Devicetree
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: "André Schwarz" <andre.schwarz-P0pTl12WyEgpBod+wgzj8A@public.gmane.org>
Cc: LinuxPPC List
	<linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>,
	DevTreeDiscuss
	<devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
Subject: Re: How to define an I2C-to-SPI bridge device ?
Date: Thu, 9 Sep 2010 11:06:46 -0600	[thread overview]
Message-ID: <20100909170646.GD6273@angua.secretlab.ca> (raw)
In-Reply-To: <1283502979.17812.22.camel@swa-m460>

On Fri, Sep 03, 2010 at 10:36:19AM +0200, André Schwarz wrote:
> Hi,
> 
> we're about to get new MPC8377 based hardware with various peripherals.
> There are two I2C-to-SPI bridge devices (NXP SC18IS602) and I'm not sure
> how to define a proper dts...
> 
> Of course it's an easy thing creating 2 child nodes on the CPU's I2C
> device - but how can I represent the created SPI bus ?
> 
> Is the (possibly) required driver (of_sc18is60x_spi ?) supposed to be an
> I2C slave or an SPI host driver ?

Both!  The driver would get probed from the i2c bus, and it would
create and register an spi master.  If the spi bus registration
includes a pointer to the device tree node, then the child nodes will
automatically be registered as spi_devices.

The dts is also fairly straight forward:

i2c-bus: i2c@80001000 {
	compatible = <blah>;
	#address-cells = <1>;
	#size-cells = <0>;

	spi-bus: spi@28{
		compatible = "nxp,sc18is602";
		#address-cells = <1>;
		#size-cells = <0x28>;
		reg = <0>;

		spi-device@0 {
			compatible = <blah>;
			reg = <0>;
		};
		spi-device@1 {
			compatible = <blah>;
			reg = <1>;
		};
		spi-device@2 {
			compatible = <blah>;
			reg = <2>;
		};
	};
};

Cheers,
g.

> 
> 
> Any help is welcome.
> 
> 
> -- 
> Mit freundlichen Grüßen / Best regards
> 
> André Schwarz
> 
> ___________________________________________
> 
> MATRIX VISION GmbH
> - Entwicklung / Development -
> Talstraße 16
> D-71570 Oppenweiler
> 
> Fon: ++49-07191-9432-420
> Fax: ++49-07191-9432-288
> eMail: andre.schwarz-P0pTl12WyEgpBod+wgzj8A@public.gmane.org
> web: www.matrix-vision.de
> 
> 
> MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
> Registergericht: Amtsgericht Stuttgart, HRB 271090
> Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim Reich
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev

      parent reply	other threads:[~2010-09-09 17:06 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-03  8:36 How to define an I2C-to-SPI bridge device ? André Schwarz
2010-09-03 12:08 ` Anton Vorontsov
2010-09-06 11:40   ` Andre Schwarz
     [not found]     ` <4C84D334.6060008-P0pTl12WyEgpBod+wgzj8A@public.gmane.org>
2010-09-06 14:37       ` André Schwarz
2010-09-09 18:23     ` Grant Likely
2010-09-10  8:11       ` André Schwarz
2010-09-10 17:37         ` Grant Likely
     [not found]           ` <20100910173706.GD11284-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-09-10 18:14             ` André Schwarz
2010-09-10 18:27               ` Anton Vorontsov
2010-09-10 18:28               ` Grant Likely
     [not found]                 ` <20100910182815.GH11284-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-09-12 15:10                   ` André Schwarz
2010-09-13  4:39                     ` Grant Likely
2010-09-09 17:06 ` Grant Likely [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100909170646.GD6273@angua.secretlab.ca \
    --to=grant.likely-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
    --cc=andre.schwarz-P0pTl12WyEgpBod+wgzj8A@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox