From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH V2 2/3] arm/dt: add very basic dts file for babbage board Date: Mon, 7 Mar 2011 22:51:38 +0800 Message-ID: <20110307145136.GC9978@S2101-09.ap.freescale.net> References: <1299503160-9910-1-git-send-email-jason.hui@linaro.org> <1299503160-9910-3-git-send-email-jason.hui@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <1299503160-9910-3-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linaro-dev-bounces-cunTk1MwBs8s++Sfvej+rw@public.gmane.org Errors-To: linaro-dev-bounces-cunTk1MwBs8s++Sfvej+rw@public.gmane.org To: Jason Liu Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org List-Id: devicetree@vger.kernel.org Aha, Jason. Grant and I put many comments on v1 of this patch, but it seems that v2 is identical to v1, except adding Rob Herring sign-off. On Mon, Mar 07, 2011 at 09:05:59PM +0800, Jason Liu wrote: > Signed-off-by: Jason Liu > Singed-off-by: Rob Herring > --- > arch/arm/boot/dts/babbage.dts | 110 +++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 110 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/babbage.dts b/arch/arm/boot/dts/babbage.dts > new file mode 100644 > index 0000000..46a3071 > --- /dev/null > +++ b/arch/arm/boot/dts/babbage.dts > @@ -0,0 +1,110 @@ > +/dts-v1/; > + > +/ { > + model = "Freescale i.MX51 Babbage"; > + compatible = "fsl,mx51-babbage"; > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + #interrupt-cells = <0x1>; > + interrupt-parent = <&tzic>; > + > + memory { > + reg = <0x90000000 0x20000000>; > + }; > + > + chosen { > + bootargs = "console=ttymxc1,115200n8 debug earlyprintk"; > + }; > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + ranges; > + > + tzic: tzic@0 { > + #address-cells = <0>; > + #interrupt-cells = <1>; > + interrupt-controller; > + reg = <0xe0000000 0x1000>; > + compatible = "fsl,imx51-tzic"; > + }; > + }; > + > + clocks { > + #address-cells = <1>; > + #size-cells = <0>; > + > + uart0_clk: uart@0 { > + compatible = "clock"; > + clock-outputs = "imx-uart.0"; > + }; > + > + uart1_clk: uart@1 { > + compatible = "clock"; > + clock-outputs = "imx-uart.1"; > + }; > + > + uart2_clk: uart@2 { > + compatible = "clock"; > + clock-outputs = "imx-uart.2"; > + }; > + > + fec_clk: fec@0 { > + compatible = "clock"; > + clock-outputs = "fec.0"; > + }; > + }; > + > + spba@70000000 { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + compatible = "simple-bus"; > + ranges = <0x0 0x70000000 0x100000>; > + > + imx-uart@c000 { > + compatible = "imx-uart"; > + reg = <0xc000 0x1000>; > + interrupts = <0x21>; > + rts-cts; > + uart-clock = <&uart2_clk>, "uart"; > + }; > + }; > + > + aips@73f00000 { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + compatible = "simple-bus"; > + ranges = <0x0 0x73f00000 0x100000>; > + > + imx-uart@bc000 { > + compatible = "imx-uart"; > + reg = <0xbc000 0x1000>; > + interrupts = <0x1f>; > + rts-cts; > + uart-clock = <&uart0_clk>, "uart"; > + }; > + > + imx-uart@c0000 { > + compatible = "imx-uart"; > + reg = <0xc0000 0x1000>; > + interrupts = <0x20>; > + rts-cts; > + uart-clock = <&uart1_clk>, "uart"; > + }; > + }; > + > + aips@83f00000 { > + #address-cells = <0x1>; > + #size-cells = <0x1>; > + compatible = "simple-bus"; > + ranges = <0x0 0x83f00000 0x100000>; > + > + fec@ec000 { > + compatible = "fec"; > + reg = <0xec000 0x1000>; > + interrupts = <0x57>; > + fec_clk-clock = <&fec_clk>, "fec"; > + }; > + }; > +}; > -- > 1.7.0.4 > > > _______________________________________________ > linaro-dev mailing list > linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org > http://lists.linaro.org/mailman/listinfo/linaro-dev > -- Regards, Shawn