From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: Re: [PATCH V4 3/5] serial/imx: parse from device tree support
Date: Tue, 15 Mar 2011 01:07:09 -0600 [thread overview]
Message-ID: <20110315070709.GC23050@angua.secretlab.ca> (raw)
In-Reply-To: <1299733185-2172-4-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Minor comments, but otherwise goes first.
On Thu, Mar 10, 2011 at 12:59:43PM +0800, Jason Liu wrote:
> Signed-off-by: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Jason Liu <r64343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Signed-off-by: Jeremy Kerr <jeremy.kerr-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Jeremy's s-o-b should go at the top of the list. He started it, and
then you took over. s-o-b lines is the chain of people who have
handled a patch, and so it should reflect the order that they handled
it.
> ---
> drivers/tty/serial/imx.c | 79 ++++++++++++++++++++++++++++++++++++++++------
> 1 files changed, 69 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index dfcf4b1..c9483d1 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -53,6 +53,9 @@
> #include <mach/hardware.h>
> #include <mach/imx-uart.h>
>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +
These should be mixed in with the rest of the <linux/*.h> includes.
> /* Register definitions */
> #define URXD0 0x0 /* Receiver Register */
> #define URTX0 0x40 /* Transmitter Register */
> @@ -1224,6 +1227,53 @@ static int serial_imx_resume(struct platform_device *dev)
> return 0;
> }
>
> +#ifdef CONFIG_OF
> +static int serial_imx_probe_dt(struct imx_port *sport,
> + struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + static int line;
> +
> + if (!node)
> + return -ENODEV;
> +
> + if (of_get_property(node, "fsl,has-rts-cts", NULL))
> + sport->have_rtscts = 1;
> +
> + if (of_get_property(node, "fsl,irda-mode", NULL))
> + sport->use_irda = 1;
> +
> + sport->port.line = line++;
> +
> + return 0;
> +}
> +#else
> +static int serial_imx_probe_dt(struct imx_port *sport,
> + struct platform_device *pdev)
> +{
> + return -ENODEV;
> +}
> +#endif
> +
> +static int serial_imx_probe_pdata(struct imx_port *sport,
> + struct platform_device *pdev)
> +{
> + struct imxuart_platform_data *pdata = pdev->dev.platform_data;
> +
> + if (!pdata)
> + return 0;
> +
> + if (pdata->flags & IMXUART_HAVE_RTSCTS)
> + sport->have_rtscts = 1;
> +
> +#ifdef CONFIG_IRDA
> + if (pdata->flags & IMXUART_IRDA)
> + sport->use_irda = 1;
> +#endif
> + sport->port.line = pdev->id;
> +
> + return 0;
> +}
> static int serial_imx_probe(struct platform_device *pdev)
> {
> struct imx_port *sport;
> @@ -1236,6 +1286,12 @@ static int serial_imx_probe(struct platform_device *pdev)
> if (!sport)
> return -ENOMEM;
>
> + ret = serial_imx_probe_dt(sport, pdev);
> + if (ret == -ENODEV)
> + ret = serial_imx_probe_pdata(sport, pdev);
> + if (ret)
> + goto free;
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res) {
> ret = -ENODEV;
> @@ -1260,7 +1316,6 @@ static int serial_imx_probe(struct platform_device *pdev)
> sport->port.fifosize = 32;
> sport->port.ops = &imx_pops;
> sport->port.flags = UPF_BOOT_AUTOCONF;
> - sport->port.line = pdev->id;
> init_timer(&sport->timer);
> sport->timer.function = imx_timeout;
> sport->timer.data = (unsigned long)sport;
> @@ -1274,17 +1329,13 @@ static int serial_imx_probe(struct platform_device *pdev)
>
> sport->port.uartclk = clk_get_rate(sport->clk);
>
> - imx_ports[pdev->id] = sport;
> + if (imx_ports[sport->port.line]) {
> + ret = -EBUSY;
> + goto clkput;
> + }
> + imx_ports[sport->port.line] = sport;
>
> pdata = pdev->dev.platform_data;
> - if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
> - sport->have_rtscts = 1;
> -
> -#ifdef CONFIG_IRDA
> - if (pdata && (pdata->flags & IMXUART_IRDA))
> - sport->use_irda = 1;
> -#endif
> -
> if (pdata && pdata->init) {
> ret = pdata->init(pdev);
> if (ret)
> @@ -1336,6 +1387,11 @@ static int serial_imx_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static struct of_device_id imx_uart_matches[] = {
> + { .compatible = "fsl,imx51-uart" },
> + {},
> +};
> +
> static struct platform_driver serial_imx_driver = {
> .probe = serial_imx_probe,
> .remove = serial_imx_remove,
> @@ -1345,6 +1401,9 @@ static struct platform_driver serial_imx_driver = {
> .driver = {
> .name = "imx-uart",
> .owner = THIS_MODULE,
> +#if defined(CONFIG_OF)
> + .of_match_table = imx_uart_matches,
> +#endif
> },
> };
>
> --
> 1.7.1
>
next prev parent reply other threads:[~2011-03-15 7:07 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-10 4:59 [PATCH V4 0/5] Add MX51 basic DT support Jason Liu
[not found] ` <1299733185-2172-1-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-10 4:59 ` [PATCH V4 1/5] arm/dt: add basic mx51 device tree support Jason Liu
[not found] ` <1299733185-2172-2-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 7:03 ` Grant Likely
[not found] ` <20110315070342.GB23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16 3:34 ` Jason Hui
2011-03-16 5:03 ` Grant Likely
[not found] ` <AANLkTimE7iWuCf8BMVMjNYxxosnrzSbRg7P1mULAe=5W-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-16 8:45 ` Paul E. McKenney
2011-03-17 1:54 ` Shawn Guo
[not found] ` <20110317015435.GF11658-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-17 17:17 ` Grant Likely
2011-03-10 4:59 ` [PATCH V4 2/5] arm/dt: add very basic dts file for babbage board Jason Liu
[not found] ` <1299733185-2172-3-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-11 6:56 ` Shawn Guo
[not found] ` <20110311065655.GA2827-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-11 7:33 ` Jason Hui
[not found] ` <AANLkTinRtj1WpAgyPzD2+eHeESMVLZL=ziQvAfZDXb87-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-11 8:36 ` Shawn Guo
[not found] ` <20110311083502.GB2827-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-03-11 9:10 ` Jason Hui
2011-03-10 4:59 ` [PATCH V4 3/5] serial/imx: parse from device tree support Jason Liu
[not found] ` <1299733185-2172-4-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 7:07 ` Grant Likely [this message]
[not found] ` <20110315070709.GC23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16 3:35 ` Jason Hui
2011-03-10 4:59 ` [PATCH V4 4/5] net/fec: check id_entry pointer before using it Jason Liu
[not found] ` <1299733185-2172-5-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 7:09 ` Grant Likely
2011-03-10 4:59 ` [PATCH V4 5/5] net/fec: add device tree matching support Jason Liu
[not found] ` <1299733185-2172-6-git-send-email-jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-03-15 7:14 ` Grant Likely
[not found] ` <20110315071404.GE23050-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-16 3:36 ` Jason Hui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110315070709.GC23050@angua.secretlab.ca \
--to=grant.likely-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).