From: Dezhong Diao <dediao-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
glikely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
dvomlehn-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org
Subject: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
Date: Tue, 27 Jul 2010 17:49:48 -0400 [thread overview]
Message-ID: <20100727214948.GA29241@dediao-lnx2.corp.sa.net> (raw)
V2:
Synchronize with test-devicetree branch of device tree.
V1:
Add common code to support device tree on MIPS.
Signed-off-by: Dezhong Diao <dediao-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
---
arch/mips/Kconfig | 13 ++++
arch/mips/include/asm/prom.h | 61 ++++++++++++++++
arch/mips/kernel/Makefile | 2 +
arch/mips/kernel/prom.c | 158 ++++++++++++++++++++++++++++++++++++++++++
arch/mips/kernel/setup.c | 2 +
5 files changed, 236 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/prom.h
create mode 100644 arch/mips/kernel/prom.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index cdaae94..d85e8fb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2083,6 +2083,19 @@ config SECCOMP
If unsure, say Y. Only embedded should say N here.
+config USE_OF
+ bool "Flattened Device Tree support"
+ select OF
+ select OF_FLATTREE
+ help
+ Include support for flattened device tree machine descriptions.
+
+config ARCH_HAS_DEVTREE_MEM
+ bool "Support user-defined memory scan function in device tree"
+ depends on OF
+ help
+ The user has a customized function to parse memory nodes.
+
endmenu
config LOCKDEP_SUPPORT
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
new file mode 100644
index 0000000..b798b19
--- /dev/null
+++ b/arch/mips/include/asm/prom.h
@@ -0,0 +1,61 @@
+/*
+ * arch/mips/include/asm/prom.h
+ *
+ * Copyright (C) 2010 Cisco Systems Inc. <dediao-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MIPS_PROM_H
+#define __ASM_MIPS_PROM_H
+
+#ifdef CONFIG_OF
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/bootinfo.h>
+
+/* which is compatible with the flattened device tree (FDT) */
+#define cmd_line arcs_cmdline
+
+/*
+ * Use this value to indicate lack of interrupt
+ * capability
+ */
+#ifndef NO_IRQ
+#define NO_IRQ ((unsigned int)(-1))
+#endif
+
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ return (unsigned long)-1;
+}
+
+struct device_node;
+
+static inline int of_node_to_nid(struct device_node *device)
+{
+ return 0;
+}
+
+static inline void __init early_init_dt_scan_chosen_arch(unsigned long node)
+{
+}
+
+extern int __init early_init_dt_scan_memory_arch(unsigned long node,
+ const char *uname, int depth, void *data);
+
+extern int __init reserve_mem_mach(unsigned long addr, unsigned long size);
+extern void __init free_mem_mach(unsigned long addr, unsigned long size);
+
+extern void __init device_tree_init(void);
+#else /* CONFIG_OF */
+static inline void __init device_tree_init(void)
+{
+}
+#endif /* CONFIG_OF */
+
+#endif /* _ASM_MIPS_PROM_H */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 7a6ac50..4d4ceb1 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -95,6 +95,8 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
+obj-$(CONFIG_OF) += prom.o
+
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
new file mode 100644
index 0000000..fb4adc2
--- /dev/null
+++ b/arch/mips/kernel/prom.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/mips/kernel/prom.c
+ *
+ * Copyright (C) 2010 Cisco Systems Inc. <dediao-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+#include <linux/initrd.h>
+#include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/page.h>
+#include <asm/prom.h>
+
+/*
+ * The list of OF IDs below is used for matching bus types in the
+ * system whose devices are to be exposed as of_platform_devices.
+ *
+ * This is the default list valid for most platforms. This file provides
+ * functions who can take an explicit list if necessary though
+ *
+ * The search is always performed recursively looking for children of
+ * the provided device_node and recursively if such a children matches
+ * a bus type in the list
+ */
+const struct of_device_id of_default_bus_ids[] = {
+ {},
+};
+
+#ifndef CONFIG_ARCH_HAS_DEVTREE_MEM
+int __init early_init_dt_scan_memory_arch(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ return early_init_dt_scan_memory(node, uname, depth, data);
+}
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+ return add_memory_region(base, size, BOOT_MEM_RAM);
+}
+
+int __init reserve_mem_mach(unsigned long addr, unsigned long size)
+{
+ return reserve_bootmem(addr, size, BOOTMEM_DEFAULT);
+}
+
+void __init free_mem_mach(unsigned long addr, unsigned long size)
+{
+ return free_bootmem(addr, size);
+}
+#endif
+
+u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+ return virt_to_phys(
+ __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS))
+ );
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
+{
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(end);
+ initrd_below_start_ok = 1;
+}
+#endif
+
+/*
+ * Interrupt remapper
+ */
+struct device_node *of_irq_find_parent_by_phandle(phandle p)
+{
+ return of_find_node_by_phandle(p);
+}
+
+/*
+ * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq#
+ *
+ * Currently the mapping mechanism is trivial; simple flat hwirq numbers are
+ * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not
+ * supported.
+ */
+unsigned int irq_create_of_mapping(struct device_node *controller,
+ const u32 *intspec, unsigned int intsize)
+{
+ return intspec[0];
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
+
+void __init early_init_devtree(void *params)
+{
+ /* Setup flat device-tree pointer */
+ initial_boot_params = params;
+
+ /* Retrieve various informations from the /chosen node of the
+ * device-tree, including the platform type, initrd location and
+ * size, and more ...
+ */
+ of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+
+ /* Scan memory nodes */
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
+}
+
+void __init device_tree_init(void)
+{
+ unsigned long base, size;
+
+ if (!initial_boot_params)
+ return;
+
+ base = virt_to_phys((void *)initial_boot_params);
+ size = initial_boot_params->totalsize;
+
+ /* Before we do anything, lets reserve the dt blob */
+ reserve_mem_mach(base, size);
+
+ unflatten_device_tree();
+
+ /* free the space reserved for the dt blob */
+ free_mem_mach(base, size);
+}
+
+#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
+static struct dentry *of_debugfs_root;
+static struct debugfs_blob_wrapper flat_dt_blob;
+
+static int __init export_flat_device_tree(void)
+{
+ struct dentry *d;
+
+ flat_dt_blob.data = initial_boot_params;
+ flat_dt_blob.size = initial_boot_params->totalsize;
+
+ d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
+ of_debugfs_root, &flat_dt_blob);
+ if (!d)
+ return 1;
+
+ return 0;
+}
+device_initcall(export_flat_device_tree);
+#endif
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 85aef3f..a6b900f 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -31,6 +31,7 @@
#include <asm/setup.h>
#include <asm/smp-ops.h>
#include <asm/system.h>
+#include <asm/prom.h>
struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
@@ -487,6 +488,7 @@ static void __init arch_mem_init(char **cmdline_p)
}
bootmem_init();
+ device_tree_init();
sparse_init();
paging_init();
}
--
1.6.0.6
next reply other threads:[~2010-07-27 21:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-27 21:49 Dezhong Diao [this message]
[not found] ` <20100727214948.GA29241-xfMjgo8mR/VtOC46+g3osbQa8qPdvLwY@public.gmane.org>
2010-07-28 18:54 ` [PATCH v2 1/2] MIPS: Add device tree support to MIPS Grant Likely
2010-07-28 19:19 ` David Daney
[not found] ` <4C5082BE.5050203-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
2010-07-28 19:25 ` Grant Likely
2010-07-28 20:47 ` Dezhong Diao (dediao)
[not found] ` <7A9214B0DEB2074FBCA688B30B04400D013FA46D-2KNrN6/GZtCQwNoRDPPJJaBKnGwkPULj@public.gmane.org>
2010-07-29 19:40 ` Grant Likely
2010-08-16 20:42 ` Grant Likely
[not found] ` <20100816204211.GA17571-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-08-17 3:40 ` Stephen Rothwell
[not found] ` <20100817134039.fc1108c7.sfr-3FnU+UHB4dNDw9hX6IcOSA@public.gmane.org>
2010-08-18 14:39 ` Ralf Baechle
[not found] ` <20100818143926.GB2849-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
2010-08-18 15:18 ` Stephen Rothwell
[not found] ` <20100819011856.bfef5f65.sfr-3FnU+UHB4dNDw9hX6IcOSA@public.gmane.org>
2010-08-18 15:36 ` Ralf Baechle
2010-07-28 21:33 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100727214948.GA29241@dediao-lnx2.corp.sa.net \
--to=dediao-fyb4gu1cfyuavxtiumwx3w@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=dvomlehn-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
--cc=glikely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox