From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grant Likely Subject: Re: [PATCH 1/4] ARM: DT: Add SMDKV310 machine with device tree support. Date: Sun, 6 Feb 2011 23:41:47 -0700 Message-ID: <20110207064147.GB24685@angua.secretlab.ca> References: <1296998250-21856-1-git-send-email-thomas.abraham@linaro.org> <1296998250-21856-2-git-send-email-thomas.abraham@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <1296998250-21856-2-git-send-email-thomas.abraham-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linaro-dev-bounces-cunTk1MwBs8s++Sfvej+rw@public.gmane.org Errors-To: linaro-dev-bounces-cunTk1MwBs8s++Sfvej+rw@public.gmane.org To: Thomas Abraham Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org List-Id: devicetree@vger.kernel.org On Sun, Feb 06, 2011 at 06:47:27PM +0530, Thomas Abraham wrote: > This patch adds a new SMDKV310 machine that boots with a minimal > device tree support. The bootargs and memory information is obtained > from the device tree during boot. > > Signed-off-by: Thomas Abraham > --- > arch/arm/mach-s5pv310/Kconfig | 7 ++ > arch/arm/mach-s5pv310/Makefile | 1 + > arch/arm/mach-s5pv310/mach-smdkv310-dt.c | 101 ++++++++++++++++++++++++++++++ > 3 files changed, 109 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-s5pv310/mach-smdkv310-dt.c > > diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig > index 09c4c21..6c5f0bf 100644 > --- a/arch/arm/mach-s5pv310/Kconfig > +++ b/arch/arm/mach-s5pv310/Kconfig > @@ -127,6 +127,13 @@ config MACH_SMDKV310 > help > Machine support for Samsung SMDKV310 > > +config MACH_SMDKV310_DT > + bool "SMDKV310 with device tree support" SMDKV310 is the board designation, not the SoC, correct? Considering that the point of this is to allow a single machine description to support many boards, you should consider naming this MACH_S5PV310_DT. Otherwise, you may as well just add a dt_compat table to the existing mach-smdkv310.c board support file. > + select CPU_S5PV310 > + select USE_OF > + help > + Machine support for Samsung SMDKV310 with device tree based initialization. > + > endmenu > > comment "Configuration for HSMMC bus width" > diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile > index 036fb38..59545aa 100644 > --- a/arch/arm/mach-s5pv310/Makefile > +++ b/arch/arm/mach-s5pv310/Makefile > @@ -24,6 +24,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o > > obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o > obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o > +obj-$(CONFIG_MACH_SMDKV310_DT) += mach-smdkv310-dt.o > obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o > > # device support > diff --git a/arch/arm/mach-s5pv310/mach-smdkv310-dt.c b/arch/arm/mach-s5pv310/mach-smdkv310-dt.c > new file mode 100644 > index 0000000..367fdb1 > --- /dev/null > +++ b/arch/arm/mach-s5pv310/mach-smdkv310-dt.c > @@ -0,0 +1,101 @@ > +/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c > + * > + * Copyright (c) 2010 Samsung Electronics Co., Ltd. > + * http://www.samsung.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > + > +#include > +#include > +#include > +#include > + > +#include > + > +/* Following are default values for UCON, ULCON and UFCON UART registers */ > +#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ > + S3C2410_UCON_RXILEVEL | \ > + S3C2410_UCON_TXIRQMODE | \ > + S3C2410_UCON_RXIRQMODE | \ > + S3C2410_UCON_RXFIFO_TOI | \ > + S3C2443_UCON_RXERR_IRQEN) > + > +#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8 > + > +#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ > + S5PV210_UFCON_TXTRIG4 | \ > + S5PV210_UFCON_RXTRIG4) > + > +static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { > + [0] = { > + .hwport = 0, > + .flags = 0, '0' initial values don't need to be specified. .flags could be dropped from each of these entries. > + .ucon = SMDKV310_UCON_DEFAULT, > + .ulcon = SMDKV310_ULCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > + [1] = { > + .hwport = 1, > + .flags = 0, > + .ucon = SMDKV310_UCON_DEFAULT, > + .ulcon = SMDKV310_ULCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > + [2] = { > + .hwport = 2, > + .flags = 0, > + .ucon = SMDKV310_UCON_DEFAULT, > + .ulcon = SMDKV310_ULCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > + [3] = { > + .hwport = 3, > + .flags = 0, > + .ucon = SMDKV310_UCON_DEFAULT, > + .ulcon = SMDKV310_ULCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > +}; > + > +static struct platform_device *smdkv310_devices[] __initdata = { > +}; Since this list is empty, it can be removed, and so can the call to platform_add_devices() below. > + > +static void __init smdkv310_map_io(void) > +{ > + s5p_init_io(NULL, 0, S5P_VA_CHIPID); > + s3c24xx_init_clocks(24000000); > + s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); > +} > + > +static void __init smdkv310_machine_init(void) > +{ > + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); > +} > + > +static char const *smdkv310_dt_compat[] = { > + "samsung,smdkv310", > + NULL > +}; > + > +DT_MACHINE_START(SMDKV310, "Samsung's SMDKV310 with flattened device tree") > + /* Maintainer: Kukjin Kim */ > + /* Maintainer: Changhwan Youn */ > + .boot_params = S5P_PA_SDRAM + 0x100, .boot_params can be dropped. > + .init_irq = s5pv310_init_irq, > + .map_io = smdkv310_map_io, > + .init_machine = smdkv310_machine_init, > + .timer = &s5pv310_timer, > + .dt_compat = smdkv310_dt_compat, > +MACHINE_END > -- > 1.6.6.rc2 > > > _______________________________________________ > linaro-dev mailing list > linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org > http://lists.linaro.org/mailman/listinfo/linaro-dev