Re: [PATCH 2/5] arm/mxc: add clk members to ease dt clock support

[Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>]

On Tue, Mar 08, 2011 at 11:56:34AM +0800, Shawn Guo wrote:
> On Mon, Mar 07, 2011 at 10:53:37AM -0700, Grant Likely wrote:
> > On Mon, Mar 7, 2011 at 9:22 AM, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> > > The 'rate' is added for fixed-clock support, while 'pll_base' is for
> > > pll clock.  These two particular type of clocks are supposed to be
> > > gracefully supported by the common clk api when it gets ready.
> > 
> > How does the current imx clock code handle fixed and pll clocks?
> 
> For fixed-clock, the current code gets several variables holding the
> rate and then return the rate from several get_rate functions.
> 
> static unsigned long external_high_reference, external_low_reference;
> static unsigned long oscillator_reference, ckih2_reference;
> 
> static unsigned long get_high_reference_clock_rate(struct clk *clk)
> {
>         return external_high_reference;
> }
> 
> static unsigned long get_low_reference_clock_rate(struct clk *clk)
> {
>         return external_low_reference;
> }
> 
> static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
> {
>         return oscillator_reference;
> }
> 
> static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
> {
>         return ckih2_reference;
> }
> 
> With this new rate member added, all these can be consolidated into one.
> 
> For base address of pll, the current code uses the reference to clocks
> statically defined to know which pll is the one.
> 
> static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
> {
> #ifdef CONFIG_OF
>         return pll->pll_base;
> #else
>         if (pll == &pll1_main_clk)
>                 return MX51_DPLL1_BASE;
>         else if (pll == &pll2_sw_clk)
>                 return MX51_DPLL2_BASE;
>         else if (pll == &pll3_sw_clk)
>                 return MX51_DPLL3_BASE;
>         else
>                 BUG();
> 
>         return NULL;
> #endif

Be careful about stuff like this.  Remember that enabling CONFIG_OF
must *not break* board support that does not use the device tree.  The
above #ifdef block will break existing users.

g.