From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tobias Klauser Subject: Re: [PATCH v3] Add devicetree support to altera_jtaguart Date: Mon, 24 Jan 2011 13:28:56 +0100 Message-ID: <20110124132856.3dc1a688@fermion> References: <4D2E287B.7000005@home.nl> <20110112230607.GA31712@angua.secretlab.ca> <4D2E52FF.5060102@home.nl> <20110118173557.48407296@fermion> <4D3C2A67.6030408@home.nl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4D3C2A67.6030408-CmkmPbn3yAE@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org To: Walter Goossens Cc: nios2-dev-1eJk0qcHJCcaeqlQEoCUNoJY59XmG8rH@public.gmane.org, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org List-Id: devicetree@vger.kernel.org Hi On Sun, 23 Jan 2011 14:17:27 +0100 Walter Goossens wrote: > New version of devicetree patch for altera jtag uart. > Fixed comments in v2 and added version nr as discussed in the altera_ps2 > patch. Did you send the patch to linux-serial yet? The driver is in mainline and changes should flow there as soon as possible too, I think. While looking at the patch I noticed that we might want to switch the driver to having one platform device per port (and thus eliminating the need for the for loop. Anton Vorontsov submitted a patch to do that for the altera_uart driver a while ago and it was integrated since. If you are OK with this, I will change the altera_jtaguart driver in that way too and submit the change (and also Walter's devicetree patch) to mainline. Thanks Tobias