Re: [PATCH v10 6/8] iio: adc: adi-axi-adc: add oversampling

["Nuno Sá" <noname.nuno@gmail.com>]

On Fri, 2025-01-17 at 15:07 +0200, Antoniu Miclaus wrote:
> Add support for enabling/disabling oversampling.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> no changes in v10.
>  drivers/iio/adc/adi-axi-adc.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index 3c213ca5ff8e..ce88650bbb62 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -46,6 +46,7 @@
>  #define    ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK	BIT(1)
>  
>  #define ADI_AXI_ADC_REG_CNTRL_3			0x004c
> +#define   AD485X_CNTRL_3_OS_EN_MSK		BIT(2)
>  #define   AD485X_CNTRL_3_PACKET_FORMAT_MSK	GENMASK(1, 0)
>  #define   AD485X_PACKET_FORMAT_20BIT		0x0
>  #define   AD485X_PACKET_FORMAT_24BIT		0x1
> @@ -357,6 +358,23 @@ static int axi_adc_data_size_set(struct iio_backend
> *back, unsigned int size)
>  				 
> FIELD_PREP(AD485X_CNTRL_3_PACKET_FORMAT_MSK, val));
>  }
>  
> +static int axi_adc_oversampling_ratio_set(struct iio_backend *back,
> +					  unsigned int ratio)
> +{
> +	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> +
> +	switch (ratio) {
> +	case 0:
> +		return -EINVAL;
> +	case 1:
> +		return regmap_clear_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> +					 AD485X_CNTRL_3_OS_EN_MSK);
> +	default:
> +		return regmap_set_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> +				       AD485X_CNTRL_3_OS_EN_MSK);
> +	}
> +}
> +

So whatever the ration we just set the bits? This is odd enough that deserves a
comment IMO... (did not looked at the datasheet/wiki tbh :))

- Nuno Sá
>