From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Conor Dooley <conor+dt@kernel.org>,
David Airlie <airlied@gmail.com>,
Jessica Zhang <quic_jesszhan@quicinc.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Rob Herring <robh@kernel.org>, Sam Ravnborg <sam@ravnborg.org>,
Simona Vetter <simona@ffwll.ch>,
Thierry Reding <thierry.reding@gmail.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] drm/panel: simple: add Multi-Inno Technology MI0700A2T-30
Date: Thu, 12 Dec 2024 13:09:44 +0100 [thread overview]
Message-ID: <1d10a13c-edc5-4efc-8de5-95fe08b11cf6@denx.de> (raw)
In-Reply-To: <20241125013413.160725-2-marex@denx.de>
On 11/25/24 2:33 AM, Marek Vasut wrote:
> Add Multi-Inno Technology MI0700A2T-30 7" 800x480 LVDS panel support.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Simona Vetter <simona@ffwll.ch>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: devicetree@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> ---
> drivers/gpu/drm/panel/panel-simple.c | 30 ++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 06381c6282097..4e2582e1a2bd1 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -3222,6 +3222,33 @@ static const struct panel_desc mitsubishi_aa084xe01 = {
> .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
> };
>
> +static const struct display_timing multi_inno_mi0700a2t_30_timing = {
> + .pixelclock = { 26400000, 33000000, 46800000 },
> + .hactive = { 800, 800, 800 },
> + .hfront_porch = { 16, 204, 354 },
> + .hback_porch = { 46, 46, 46 },
> + .hsync_len = { 1, 6, 40 },
> + .vactive = { 480, 480, 480 },
> + .vfront_porch = { 7, 22, 147 },
> + .vback_porch = { 23, 23, 23 },
> + .vsync_len = { 1, 3, 20 },
> + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
> + DISPLAY_FLAGS_DE_HIGH,
> +};
> +
> +static const struct panel_desc multi_inno_mi0700a2t_30 = {
> + .timings = &multi_inno_mi0700a2t_30_timing,
> + .num_timings = 1,
> + .bpc = 6,
> + .size = {
> + .width = 153,
> + .height = 92,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH,
> + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> +};
> +
> static const struct display_timing multi_inno_mi0700s4t_6_timing = {
> .pixelclock = { 29000000, 33000000, 38000000 },
> .hactive = { 800, 800, 800 },
> @@ -4905,6 +4932,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "mitsubishi,aa084xe01",
> .data = &mitsubishi_aa084xe01,
> + }, {
> + .compatible = "multi-inno,mi0700a2t-30",
> + .data = &multi_inno_mi0700a2t_30,
> }, {
> .compatible = "multi-inno,mi0700s4t-6",
> .data = &multi_inno_mi0700s4t_6,
Anything I need to do /wrt this patch ?
next prev parent reply other threads:[~2024-12-12 12:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-25 1:33 [PATCH 1/2] dt-bindings: display: simple: Document Multi-Inno Technology MI0700A2T-30 panel Marek Vasut
2024-11-25 1:33 ` [PATCH 2/2] drm/panel: simple: add Multi-Inno Technology MI0700A2T-30 Marek Vasut
2024-12-12 12:09 ` Marek Vasut [this message]
2024-12-13 9:24 ` Neil Armstrong
2024-11-25 18:34 ` [PATCH 1/2] dt-bindings: display: simple: Document Multi-Inno Technology MI0700A2T-30 panel Conor Dooley
2024-12-13 9:50 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1d10a13c-edc5-4efc-8de5-95fe08b11cf6@denx.de \
--to=marex@denx.de \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=sam@ravnborg.org \
--cc=simona@ffwll.ch \
--cc=thierry.reding@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox