From: Marcin Slusarz <marcin.slusarz@gmail.com>
To: Dan Carpenter <error27@gmail.com>
Cc: nouveau@lists.freedesktop.org,
devicetree-discuss@lists.ozlabs.org,
kernel-janitors@vger.kernel.org, dri-devel@lists.freedesktop.org,
Grant Likely <grant.likely@secretlab.ca>,
Ben Skeggs <bskeggs@redhat.com>, Dave Airlie <airlied@redhat.com>
Subject: Re: [patch v2] nouveau: unwind on load errors
Date: Fri, 30 Jul 2010 22:20:00 +0200 [thread overview]
Message-ID: <20100730202000.GA4194@joi.lan> (raw)
In-Reply-To: <20100730150432.GC26313@bicker>
On Fri, Jul 30, 2010 at 05:04:32PM +0200, Dan Carpenter wrote:
> nuveau_load() just returned directly if there was an error instead of
^^^^^^ typo
> releasing resources.
>
> Signed-off-by: Dan Carpenter <error27@gmail.com>
> ---
> V2: updated to the nouveau git tree.
Thanks.
Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com>
> diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
> index ee3729e..cf16bfb 100644
> --- a/drivers/gpu/drm/nouveau/nouveau_state.c
> +++ b/drivers/gpu/drm/nouveau/nouveau_state.c
> @@ -739,8 +739,10 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
> int ret;
>
> dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
> - if (!dev_priv)
> - return -ENOMEM;
> + if (!dev_priv) {
> + ret = -ENOMEM;
> + goto err_out;
> + }
> dev->dev_private = dev_priv;
> dev_priv->dev = dev;
>
> @@ -750,8 +752,10 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
> dev->pci_vendor, dev->pci_device, dev->pdev->class);
>
> dev_priv->wq = create_workqueue("nouveau");
> - if (!dev_priv->wq)
> - return -EINVAL;
> + if (!dev_priv->wq) {
> + ret = -EINVAL;
> + goto err_priv;
> + }
>
> /* resource 0 is mmio regs */
> /* resource 1 is linear FB */
> @@ -764,7 +768,8 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
> if (!dev_priv->mmio) {
> NV_ERROR(dev, "Unable to initialize the mmio mapping. "
> "Please report your setup to " DRIVER_EMAIL "\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto err_wq;
> }
> NV_DEBUG(dev, "regs mapped ok at 0x%llx\n",
> (unsigned long long)mmio_start_offs);
> @@ -812,7 +817,8 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
> break;
> default:
> NV_INFO(dev, "Unsupported chipset 0x%08x\n", reg0);
> - return -EINVAL;
> + ret = -EINVAL;
> + goto err_mmio;
> }
>
> NV_INFO(dev, "Detected an NV%2x generation card (0x%08x)\n",
> @@ -820,7 +826,7 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
>
> ret = nouveau_remove_conflicting_drivers(dev);
> if (ret)
> - return ret;
> + goto err_mmio;
>
> /* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
> if (dev_priv->card_type >= NV_40) {
> @@ -834,7 +840,8 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
> dev_priv->ramin_size);
> if (!dev_priv->ramin) {
> NV_ERROR(dev, "Failed to PRAMIN BAR");
> - return -ENOMEM;
> + ret = -ENOMEM;
> + goto err_mmio;
> }
> } else {
> dev_priv->ramin_size = 1 * 1024 * 1024;
> @@ -842,7 +849,8 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
> dev_priv->ramin_size);
> if (!dev_priv->ramin) {
> NV_ERROR(dev, "Failed to map BAR0 PRAMIN.\n");
> - return -ENOMEM;
> + ret = -ENOMEM;
> + goto err_mmio;
> }
> }
>
> @@ -857,9 +865,21 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
> /* For kernel modesetting, init card now and bring up fbcon */
> ret = nouveau_card_init(dev);
> if (ret)
> - return ret;
> + goto err_ramin;
>
> return 0;
> +
> +err_ramin:
> + iounmap(dev_priv->ramin);
> +err_mmio:
> + iounmap(dev_priv->mmio);
> +err_wq:
> + destroy_workqueue(dev_priv->wq);
> +err_priv:
> + kfree(dev_priv);
> + dev->dev_private = NULL;
> +err_out:
> + return ret;
> }
>
> void nouveau_lastclose(struct drm_device *dev)
next prev parent reply other threads:[~2010-07-30 20:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-29 18:02 [patch] nouveau: unwind on load errors Dan Carpenter
2010-07-29 19:39 ` Marcin Slusarz
[not found] ` <20100729193948.GA4821-OI9uyE9O0yo@public.gmane.org>
2010-07-30 15:04 ` [patch v2] " Dan Carpenter
2010-07-30 20:20 ` Marcin Slusarz [this message]
2010-08-05 0:27 ` Francisco Jerez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100730202000.GA4194@joi.lan \
--to=marcin.slusarz@gmail.com \
--cc=airlied@redhat.com \
--cc=bskeggs@redhat.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=error27@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=kernel-janitors@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox