From: Neil Armstrong <neil.armstrong@linaro.org>
To: Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH RFC 3/6] ASoC: soc: qcom: sc8280xp: add support for I2S clocks
Date: Tue, 7 Oct 2025 09:02:05 +0200 [thread overview]
Message-ID: <1eab5200-1292-4d39-bdf8-0c5084cfaab9@linaro.org> (raw)
In-Reply-To: <6492e444-4196-4900-a741-a74a8c506a6d@kernel.org>
On 10/7/25 00:21, Srinivas Kandagatla wrote:
>
>
> On 10/6/25 7:37 PM, Neil Armstrong wrote:
>> Add support for getting the I2S clocks used for the MI2S
>> interfaces, and enable/disable the clocks on the PCM
>> startup and shutdown card callbacks.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
>> sound/soc/qcom/sc8280xp.c | 104 +++++++++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 103 insertions(+), 1 deletion(-)
>>
>> diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
>> index 78e327bc2f07767b1032f09af7f45b947e7eb67a..ad4ee5c6fab8994f18de572842f3dab6f4f5397e 100644
>> --- a/sound/soc/qcom/sc8280xp.c
>> +++ b/sound/soc/qcom/sc8280xp.c
>> @@ -4,6 +4,8 @@
>> #include <dt-bindings/sound/qcom,q6afe.h>
>> #include <linux/module.h>
>> #include <linux/platform_device.h>
>> +#include <linux/clk.h>
>> +#include <linux/of_clk.h>
>> #include <sound/soc.h>
>> #include <sound/soc-dapm.h>
>> #include <sound/pcm.h>
>> @@ -15,12 +17,16 @@
>> #include "common.h"
>> #include "sdw.h"
>>
>> +#define I2S_MAX_CLKS 5
>> +
>> struct sc8280xp_snd_data {
>> bool stream_prepared[AFE_PORT_MAX];
>> struct snd_soc_card *card;
>> struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
>> struct snd_soc_jack jack;
>> struct snd_soc_jack dp_jack[8];
>> + struct clk *i2s_clk[I2S_MAX_CLKS];
>> + struct clk *i2s_mclk[I2S_MAX_CLKS];
>> bool jack_setup;
>> };
>>
>> @@ -68,12 +74,66 @@ static int sc8280xp_snd_init(struct snd_soc_pcm_runtime *rtd)
>> return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
>> }
>>
>> +static int sc8280xp_snd_i2s_index(struct snd_soc_dai *dai)
>> +{
>> + switch (dai->id) {
>> + case PRIMARY_MI2S_RX..PRIMARY_MI2S_TX:
>> + return 0;
>> + case SECONDARY_MI2S_RX.. SECONDARY_MI2S_TX:
>> + return 1;
>> + case TERTIARY_MI2S_RX..TERTIARY_MI2S_TX:
>> + return 2;
>> + case QUATERNARY_MI2S_RX..QUATERNARY_MI2S_TX:
>> + return 3;
>> + case QUINARY_MI2S_RX..QUINARY_MI2S_TX:
>> + return 4;
>> + default:
>> + return -1;
>> + }
>> +}
>> +
>> +static int sc8280xp_snd_startup(struct snd_pcm_substream *substream)
>> +{
>> + unsigned int codec_dai_fmt = SND_SOC_DAIFMT_BC_FC | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
>> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
>> + struct sc8280xp_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
>> + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
>> + struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
>> + int index;
>> +
>> + switch (cpu_dai->id) {
>> + case PRIMARY_MI2S_RX...QUATERNARY_MI2S_TX:
>> + case QUINARY_MI2S_RX...QUINARY_MI2S_TX:
>> + index = sc8280xp_snd_i2s_index(cpu_dai);
>
> What is the mclk and bitclk rate set here, we can not rely on the
> default rate.
The default rates are set in DT:
+ assigned-clocks = <&q6prmcc LPASS_CLK_ID_PRI_MI2S_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_CLK_ID_MCLK_1 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ assigned-clock-rates = <1536000>,
+ <24576000>;
Neil
> --srini
>> + clk_enable(pdata->i2s_mclk[index]);
>> + clk_enable(pdata->i2s_clk[index]);
>> + snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + return qcom_snd_sdw_startup(substream);
>> +}
>> +
>> static void sc8280xp_snd_shutdown(struct snd_pcm_substream *substream)
>> {
>> struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
>> struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
>> struct sc8280xp_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
>> struct sdw_stream_runtime *sruntime = pdata->sruntime[cpu_dai->id];
>> + int index;
>> +
>> + switch (cpu_dai->id) {
>> + case PRIMARY_MI2S_RX..TERTIARY_MI2S_RX:
>> + case QUINARY_MI2S_RX...QUINARY_MI2S_TX:
>> + index = sc8280xp_snd_i2s_index(cpu_dai);
>> + clk_disable(pdata->i2s_clk[index]);
>> + clk_disable(pdata->i2s_mclk[index]);
>> + break;
>> + default:
>> + break;
>> + }
>>
>> pdata->sruntime[cpu_dai->id] = NULL;
>> sdw_release_stream(sruntime);
>> @@ -141,7 +201,7 @@ static int sc8280xp_snd_hw_free(struct snd_pcm_substream *substream)
>> }
>>
>> static const struct snd_soc_ops sc8280xp_be_ops = {
>> - .startup = qcom_snd_sdw_startup,
>> + .startup = sc8280xp_snd_startup,
>> .shutdown = sc8280xp_snd_shutdown,
>> .hw_params = sc8280xp_snd_hw_params,
>> .hw_free = sc8280xp_snd_hw_free,
>> @@ -162,6 +222,44 @@ static void sc8280xp_add_be_ops(struct snd_soc_card *card)
>> }
>> }
>>
>> +static const char * const i2s_bus_names[I2S_MAX_CLKS] = {
>> + "primary",
>> + "secondary",
>> + "tertiary",
>> + "quaternary",
>> + "quinary",
>> +};
>> +
>> +static int sc8280xp_get_i2c_clocks(struct platform_device *pdev,
>> + struct sc8280xp_snd_data *data)
>> +{
>> + struct device *dev = &pdev->dev;
>> + int i;
>> +
>> + if (!device_property_present(dev))
>> + return 0;
>> +
>> + for (i = 0; i < I2S_MAX_CLKS; ++i) {
>> + char name[16];
>> +
>> + snprintf(name, 16, "%s-mi2s", i2s_bus_names, i);
>> + data->i2s_clk[i] = devm_clk_get_optional_prepared(dev, name);
>> + if (IS_ERR(data->i2s_clk[i]))
>> + return dev_err_probe(dev, PTR_ERR(data->i2s_clk[i]),
>> + "unable to get %s clock\n",
>> + name);
>> +
>> + snprintf(name, 16, "%s-mclk", i2s_bus_names, i);
>> + data->i2s_mclk[i] = devm_clk_get_optional_prepared(dev, name);
>> + if (IS_ERR(data->i2s_mclk[i]))
>> + return dev_err_probe(dev, PTR_ERR(data->i2s_mclk[i]),
>> + "unable to get %s clock\n",
>> + name);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> static int sc8280xp_platform_probe(struct platform_device *pdev)
>> {
>> struct snd_soc_card *card;
>> @@ -185,6 +283,10 @@ static int sc8280xp_platform_probe(struct platform_device *pdev)
>> if (ret)
>> return ret;
>>
>> + ret = sc8280xp_get_i2c_clocks(pdev, data);
>> + if (ret)
>> + return ret;
>> +
>> card->driver_name = of_device_get_match_data(dev);
>> sc8280xp_add_be_ops(card);
>> return devm_snd_soc_register_card(dev, card);
>>
>
next prev parent reply other threads:[~2025-10-07 7:02 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-06 18:37 [PATCH RFC 0/6] ASoC: qcom: enable HDMI audio on SM8[456]50 HDK boards Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 1/6] ASoC: qcom: qdsp6: q6prm: add the missing MCLK clock IDs Neil Armstrong
2025-10-06 22:13 ` Srinivas Kandagatla
2025-10-07 10:19 ` Konrad Dybcio
2025-10-06 18:37 ` [PATCH RFC 2/6] ASoC: dt-bindings: qcom,sm8250: Add clocks properties for I2S Neil Armstrong
2025-10-07 10:21 ` Konrad Dybcio
2025-10-08 17:53 ` Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 3/6] ASoC: soc: qcom: sc8280xp: add support for I2S clocks Neil Armstrong
2025-10-06 22:21 ` Srinivas Kandagatla
2025-10-07 7:02 ` Neil Armstrong [this message]
2025-10-07 10:23 ` Konrad Dybcio
2025-10-07 15:48 ` Neil Armstrong
2025-10-08 17:51 ` Neil Armstrong
2025-10-07 1:35 ` Alexey Klimov
2025-10-07 7:02 ` Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 4/6] sm8650-hdk: Enable I2S for HDMI Neil Armstrong
2025-10-07 1:39 ` Alexey Klimov
2025-10-07 7:04 ` Neil Armstrong
2025-10-07 15:39 ` Alexey Klimov
2025-10-07 10:24 ` Konrad Dybcio
2025-10-06 18:37 ` [PATCH RFC 5/6] sm8550-hdk: " Neil Armstrong
2025-10-06 18:37 ` [PATCH RFC 6/6] sm8450-hdk: " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1eab5200-1292-4d39-bdf8-0c5084cfaab9@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).