Re: [PATCH v1 1/2] dt-bindings: iio: accel: add ADXL367

[Cosmin Tanislav <demonsingur@gmail.com>]

On 12/6/21 16:39, Jonathan Cameron wrote:
> On Mon,  6 Dec 2021 12:54:02 +0200
> Cosmin Tanislav <demonsingur@gmail.com> wrote:
> 
>> The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
>>
>> The ADXL367 does not alias input signals to achieve ultralow power
>> consumption, it samples the full bandwidth of the sensor at all
>> data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
>> with a resolution of 0.25mg/LSB on the +-2 g range.
>>
>> In addition to its ultralow power consumption, the ADXL367
>> has many features to enable true system level power reduction.
>> It includes a deep multimode output FIFO, a built-in micropower
>> temperature sensor, and an internal ADC for synchronous conversion
>> of an additional analog input.
>>
>> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
> 
> Hi Cosmin,
> 
> Given how often we get patches later to add regulators for devices like
> these I'd like them supported from the start.
> 
> I'm guessing it needs power, but how many supplies? I'm not sure as doesn't
> seem to be a public datasheet yet.

I'll add them. For the note, it has two supplies, one being the main one 
and another one for the io.

> 
>> ---
>>   .../bindings/iio/accel/adi,adxl367.yaml       | 79 +++++++++++++++++++
>>   1 file changed, 79 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Docu`mentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
>> new file mode 100644
>> index 000000000000..1bf9e1602480
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
>> @@ -0,0 +1,79 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Analog Devices ADXL367 3-Axis Digital Accelerometer
>> +
>> +maintainers:
>> +  - Cosmin Tanislav <cosmin.tanislav@analog.com>
>> +
>> +description: |
>> +  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
>> +
>> +  The ADXL367 does not alias input signals by to achieve ultralow power
>> +  consumption, it samples the full bandwidth of the sensor at all
>> +  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
>> +  with a resolution of 0.25mg/LSB on the +-2 g range.
>> +
>> +  In addition to its ultralow power consumption, the ADXL367
>> +  has many features to enable true system level power reduction.
>> +  It includes a deep multimode output FIFO, a built-in micropower
>> +  temperature sensor, and an internal ADC for synchronous conversion
>> +  of an additional analog input.
>> +    https://www.analog.com/en/products/adxl367.html
> 
> "We can't find that page". I guess this driver is running slightly ahead
> of the datasheet being made public.

Yeah, the datasheet and product page isn't out yet.

> 
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - adi,adxl367
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
> 
> spi-max-frequency: true
> 
> to fix the issue Rob's bot reported.
> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +    i2c {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      adxl367@53 {
>> +        compatible = "adi,adxl367";
>> +        reg = <0x53>;
>> +        interrupt-parent = <&gpio>;
>> +        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
>> +      };
>> +    };
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> +    spi {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
>> +      status = "okay";
> 
> We don't normally list status in example bindings.
> Also, the cs-gpio is part of the spi master binding
> so no need to have it here as we are showing how the
> actual device binding works.
> 
> That should let you drop the gpio.h header.
>
Interestingly, you forgot to say this for my AD74413R driver.

> 
>> +
>> +      adxl367@0 {
>> +        compatible = "adi,adxl367";
>> +        reg = <0>;
>> +        spi-max-frequency = <1000000>;
>> +        interrupt-parent = <&gpio>;
>> +        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
>> +      };
>> +    };
>