* [PATCH 0/2] add support to STM LSM6DSRX 6-axis Mems sensor @ 2019-10-24 15:42 Lorenzo Bianconi 2019-10-24 15:42 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX Lorenzo Bianconi 2019-10-24 15:42 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings Lorenzo Bianconi 0 siblings, 2 replies; 6+ messages in thread From: Lorenzo Bianconi @ 2019-10-24 15:42 UTC (permalink / raw) To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree Add support to STM LSM6DSRX 6-axis sensor https://www.st.com/resource/en/datasheet/lsm6dsrx.pdf Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: add support to LSM6DSRX dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + drivers/iio/imu/st_lsm6dsx/Kconfig | 3 ++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++++---- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 3 +++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 7 files changed, 22 insertions(+), 5 deletions(-) -- 2.21.0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX 2019-10-24 15:42 [PATCH 0/2] add support to STM LSM6DSRX 6-axis Mems sensor Lorenzo Bianconi @ 2019-10-24 15:42 ` Lorenzo Bianconi 2019-10-27 16:38 ` Jonathan Cameron 2019-10-24 15:42 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings Lorenzo Bianconi 1 sibling, 1 reply; 6+ messages in thread From: Lorenzo Bianconi @ 2019-10-24 15:42 UTC (permalink / raw) To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree Add support to STM LSM6DSRX 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/lsm6dsrx.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/iio/imu/st_lsm6dsx/Kconfig | 3 ++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++++---- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 3 +++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index b425a356d99e..28f59d09208a 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -12,7 +12,8 @@ config IIO_ST_LSM6DSX Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c, - ism330dhcx, lsm6ds0 and the accelerometer/gyroscope of lsm9ds1. + ism330dhcx, lsm6dsrx, lsm6ds0 and the accelerometer/gyroscope + of lsm9ds1. To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index f660359ccb4d..37e499fe6bcf 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -27,6 +27,7 @@ #define ST_ISM330DHCX_DEV_NAME "ism330dhcx" #define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" #define ST_LSM6DS0_DEV_NAME "lsm6ds0" +#define ST_LSM6DSRX_DEV_NAME "lsm6dsrx" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID, @@ -42,6 +43,7 @@ enum st_lsm6dsx_hw_id { ST_ISM330DHCX_ID, ST_LSM9DS1_ID, ST_LSM6DS0_ID, + ST_LSM6DSRX_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index ffeb2596b97b..31cd90d2c60e 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -14,10 +14,10 @@ * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the * value of the decimation factor and ODR set for each FIFO data set. * - * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: The FIFO buffer can be - * configured to store data from gyroscope and accelerometer. Each sample - * is queued with a tag (1B) indicating data source (gyroscope, accelerometer, - * hw timer). + * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/LSM6DSRX/ISM330DHCX: + * The FIFO buffer can be configured to store data from gyroscope and + * accelerometer. Each sample is queued with a tag (1B) indicating data + * source (gyroscope, accelerometer, hw timer). * * FIFO supported modes: * - BYPASS: FIFO disabled diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index f9c83aa2c9b7..1f28a7733fc0 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -1084,6 +1084,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { }, { .hw_id = ST_ISM330DHCX_ID, .name = ST_ISM330DHCX_DEV_NAME, + }, { + .hw_id = ST_LSM6DSRX_ID, + .name = ST_LSM6DSRX_DEV_NAME, }, }, .channels = { diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index e57744affbd0..cd47ec1fedcb 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -91,6 +91,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,lsm6ds0", .data = (void *)ST_LSM6DS0_ID, }, + { + .compatible = "st,lsm6dsrx", + .data = (void *)ST_LSM6DSRX_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -109,6 +113,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, + { ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index 933d4f9f6a4a..67ff36eac247 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -91,6 +91,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,lsm6ds0", .data = (void *)ST_LSM6DS0_ID, }, + { + .compatible = "st,lsm6dsrx", + .data = (void *)ST_LSM6DSRX_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -109,6 +113,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, + { ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); -- 2.21.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX 2019-10-24 15:42 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX Lorenzo Bianconi @ 2019-10-27 16:38 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2019-10-27 16:38 UTC (permalink / raw) To: Lorenzo Bianconi; +Cc: lorenzo.bianconi, linux-iio, devicetree On Thu, 24 Oct 2019 17:42:33 +0200 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Add support to STM LSM6DSRX 6-axis (acc + gyro) Mems sensor > https://www.st.com/resource/en/datasheet/lsm6dsrx.pdf > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > drivers/iio/imu/st_lsm6dsx/Kconfig | 3 ++- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++++---- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 3 +++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ > 6 files changed, 21 insertions(+), 5 deletions(-) > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > index b425a356d99e..28f59d09208a 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -12,7 +12,8 @@ config IIO_ST_LSM6DSX > Say yes here to build support for STMicroelectronics LSM6DSx imu > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c, > - ism330dhcx, lsm6ds0 and the accelerometer/gyroscope of lsm9ds1. > + ism330dhcx, lsm6dsrx, lsm6ds0 and the accelerometer/gyroscope > + of lsm9ds1. > > To compile this driver as a module, choose M here: the module > will be called st_lsm6dsx. > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > index f660359ccb4d..37e499fe6bcf 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > @@ -27,6 +27,7 @@ > #define ST_ISM330DHCX_DEV_NAME "ism330dhcx" > #define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" > #define ST_LSM6DS0_DEV_NAME "lsm6ds0" > +#define ST_LSM6DSRX_DEV_NAME "lsm6dsrx" > > enum st_lsm6dsx_hw_id { > ST_LSM6DS3_ID, > @@ -42,6 +43,7 @@ enum st_lsm6dsx_hw_id { > ST_ISM330DHCX_ID, > ST_LSM9DS1_ID, > ST_LSM6DS0_ID, > + ST_LSM6DSRX_ID, > ST_LSM6DSX_MAX_ID, > }; > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > index ffeb2596b97b..31cd90d2c60e 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > @@ -14,10 +14,10 @@ > * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the > * value of the decimation factor and ODR set for each FIFO data set. > * > - * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: The FIFO buffer can be > - * configured to store data from gyroscope and accelerometer. Each sample > - * is queued with a tag (1B) indicating data source (gyroscope, accelerometer, > - * hw timer). > + * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/LSM6DSRX/ISM330DHCX: > + * The FIFO buffer can be configured to store data from gyroscope and > + * accelerometer. Each sample is queued with a tag (1B) indicating data > + * source (gyroscope, accelerometer, hw timer). > * > * FIFO supported modes: > * - BYPASS: FIFO disabled > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > index f9c83aa2c9b7..1f28a7733fc0 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > @@ -1084,6 +1084,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { > }, { > .hw_id = ST_ISM330DHCX_ID, > .name = ST_ISM330DHCX_DEV_NAME, > + }, { > + .hw_id = ST_LSM6DSRX_ID, > + .name = ST_LSM6DSRX_DEV_NAME, > }, > }, > .channels = { > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > index e57744affbd0..cd47ec1fedcb 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > @@ -91,6 +91,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { > .compatible = "st,lsm6ds0", > .data = (void *)ST_LSM6DS0_ID, > }, > + { > + .compatible = "st,lsm6dsrx", > + .data = (void *)ST_LSM6DSRX_ID, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); > @@ -109,6 +113,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { > { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, > { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, > { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, > + { ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID }, > {}, > }; > MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > index 933d4f9f6a4a..67ff36eac247 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > @@ -91,6 +91,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { > .compatible = "st,lsm6ds0", > .data = (void *)ST_LSM6DS0_ID, > }, > + { > + .compatible = "st,lsm6dsrx", > + .data = (void *)ST_LSM6DSRX_ID, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); > @@ -109,6 +113,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { > { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, > { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, > { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, > + { ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID }, > {}, > }; > MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings 2019-10-24 15:42 [PATCH 0/2] add support to STM LSM6DSRX 6-axis Mems sensor Lorenzo Bianconi 2019-10-24 15:42 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX Lorenzo Bianconi @ 2019-10-24 15:42 ` Lorenzo Bianconi 2019-10-27 16:40 ` Jonathan Cameron 1 sibling, 1 reply; 6+ messages in thread From: Lorenzo Bianconi @ 2019-10-24 15:42 UTC (permalink / raw) To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index fc018ecba086..cef4bc16fce1 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -15,6 +15,7 @@ Required properties: "st,ism330dhcx" "st,lsm9ds1-imu" "st,lsm6ds0" + "st,lsm6dsrx" - reg: i2c address of the sensor / spi cs line Optional properties: -- 2.21.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings 2019-10-24 15:42 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings Lorenzo Bianconi @ 2019-10-27 16:40 ` Jonathan Cameron 2019-10-27 16:57 ` Lorenzo Bianconi 0 siblings, 1 reply; 6+ messages in thread From: Jonathan Cameron @ 2019-10-27 16:40 UTC (permalink / raw) To: Lorenzo Bianconi; +Cc: lorenzo.bianconi, linux-iio, devicetree On Thu, 24 Oct 2019 17:42:34 +0200 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Applied. If you get bored and feel like converting this over to yaml at somepoint that would be great ;) Thanks, Jonathan > --- > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > index fc018ecba086..cef4bc16fce1 100644 > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > @@ -15,6 +15,7 @@ Required properties: > "st,ism330dhcx" > "st,lsm9ds1-imu" > "st,lsm6ds0" > + "st,lsm6dsrx" > - reg: i2c address of the sensor / spi cs line > > Optional properties: ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings 2019-10-27 16:40 ` Jonathan Cameron @ 2019-10-27 16:57 ` Lorenzo Bianconi 0 siblings, 0 replies; 6+ messages in thread From: Lorenzo Bianconi @ 2019-10-27 16:57 UTC (permalink / raw) To: Jonathan Cameron; +Cc: Lorenzo Bianconi, linux-iio, devicetree > > On Thu, 24 Oct 2019 17:42:34 +0200 > Lorenzo Bianconi <lorenzo@kernel.org> wrote: > > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > Applied. If you get bored and feel like converting this over > to yaml at somepoint that would be great ;) > > Thanks, ack, added to my ToDo list :) Regards, Lorenzo > > Jonathan > > > --- > > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > > index fc018ecba086..cef4bc16fce1 100644 > > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > > @@ -15,6 +15,7 @@ Required properties: > > "st,ism330dhcx" > > "st,lsm9ds1-imu" > > "st,lsm6ds0" > > + "st,lsm6dsrx" > > - reg: i2c address of the sensor / spi cs line > > > > Optional properties: > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-10-27 16:57 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-10-24 15:42 [PATCH 0/2] add support to STM LSM6DSRX 6-axis Mems sensor Lorenzo Bianconi 2019-10-24 15:42 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX Lorenzo Bianconi 2019-10-27 16:38 ` Jonathan Cameron 2019-10-24 15:42 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings Lorenzo Bianconi 2019-10-27 16:40 ` Jonathan Cameron 2019-10-27 16:57 ` Lorenzo Bianconi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).