From: John Bonesio <bones-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
David Gibson
<david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCH 1/4] Create new and use new print_error that uses printf style formatting.
Date: Wed, 20 Oct 2010 14:44:58 -0700 [thread overview]
Message-ID: <20101020214457.2985.90434.stgit@riker> (raw)
In-Reply-To: <20101020214419.2985.51068.stgit@riker>
yyerror is meant to be called by the parser internal code, and it's interface
is limited. Instead create and call a new error message routine that allows
formatted strings to be used.
yyerror uses the new routine so error formatting remains consistent.
Signed-of-by: John Bonesio <bones-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
dtc-parser.y | 28 ++++++++++++++++++----------
srcpos.c | 21 +++++++++++++--------
srcpos.h | 2 ++
3 files changed, 33 insertions(+), 18 deletions(-)
diff --git a/dtc-parser.y b/dtc-parser.y
index 0aaf8e8..b58ba8e 100644
--- a/dtc-parser.y
+++ b/dtc-parser.y
@@ -27,6 +27,7 @@
YYLTYPE yylloc;
extern int yylex(void);
+extern void print_error(char const *fmt, ...);
extern void yyerror(char const *s);
extern struct boot_info *the_boot_info;
@@ -136,8 +137,7 @@ devicetree:
if (target)
merge_nodes(target, $3);
else
- yyerror("label does not exist in "
- " node redefinition");
+ print_error("label, '%s' not found", $2);
$$ = $1;
}
;
@@ -200,8 +200,7 @@ propdata:
if ($6 != 0)
if (fseek(f, $6, SEEK_SET) != 0)
- srcpos_error(&yylloc,
- "Couldn't seek to offset %llu in \"%s\": %s",
+ print_error("Couldn't seek to offset %llu in \"%s\": %s",
(unsigned long long)$6,
$4.val,
strerror(errno));
@@ -295,7 +294,7 @@ subnodes:
}
| subnode propdef
{
- yyerror("syntax error: properties must precede subnodes");
+ print_error("syntax error: properties must precede subnodes");
YYERROR;
}
;
@@ -314,12 +313,21 @@ subnode:
%%
-void yyerror(char const *s)
+void print_error(char const *fmt, ...)
{
- srcpos_error(&yylloc, "%s", s);
+ va_list va;
+
+ va_start(va, fmt);
+ srcpos_verror(&yylloc, fmt, va);
+ va_end(va);
+
treesource_error = 1;
}
+void yyerror(char const *s) {
+ print_error("%s", s);
+}
+
static unsigned long long eval_literal(const char *s, int base, int bits)
{
unsigned long long val;
@@ -328,11 +336,11 @@ static unsigned long long eval_literal(const char *s, int base, int bits)
errno = 0;
val = strtoull(s, &e, base);
if (*e)
- yyerror("bad characters in literal");
+ print_error("bad characters in literal");
else if ((errno == ERANGE)
|| ((bits < 64) && (val >= (1ULL << bits))))
- yyerror("literal out of range");
+ print_error("literal out of range");
else if (errno != 0)
- yyerror("bad literal");
+ print_error("bad literal");
return val;
}
diff --git a/srcpos.c b/srcpos.c
index 87d7f17..2dbc874 100644
--- a/srcpos.c
+++ b/srcpos.c
@@ -208,20 +208,25 @@ srcpos_string(struct srcpos *pos)
return pos_str;
}
+void
+srcpos_verror(struct srcpos *pos, char const *fmt, va_list va)
+{
+ const char *srcstr;
+
+ srcstr = srcpos_string(pos);
+
+ fprintf(stdout, "Error: %s ", srcstr);
+ vfprintf(stdout, fmt, va);
+ fprintf(stdout, "\n");
+}
void
srcpos_error(struct srcpos *pos, char const *fmt, ...)
{
- const char *srcstr;
va_list va;
- va_start(va, fmt);
-
- srcstr = srcpos_string(pos);
-
- fprintf(stderr, "Error: %s ", srcstr);
- vfprintf(stderr, fmt, va);
- fprintf(stderr, "\n");
+ va_start(va, fmt);
+ srcpos_verror(pos, fmt, va);
va_end(va);
}
diff --git a/srcpos.h b/srcpos.h
index 985f847..bd7966e 100644
--- a/srcpos.h
+++ b/srcpos.h
@@ -76,6 +76,8 @@ extern struct srcpos *srcpos_copy(struct srcpos *pos);
extern char *srcpos_string(struct srcpos *pos);
extern void srcpos_dump(struct srcpos *pos);
+extern void srcpos_verror(struct srcpos *pos, char const *, va_list va)
+ __attribute__((format(printf, 2, 0)));
extern void srcpos_error(struct srcpos *pos, char const *, ...)
__attribute__((format(printf, 2, 3)));
extern void srcpos_warn(struct srcpos *pos, char const *, ...)
next prev parent reply other threads:[~2010-10-20 21:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-20 21:44 [PATCH 0/4] Series short description John Bonesio
2010-10-20 21:44 ` John Bonesio [this message]
2010-10-21 4:44 ` [PATCH 1/4] Create new and use new print_error that uses printf style formatting Grant Likely
[not found] ` <20101021044410.GD13335-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-11-13 20:40 ` Jon Loeliger
2010-10-20 21:45 ` [PATCH 2/4] Implements new features for updating existing device tree nodes John Bonesio
2010-10-21 4:47 ` Grant Likely
2010-10-21 5:58 ` David Gibson
2010-10-20 21:45 ` [PATCH 3/4] Allow nodes at the root to be specified by path as well as by label John Bonesio
2010-10-21 4:36 ` Grant Likely
2010-10-21 6:03 ` David Gibson
2010-10-20 21:45 ` [PATCH 4/4] Create a new property value that means 'undefined' John Bonesio
2010-10-21 5:20 ` Grant Likely
[not found] ` <20101021052053.GF13335-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-10-21 6:19 ` David Gibson
2010-10-21 15:20 ` John Bonesio
2010-10-22 0:38 ` David Gibson
2010-10-22 19:42 ` John Bonesio
2010-10-21 6:14 ` David Gibson
2010-10-22 19:50 ` John Bonesio
2010-10-25 0:44 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101020214457.2985.90434.stgit@riker \
--to=bones-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
--cc=david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox