Re: [PATCH v2 2/2] dt-binding: sound: atmel,pdmic: Convert to json-schema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 11/07/2022 20:30, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> 
> Convert Atmel PDMIC devicetree binding to json-schema.
> Change file naming to match json-schema naming.
> 
> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> ---
> v1 -> v2:
> - Fix title.
> - Removed trivial descriptions.
> - Fix formatting.
> 
>  .../bindings/sound/atmel,sama5d2-pdmic.yaml   | 98 +++++++++++++++++++
>  .../devicetree/bindings/sound/atmel-pdmic.txt | 55 -----------
>  2 files changed, 98 insertions(+), 55 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/atmel-pdmic.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
> new file mode 100644
> index 000000000000..88fa92a30147
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/atmel,sama5d2-pdmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel PDMIC decoder
> +
> +maintainers:
> +  - Claudiu Beznea <claudiu.beznea@microchip.com>
> +
> +description:
> +  Atmel Pulse Density Modulation Interface Controller
> +  (PDMIC) peripheral is a mono PDM decoder module
> +  that decodes an incoming PDM sample stream.
> +
> +properties:
> +  compatible:
> +    const: atmel,sama5d2-pdmic
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: peripheral clock
> +      - description: generated clock
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: gclk
> +
> +  dmas:
> +    maxItems: 1
> +
> +  dma-names:
> +    const: rx
> +
> +  atmel,mic-min-freq:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The minimal frequency that the microphone supports.
> +
> +  atmel,mic-max-freq:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The maximal frequency that the microphone supports.
> +
> +  atmel,model:
> +    description: The user-visible name of this sound card.

In previous properties the description was the last one, so keep it
consistent.

> +    $ref: /schemas/types.yaml#/definitions/string
> +    default: PDMIC
> +
> +  atmel,mic-offset:
> +    $ref: /schemas/types.yaml#/definitions/int32
> +    description: The offset that should be added.
> +    default: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - dmas
> +  - dma-names
> +  - clock-names
> +  - clocks
> +  - atmel,mic-min-freq
> +  - atmel,mic-max-freq
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/dma/at91.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    pdmic: sound@f8018000 {
> +    	compatible = "atmel,sama5d2-pdmic";

Wrong indentation. I already asked for this.


Best regards,
Krzysztof