From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
eddie.cai-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 7/7] ARM: dts: add rk3288 evaluation board
Date: Fri, 18 Jul 2014 02:21:55 +0200 [thread overview]
Message-ID: <2004020.THrDyKm3fa@diego> (raw)
In-Reply-To: <4868343.UFgjaXesOn@diego>
There exist 2 variants using either the act8846 or rk808 as pmic, while the
rest of the board stays the same.
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Tested-by: Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>
---
arch/arm/boot/dts/rk3288-evb-act8846.dts | 134 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/rk3288-evb-rk808.dts | 18 +++++
arch/arm/boot/dts/rk3288-evb.dtsi | 83 +++++++++++++++++++
3 files changed, 235 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3288-evb-act8846.dts
create mode 100644 arch/arm/boot/dts/rk3288-evb-rk808.dts
create mode 100644 arch/arm/boot/dts/rk3288-evb.dtsi
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
new file mode 100644
index 0000000..7d59ff4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -0,0 +1,134 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+};
+
+&i2c0 {
+ hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+
+ #clock-cells = <0>;
+ clock-output-names = "xin32k";
+ };
+
+ act8846: act8846@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ status = "okay";
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "VCC_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "VCCIO_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "VDD10_LCD";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcca_codec: REG7 {
+ regulator-name = "VCCA_CODEC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcca_tp: REG8 {
+ regulator-name = "VCCA_TP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccio_pmu: REG9 {
+ regulator-name = "VCCIO_PMU";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "VCC18_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
new file mode 100644
index 0000000..9a88b6c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
new file mode 100644
index 0000000..2afd4f2
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -0,0 +1,83 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ memory {
+ reg = <0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
+ };
+ };
+
+ i2c0: i2c@ff650000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "okay";
+ };
+
+ watchdog@ff800000 {
+ status = "okay";
+ };
+
+ serial@ff180000 {
+ status = "okay";
+ };
+
+ serial@ff190000 {
+ status = "okay";
+ };
+
+ serial@ff690000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "okay";
+ };
+
+ serial@ff1b0000 {
+ status = "okay";
+ };
+
+ serial@ff1c0000 {
+ status = "okay";
+ };
+
+ pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+ };
+};
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-07-18 0:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 0:18 [PATCH v2 0/7] ARM: rockchip: add initial support for rk3288 Heiko Stübner
2014-07-18 0:19 ` [PATCH v2 1/7] dt-bindings: arm: add cortex-a12 and cortex-a17 cpu compatible properties Heiko Stübner
2014-07-18 0:19 ` [PATCH v2 2/7] ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options Heiko Stübner
2014-07-25 3:49 ` Doug Anderson
2014-07-18 0:20 ` [PATCH v2 3/7] ARM: rockchip: add debug uart used by rk3288 Heiko Stübner
2014-07-18 0:20 ` [PATCH v2 4/7] ARM: Kconfig: set default gpio number for rockchip SoCs Heiko Stübner
2014-07-18 0:21 ` [PATCH v2 5/7] ARM: rockchip: enable support for RK3288 SoCs Heiko Stübner
2014-07-25 3:50 ` Doug Anderson
2014-07-18 0:21 ` [PATCH v2 6/7] ARM: dts: rockchip: add core rk3288 dtsi Heiko Stübner
2014-07-18 9:35 ` Mark Rutland
2014-07-18 9:49 ` Heiko Stübner
2014-07-24 23:06 ` Doug Anderson
[not found] ` <CAD=FV=X9Ym_1-mweR2fBNwPhfbMVUu+EKO+qsY=te+=-pUDhcw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-25 19:39 ` Mike Turquette
2014-07-25 19:45 ` Heiko Stübner
2014-07-18 0:21 ` Heiko Stübner [this message]
2014-07-24 23:17 ` [PATCH v2 7/7] ARM: dts: add rk3288 evaluation board Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2004020.THrDyKm3fa@diego \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eddie.cai-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).