From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 4/6] ARM: at91/gpio: add .to_irq gpio_chip handler and rework irq_to_gpio
Date: Wed, 4 Jan 2012 12:47:21 -0700 [thread overview]
Message-ID: <20120104194721.GB15503@ponder.secretlab.ca> (raw)
In-Reply-To: <57a5d54dd158c909a3c854b5bfc873a5f43e60ea.1323975517.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
On Thu, Dec 15, 2011 at 08:16:06PM +0100, Nicolas Ferre wrote:
> Replace the gpio_to_irq() macro by a plain gpiolib .to_irq() handler.
> The irq_to_gpio() macro is removed. A local replacement is created
> to fill the need of the gpio driver, internally.
>
> Those calls are using the irqdomain to translate hardware to Linux
> IRQ numbers.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> ---
> arch/arm/mach-at91/gpio.c | 23 +++++++++++++++++++++++
> arch/arm/mach-at91/include/mach/gpio.h | 12 ------------
> 2 files changed, 23 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index edb453a..c390f71 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -11,6 +11,7 @@
>
> #include <linux/clk.h>
> #include <linux/errno.h>
> +#include <linux/device.h>
> #include <linux/gpio.h>
> #include <linux/interrupt.h>
> #include <linux/irq.h>
> @@ -46,6 +47,7 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
> unsigned offset, int val);
> static int at91_gpiolib_direction_input(struct gpio_chip *chip,
> unsigned offset);
> +static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
>
> #define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
> { \
> @@ -57,6 +59,7 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
> .set = at91_gpiolib_set, \
> .dbg_show = at91_gpiolib_dbg_show, \
> .base = base_gpio, \
> + .to_irq = at91_gpiolib_to_irq, \
> .ngpio = nr_gpio, \
> }, \
> }
> @@ -86,6 +89,16 @@ static inline unsigned pin_to_mask(unsigned pin)
> }
>
>
> +/*
> + * As gpio IRQs are stacked without holes, we can determine
> + * the gpio form an irq number comparing it with the first IRQ of first
> + * GPIO/IRQ domain.
> + */
> +static inline unsigned irq_to_gpio(unsigned irq)
> +{
> + return irq - irq_domain_to_irq(&gpio_chip[0].domain, 0);
> +}
> +
> /*--------------------------------------------------------------------------*/
>
> /* Not all hardware capabilities are exposed through these calls; they
> @@ -625,6 +638,16 @@ static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
> }
> }
>
> +static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset)
> +{
> + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
> + int retirq = irq_domain_to_irq(&at91_gpio->domain, offset);
> +
> + dev_dbg(chip->dev, "request IRQ for GPIO %d, return %d\n", offset,
> + retirq);
> + return retirq;
> +}
> +
> #ifdef CONFIG_OF_GPIO
> static void __init of_at91_gpio_init_one(struct device_node *np)
> {
> diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
> index e3fd225..7cf009b 100644
> --- a/arch/arm/mach-at91/include/mach/gpio.h
> +++ b/arch/arm/mach-at91/include/mach/gpio.h
> @@ -204,18 +204,6 @@ extern int at91_get_gpio_value(unsigned pin);
> extern void at91_gpio_suspend(void);
> extern void at91_gpio_resume(void);
>
> -/*-------------------------------------------------------------------------*/
> -
> -/* wrappers for "new style" GPIO calls. the old AT91-specific ones should
> - * eventually be removed (along with this errno.h inclusion), and the
> - * gpio request/free calls should probably be implemented.
> - */
> -
> -#include <asm/errno.h>
> -
> -#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS)
> -#define irq_to_gpio(irq) (irq - NR_AIC_IRQS)
> -
> #endif /* __ASSEMBLY__ */
>
> #endif
> --
> 1.7.5.4
>
next prev parent reply other threads:[~2012-01-04 19:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-15 19:16 [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO Nicolas Ferre
[not found] ` <1323976568-20244-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2011-12-15 19:16 ` [PATCH v4 1/6] ARM: at91/aic: add irq domain and device tree support Nicolas Ferre
2011-12-15 19:16 ` [PATCH 2/6] ARM: at91/gpio: add irqdomain to gpio interrupts Nicolas Ferre
[not found] ` <56e135f94dc4d88ab6d586f13e406977c4f4bb35.1323975517.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-04 19:42 ` Grant Likely
2011-12-15 19:16 ` [PATCH 3/6] ARM: at91/gpio: add DT support Nicolas Ferre
[not found] ` <876f676ec80d2db927e379654be76171ca496422.1323975517.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2011-12-16 10:11 ` Jamie Iles
2012-01-03 16:25 ` Nicolas Ferre
2012-01-03 18:34 ` [PATCH v2 " Nicolas Ferre
[not found] ` <1325615688-16860-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-04 19:45 ` Grant Likely
2012-01-04 22:04 ` Russell King - ARM Linux
2012-01-05 19:42 ` [PATCH v3 " Nicolas Ferre
[not found] ` <1325792566-32700-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-05 17:50 ` Nicolas Ferre
2012-01-05 20:03 ` [PATCH v4 " Nicolas Ferre
2011-12-15 19:16 ` [PATCH 4/6] ARM: at91/gpio: add .to_irq gpio_chip handler and rework irq_to_gpio Nicolas Ferre
[not found] ` <57a5d54dd158c909a3c854b5bfc873a5f43e60ea.1323975517.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-04 19:47 ` Grant Likely [this message]
2011-12-15 19:16 ` [PATCH 5/6] ARM: at91/gpio: remove the static specification of gpio_chip.base Nicolas Ferre
[not found] ` <62da3cffc145e2ada7ecbf4939a6029eb482d116.1323975517.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-04 19:47 ` Grant Likely
2011-12-15 19:16 ` [PATCH 6/6] ARM: at91/board-dt: remove AIC irq domain from board file Nicolas Ferre
[not found] ` <9fea5224b3a6544bd07c6e877d12870de9403b98.1323975517.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-04 19:48 ` Grant Likely
2011-12-16 1:53 ` [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO Rob Herring
[not found] ` <4EEAA4A7.3040902-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-12-16 16:29 ` Nicolas Ferre
[not found] ` <85d531b5686e5eff623bed9618f802198409905f.1323975517.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-04 19:40 ` [PATCH v4 1/6] ARM: at91/aic: add irq domain and device tree support Grant Likely
[not found] ` <20120104194059.GY15503-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2012-01-05 16:26 ` Nicolas Ferre
[not found] ` <4F05CF48.5050007-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-05 18:02 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120104194721.GB15503@ponder.secretlab.ca \
--to=grant.likely-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).