Re: [PATCH V5 3/5] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 23/06/2023 19:46, Jagadeesh Kona wrote:
> Add support for the camera clock controller for camera clients to be
> able to request for camcc clocks on SM8550 platform.
> 
> Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
> Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
> ---
> Changes since v4:
>   - Removed overloading .l config with CAL_L and RINGOSC_CAL_L fields
>   - Used clk_lucid_ole_pll_configure() to configure lucid ole pll's
>   - Used module_platform_driver() instead of subsys_initcall()
> Changes since v3:
>   - No changes
> Changes since v2:
>   - No changes
> Changes since v1:
>   - Sorted the PLL names in proper order
>   - Updated all PLL configurations to lower case hex
>   - Reused evo ops instead of adding new ops for ole pll
>   - Moved few clocks to separate patch to fix patch too long error
> 
>   drivers/clk/qcom/Kconfig        |    7 +
>   drivers/clk/qcom/Makefile       |    1 +
>   drivers/clk/qcom/camcc-sm8550.c | 3383 +++++++++++++++++++++++++++++++
>   3 files changed, 3391 insertions(+)
>   create mode 100644 drivers/clk/qcom/camcc-sm8550.c

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry