be
called SUN4I_A10. This is what we do for all the other symbols (and it
should be ordered as such).

> +
>  config SUN5I_CCU
>  	bool "Support for the Allwinner sun5i family CCM"
>  	default MACH_SUN5I
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 0c45fa5..01e958c 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -21,6 +21,7 @@ lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
>  obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
>  obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
>  obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
> +obj-$(CONFIG_SUNXI_A10_CCU)	+= ccu-sun4i-a10.o

The ordering is wrong here too.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH v6 2/6] clk: sunxi-ng: Add sun4i/sun7i CCU driver

[Jonathan Liu]

Hi Priit,

On 15 July 2017 at 00:49, Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> wrote:
> Introduce a clock controller driver for sun4i A10 and sun7i A20
> series SoCs.
>
> Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
> ---
>  drivers/clk/sunxi-ng/Kconfig              |   13 +-
>  drivers/clk/sunxi-ng/Makefile             |    1 +-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1454 ++++++++++++++++++++++-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 +-
>  include/dt-bindings/clock/sun4i-a10-ccu.h |  200 +++-
>  include/dt-bindings/clock/sun7i-a20-ccu.h |   53 +-
>  include/dt-bindings/reset/sun4i-a10-ccu.h |   69 +-
>  7 files changed, 1851 insertions(+)
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
>  create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
>  create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h

<snip>

> diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
> new file mode 100644
> index 0000000..09e97d7
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c

<snip>

> +static void __init sun4i_ccu_init(struct device_node *node,
> +                                 const struct sunxi_ccu_desc *desc)
> +{
> +       void __iomem *reg;
> +       u32 val;
> +
> +       reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> +       if (IS_ERR(reg)) {
> +               pr_err("%s: Could not map the clock registers\n",
> +                      of_node_full_name(node));
> +               return;
> +       }
> +
> +       /* Force the PLL-Audio-1x divider to 4 */
> +       val = readl(reg + SUN4I_PLL_AUDIO_REG);

> +       val &= ~GENMASK(19, 16);
> +       writel(val | (3 << 16), reg + SUN4I_PLL_AUDIO_REG);

This doesn't work for me on A20 (440 Hz tone outputs at 880 Hz tone)
and I need to use the following instead:
       val &= ~GENMASK(29, 26);
       writel(val | (4 << 26), reg + SUN4I_PLL_AUDIO_REG);

Toggling bits 16-19 doesn't seem to have any effect on the audio for me.

Thanks.

Regards,
Jonathan

Re: [PATCH v6 1/6] clk: sunxi-ng: div: Add support for fixed post-divider

[icenowy]

在 2017-07-17 16:52，Maxime Ripard 写道：
> On Fri, Jul 14, 2017 at 05:49:23PM +0300, Priit Laes wrote:
>> SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
>> 6 is fixed post-divider.
>> 
>> Signed-off-by: Priit Laes <plaes@plaes.org>
>> ---
>>  drivers/clk/sunxi-ng/ccu_div.c | 15 +++++++++++++--
>>  drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
>>  2 files changed, 15 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/clk/sunxi-ng/ccu_div.c 
>> b/drivers/clk/sunxi-ng/ccu_div.c
>> index c0e5c10..744502a 100644
>> --- a/drivers/clk/sunxi-ng/ccu_div.c
>> +++ b/drivers/clk/sunxi-ng/ccu_div.c
>> @@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct 
>> ccu_mux_internal *mux,
>>  {
>>  	struct ccu_div *cd = data;
>> 
>> +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
>> +		rate *= cd->fixed_post_div;
>> +
>>  	return divider_round_rate_parent(&cd->common.hw, parent,
>>  					 rate, parent_rate,
>>  					 cd->div.table, cd->div.width,
> 
> 
> You still haven't addressed the biggest issue with this patch, see:
> https://patchwork.kernel.org/patch/9825565/

I think he has already did the changes suggested in the review.

(P.S. during developing R40 CCU driver I found that pll-periph0-sata
also needs this patch, so I'm rechecking it)

> 
> Maxime
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [linux-sunxi] Re: [PATCH v6 1/6] clk: sunxi-ng: div: Add support for fixed post-divider

[Chen-Yu Tsai]

On Sat, Aug 12, 2017 at 11:07 AM,  <icenowy@aosc.io> wrote:
> 在 2017-07-17 16:52，Maxime Ripard 写道：
>>
>> On Fri, Jul 14, 2017 at 05:49:23PM +0300, Priit Laes wrote:
>>>
>>> SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
>>> 6 is fixed post-divider.
>>>
>>> Signed-off-by: Priit Laes <plaes@plaes.org>
>>> ---
>>>  drivers/clk/sunxi-ng/ccu_div.c | 15 +++++++++++++--
>>>  drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
>>>  2 files changed, 15 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/clk/sunxi-ng/ccu_div.c
>>> b/drivers/clk/sunxi-ng/ccu_div.c
>>> index c0e5c10..744502a 100644
>>> --- a/drivers/clk/sunxi-ng/ccu_div.c
>>> +++ b/drivers/clk/sunxi-ng/ccu_div.c
>>> @@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct
>>> ccu_mux_internal *mux,
>>>  {
>>>         struct ccu_div *cd = data;
>>>
>>> +       if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
>>> +               rate *= cd->fixed_post_div;
>>> +
>>>         return divider_round_rate_parent(&cd->common.hw, parent,
>>>                                          rate, parent_rate,
>>>                                          cd->div.table, cd->div.width,
>>
>>
>>
>> You still haven't addressed the biggest issue with this patch, see:
>> https://patchwork.kernel.org/patch/9825565/
>
>
> I think he has already did the changes suggested in the review.

Nope. Only half of it is fixed. First you "unapply" the post-divider,
i.e. multiply the rate by the divider. Then you pass it to
divider_round_rate_parent. You still have to reapply the divider
to the result. This last part is missing. This means the clock
rate returned by ccu_div_round_rate is going to be off.

Instead the return statement should be

    return divider_round_rate_parent(...) / cd->fixed_post_div

ChenYu

>
> (P.S. during developing R40 CCU driver I found that pll-periph0-sata
> also needs this patch, so I'm rechecking it)
>
>>
>> Maxime
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

Re: Re: [PATCH v6 1/6] clk: sunxi-ng: div: Add support for fixed post-divider

[icenowy-h8G6r0blFSE]

在 2017-08-12 12:13，Chen-Yu Tsai 写道：
> On Sat, Aug 12, 2017 at 11:07 AM,  <icenowy-h8G6r0blFSE@public.gmane.org> wrote:
>> 在 2017-07-17 16:52，Maxime Ripard 写道：
>>> 
>>> On Fri, Jul 14, 2017 at 05:49:23PM +0300, Priit Laes wrote:
>>>> 
>>>> SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
>>>> 6 is fixed post-divider.
>>>> 
>>>> Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
>>>> ---
>>>>  drivers/clk/sunxi-ng/ccu_div.c | 15 +++++++++++++--
>>>>  drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
>>>>  2 files changed, 15 insertions(+), 3 deletions(-)
>>>> 
>>>> diff --git a/drivers/clk/sunxi-ng/ccu_div.c
>>>> b/drivers/clk/sunxi-ng/ccu_div.c
>>>> index c0e5c10..744502a 100644
>>>> --- a/drivers/clk/sunxi-ng/ccu_div.c
>>>> +++ b/drivers/clk/sunxi-ng/ccu_div.c
>>>> @@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct
>>>> ccu_mux_internal *mux,
>>>>  {
>>>>         struct ccu_div *cd = data;
>>>> 
>>>> +       if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
>>>> +               rate *= cd->fixed_post_div;
>>>> +
>>>>         return divider_round_rate_parent(&cd->common.hw, parent,
>>>>                                          rate, parent_rate,
>>>>                                          cd->div.table, 
>>>> cd->div.width,
>>> 
>>> 
>>> 
>>> You still haven't addressed the biggest issue with this patch, see:
>>> https://patchwork.kernel.org/patch/9825565/
>> 
>> 
>> I think he has already did the changes suggested in the review.
> 
> Nope. Only half of it is fixed. First you "unapply" the post-divider,
> i.e. multiply the rate by the divider. Then you pass it to
> divider_round_rate_parent. You still have to reapply the divider
> to the result. This last part is missing. This means the clock
> rate returned by ccu_div_round_rate is going to be off.
> 
> Instead the return statement should be
> 
>     return divider_round_rate_parent(...) / cd->fixed_post_div

Oh, got it by reading other CCU clock types that has fixed postdiv.

Thanks!

> 
> ChenYu
> 
>> 
>> (P.S. during developing R40 CCU driver I found that pll-periph0-sata
>> also needs this patch, so I'm rechecking it)
>> 
>>> 
>>> Maxime
>>> 
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>> 
>> 
>> --
>> You received this message because you are subscribed to the Google 
>> Groups
>> "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it, send 
>> an
>> email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>> For more options, visit https://groups.google.com/d/optout.
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.