From: Grant Likely <grant.likely@secretlab.ca>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-mmc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, patches@linaro.org,
Troy Kisky <troy.kisky@boundarydevices.com>,
Wolfram Sang <w.sang@pengutronix.de>, Chris Ball <cjb@laptop.org>
Subject: Re: [PATCH v3 1/4] mmc: sdhci-esdhc-imx: do not reference platform data after probe
Date: Wed, 6 Jul 2011 15:03:26 -0600 [thread overview]
Message-ID: <20110706210326.GC5371@ponder.secretlab.ca> (raw)
In-Reply-To: <1309970870-13336-2-git-send-email-shawn.guo@linaro.org>
On Thu, Jul 07, 2011 at 12:47:47AM +0800, Shawn Guo wrote:
> The patch copies platform data into pltfm_imx_data and reference
> the data there than platform data after probe.
>
> This work is inspired by Grant Likely and Troy Kisky.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Troy Kisky <troy.kisky@boundarydevices.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Chris Ball <cjb@laptop.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
> ---
> drivers/mmc/host/sdhci-esdhc-imx.c | 22 +++++++++++++---------
> 1 files changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 3cc6f61..0b0e62e 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -45,6 +45,7 @@
> struct pltfm_imx_data {
> int flags;
> u32 scratchpad;
> + struct esdhc_platform_data boarddata;
> };
>
> static unsigned int esdhc_pltfm_get_max_blk_size(struct sdhci_host *host)
> @@ -69,8 +70,9 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i
>
> static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
> {
> - struct esdhc_platform_data *boarddata =
> - host->mmc->parent->platform_data;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct pltfm_imx_data *imx_data = pltfm_host->priv;
> + struct esdhc_platform_data *boarddata = &imx_data->boarddata;
>
> /* fake CARD_PRESENT flag */
> u32 val = readl(host->ioaddr + reg);
> @@ -92,8 +94,7 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct pltfm_imx_data *imx_data = pltfm_host->priv;
> - struct esdhc_platform_data *boarddata =
> - host->mmc->parent->platform_data;
> + struct esdhc_platform_data *boarddata = &imx_data->boarddata;
>
> if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
> && (boarddata->cd_type == ESDHC_CD_GPIO)))
> @@ -210,8 +211,9 @@ static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
>
> static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
> {
> - struct esdhc_platform_data *boarddata =
> - host->mmc->parent->platform_data;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct pltfm_imx_data *imx_data = pltfm_host->priv;
> + struct esdhc_platform_data *boarddata = &imx_data->boarddata;
>
> switch (boarddata->wp_type) {
> case ESDHC_WP_GPIO:
> @@ -291,12 +293,14 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
> if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
> imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
>
> - boarddata = host->mmc->parent->platform_data;
> - if (!boarddata) {
> + if (!host->mmc->parent->platform_data) {
> dev_err(mmc_dev(host->mmc), "no board data!\n");
> err = -EINVAL;
> goto no_board_data;
> }
> + imx_data->boarddata = *((struct esdhc_platform_data *)
> + host->mmc->parent->platform_data);
> + boarddata = &imx_data->boarddata;
>
> /* write_protect */
> if (boarddata->wp_type == ESDHC_WP_GPIO) {
> @@ -373,8 +377,8 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
> {
> struct sdhci_host *host = platform_get_drvdata(pdev);
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> - struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
> struct pltfm_imx_data *imx_data = pltfm_host->priv;
> + struct esdhc_platform_data *boarddata = &imx_data->boarddata;
> int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
>
> sdhci_remove_host(host, dead);
> --
> 1.7.4.1
>
>
next prev parent reply other threads:[~2011-07-06 21:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-06 16:47 [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx Shawn Guo
2011-07-06 16:47 ` [PATCH v3 1/4] mmc: sdhci-esdhc-imx: do not reference platform data after probe Shawn Guo
2011-07-06 21:03 ` Grant Likely [this message]
2011-07-06 16:47 ` [PATCH v3 2/4] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx() Shawn Guo
2011-07-06 16:47 ` [PATCH v3 3/4] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host Shawn Guo
2011-07-06 16:47 ` [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support Shawn Guo
2011-07-06 21:05 ` Grant Likely
2011-07-13 15:52 ` Anton Vorontsov
2011-07-13 16:09 ` Scott Wood
2011-07-13 16:28 ` Anton Vorontsov
2011-07-13 16:36 ` Grant Likely
2011-07-13 17:32 ` Anton Vorontsov
2011-07-09 22:14 ` [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx Chris Ball
2011-07-10 1:37 ` Shawn Guo
2011-07-19 1:51 ` Chris Ball
2011-07-19 8:10 ` Sascha Hauer
2011-07-19 8:59 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110706210326.GC5371@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=cjb@laptop.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=shawn.guo@linaro.org \
--cc=troy.kisky@boundarydevices.com \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).