Re: [PATCH V2 2/3] arm/dt: add very basic dts file for babbage board

[Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>]

Aha, Jason.  Grant and I put many comments on v1 of this patch, but it
seems that v2 is identical to v1, except adding Rob Herring sign-off.

On Mon, Mar 07, 2011 at 09:05:59PM +0800, Jason Liu wrote:
> Signed-off-by: Jason Liu <r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Singed-off-by: Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  arch/arm/boot/dts/babbage.dts |  110 +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 110 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/babbage.dts b/arch/arm/boot/dts/babbage.dts
> new file mode 100644
> index 0000000..46a3071
> --- /dev/null
> +++ b/arch/arm/boot/dts/babbage.dts
> @@ -0,0 +1,110 @@
> +/dts-v1/;
> +
> +/ {
> +	model = "Freescale i.MX51 Babbage";
> +	compatible = "fsl,mx51-babbage";
> +	#address-cells = <0x1>;
> +	#size-cells = <0x1>;
> +	#interrupt-cells = <0x1>;
> +	interrupt-parent = <&tzic>;
> +
> +	memory {
> +		reg = <0x90000000 0x20000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttymxc1,115200n8 debug earlyprintk";
> +	};
> +
> +	soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		tzic: tzic@0 {
> +			#address-cells = <0>;
> +			#interrupt-cells = <1>;
> +			interrupt-controller;
> +			reg = <0xe0000000 0x1000>;
> +			compatible = "fsl,imx51-tzic";
> +		};
> +	};
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		uart0_clk: uart@0 {
> +			compatible = "clock";
> +			clock-outputs = "imx-uart.0";
> +		};
> +
> +		uart1_clk: uart@1 {
> +			compatible = "clock";
> +			clock-outputs = "imx-uart.1";
> +		};
> +
> +		uart2_clk: uart@2 {
> +			compatible = "clock";
> +			clock-outputs = "imx-uart.2";
> +		};
> +
> +		fec_clk: fec@0 {
> +			compatible = "clock";
> +			clock-outputs = "fec.0";
> +		};
> +	};
> +
> +	spba@70000000 {
> +		#address-cells = <0x1>;
> +		#size-cells = <0x1>;
> +		compatible = "simple-bus";
> +		ranges = <0x0 0x70000000 0x100000>;
> +
> +		imx-uart@c000 {
> +			compatible = "imx-uart";
> +			reg = <0xc000 0x1000>;
> +			interrupts = <0x21>;
> +			rts-cts;
> +			uart-clock = <&uart2_clk>, "uart";
> +		};
> +	};
> +
> +	aips@73f00000 {
> +		#address-cells = <0x1>;
> +		#size-cells = <0x1>;
> +		compatible = "simple-bus";
> +		ranges = <0x0 0x73f00000 0x100000>;
> +
> +		imx-uart@bc000 {
> +			compatible = "imx-uart";
> +			reg = <0xbc000 0x1000>;
> +			interrupts = <0x1f>;
> +			rts-cts;
> +			uart-clock = <&uart0_clk>, "uart";
> +		};
> +
> +		imx-uart@c0000 {
> +			compatible = "imx-uart";
> +			reg = <0xc0000 0x1000>;
> +			interrupts = <0x20>;
> +			rts-cts;
> +			uart-clock = <&uart1_clk>, "uart";
> +		};
> +	};
> +
> +	aips@83f00000 {
> +		#address-cells = <0x1>;
> +		#size-cells = <0x1>;
> +		compatible = "simple-bus";
> +		ranges = <0x0 0x83f00000 0x100000>;
> +
> +		fec@ec000 {
> +			compatible = "fec";
> +			reg = <0xec000 0x1000>;
> +			interrupts = <0x57>;
> +			fec_clk-clock = <&fec_clk>, "fec";
> +		};
> +	};
> +};
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> linaro-dev mailing list
> linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
> 

-- 
Regards,
Shawn