Re: [PATCH net-next v3 2/3] can: mscan-mpc5xxx: add support for the MPC512x processor

[Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

[-- Attachment #1.1: Type: text/plain, Size: 1308 bytes --]

On Thu, Jan 07, 2010 at 03:10:20PM +0100, Wolfgang Grandegger wrote:
> From: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>
> 
> The main differences compared to the MSCAN on the MPC5200 are:
> 
> - More flexibility in choosing the CAN source clock and frequency:
> 
>   Three different clock sources can be selected: "ip", "ref" or "sys".
>   For the latter two, a clock divider can be defined as well. If the
>   clock source is not specified by the device tree, we first try to
>   find an optimal CAN source clock based on the system clock. If that
>   is not possible, the reference clock will be used.
> 
> - The behavior of bus-off recovery is configurable:
> 
>   To comply with the usual handling of Socket-CAN bus-off recovery,
>   "recovery on request" is selected (instead of automatic recovery).
> 
> Note that only MPC5121 Rev. 2 and later is supported.
> 
> Signed-off-by: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>

Reviewed-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

It still works with our board and I didn't find anything else to comment on.

Thanks, Wolfgang!

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core