[PATCH 2/2 v3] power: bq20z75: Add Device Tree Binding

[PATCH 2/2 v3] power: bq20z75: Add Device Tree Binding

[Rhyland Klein]

Adding the binding for the TI bq20z75 fuel gadge and the
bq20z75 driver.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
	v2: Fixed typo in binding description
	v3: Changed unique properties to be use "ti,"
	    Changed to use single gpio entry for gpio info

 .../bindings/power_supply/ti_bq20z75.txt           |   23 ++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt

diff --git a/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
new file mode 100644
index 0000000..7571294
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
@@ -0,0 +1,23 @@
+TI bq20z75
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq20z75"
+
+Optional properties :
+ - ti,i2c-retry-count : The number of times to retry i2c transactions on i2c
+   IO failure.
+ - ti,poll-retry-count : The number of times to try looking for new status
+   after an external change notification.
+ - ti,battery-detect-gpios : The gpio which signals battery detection and
+   a flag specifying its polarity.
+
+Example:
+
+	bq20z75@b {
+		compatible = "ti,bq20z75";
+		reg = < 0xb >;
+		ti,i2c-retry-count = <2>;
+		ti,poll-retry-count = <10>;
+		ti,battery-detect-gpios = <&gpio-controller 122 1>;
+	}
-- 
1.7.6

Re: [PATCH 2/2 v3] power: bq20z75: Add Device Tree Binding

[Grant Likely]

On Tue, Sep 13, 2011 at 02:21:39PM -0700, Rhyland Klein wrote:
> Adding the binding for the TI bq20z75 fuel gadge and the
> bq20z75 driver.

Squash this patch into the first patch.  There is no reason to keep
them separate.

> 
> Signed-off-by: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> 	v2: Fixed typo in binding description
> 	v3: Changed unique properties to be use "ti,"
> 	    Changed to use single gpio entry for gpio info
> 
>  .../bindings/power_supply/ti_bq20z75.txt           |   23 ++++++++++++++++++++
>  1 files changed, 23 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
> 
> diff --git a/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
> new file mode 100644
> index 0000000..7571294
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
> @@ -0,0 +1,23 @@
> +TI bq20z75
> +~~~~~~~~~~
> +
> +Required properties :
> + - compatible : "ti,bq20z75"
> +
> +Optional properties :
> + - ti,i2c-retry-count : The number of times to retry i2c transactions on i2c
> +   IO failure.
> + - ti,poll-retry-count : The number of times to try looking for new status
> +   after an external change notification.
> + - ti,battery-detect-gpios : The gpio which signals battery detection and
> +   a flag specifying its polarity.
> +
> +Example:
> +
> +	bq20z75@b {
> +		compatible = "ti,bq20z75";
> +		reg = < 0xb >;
> +		ti,i2c-retry-count = <2>;
> +		ti,poll-retry-count = <10>;
> +		ti,battery-detect-gpios = <&gpio-controller 122 1>;
> +	}
> -- 
> 1.7.6
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel