From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Bonesio Subject: [RFC 0/2] Tegra Harmony: Device Tree Initial Steps Date: Tue, 10 May 2011 13:14:06 -0700 Message-ID: <20110510201108.22693.50319.stgit@riker> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-arm-kernel-xIg/pKzrS19vn6HldHNs0ANdhmdF6hFW@public.gmane.org Cc: glikely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org, olofj-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org List-Id: devicetree@vger.kernel.org These patches are the first steps towards getting the board specific devices on the Tegra Harmony board to be discovered and initialized using only a device tree - rather than platform specific code. In particular, this patch set is getting ready to initialize i2c devices based solely on a device tree. This patch series is presented at this time only for review and comments. --- John Bonesio (2): ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized ARM: Tegra: Device Tree Support: Add i2c devices arch/arm/boot/dts/tegra250.dtsi | 33 +++++++++++ arch/arm/mach-tegra/Makefile | 1 arch/arm/mach-tegra/board-dt.c | 120 ++++++++++++++++----------------------- drivers/i2c/busses/i2c-tegra.c | 4 + 4 files changed, 87 insertions(+), 71 deletions(-) -- - John