From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH v3 0/4] OMAP serial device tree support Date: Fri, 16 Dec 2011 13:57:31 -0800 Message-ID: <20111216215731.GQ32251@atomide.com> References: <1323863746-18145-1-git-send-email-rnayak@ti.com> <4EE8A90A.10206@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <4EE8A90A.10206@gmail.com> Sender: linux-omap-owner@vger.kernel.org To: Rob Herring Cc: Rajendra Nayak , linux-serial@vger.kernel.org, linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, khilman@ti.com, govindraj.raja@ti.com, b-cousson@ti.com, linux-arm-kernel@lists.infradead.org, linaro-dev@lists.linaro.org, patches@linaro.org List-Id: devicetree@vger.kernel.org Rob, * Rob Herring [111214 05:16]: > On 12/14/2011 05:55 AM, Rajendra Nayak wrote: > > v3 is rebased on top of the latest serial runtime > > patches[1] and boot tested with/without DT on OMAP4 > > SDP and OMAP4 Panda boards. > > > > Patches can be found here.. > > git://gitorious.org/omap-pm/linux.git for-dt/serial > > > > I also had to pull in a fix[2] for DT testing (already in linux-omap > > master) which was missing as the serial runtime branch[1] > > was based on an older master commit. > > > > Changes in v3: > > -1- Rebased on latest serial runtime patches > > -2- Minor typr fixes > > > > Changes in v2: > > -1- Got rid of binding to define which uart is console > > -2- Added checks to default clock speed to 48Mhz > > -3- Added compatible for each OMAP family > > -4- Used of_alias_get_id to populate port.line > > > > [1] git://gitorious.org/runtime_3-0/runtime_3-0.git for_3_3/lo_rc4_uartruntime > > [2] http://www.spinics.net/lists/arm-kernel/msg150751.html > > > > Rajendra Nayak (4): > > omap-serial: Get rid of all pdev->id usage > > omap-serial: Use default clock speed (48Mhz) if not specified > > omap-serial: Add minimal device tree support > > ARM: omap: pass minimal SoC/board data for UART from dt > > > > .../devicetree/bindings/serial/omap_serial.txt | 10 +++ > > arch/arm/boot/dts/omap3.dtsi | 31 ++++++++ > > arch/arm/boot/dts/omap4.dtsi | 28 +++++++ > > arch/arm/mach-omap2/board-generic.c | 1 - > > drivers/tty/serial/omap-serial.c | 80 +++++++++++++++---- > > 5 files changed, 132 insertions(+), 18 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt > > Looks good. For the series: > > Reviewed-by: Rob Herring Care to check if your Reviewed-by can also be applied to the additional patch "[PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430" that's needed to keep serial port working for omap2 with this series? Regards, Tony