devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v3] ARM: at91: pit add DT support
Date: Thu, 5 Jan 2012 11:00:28 -0700	[thread overview]
Message-ID: <20120105180028.GB22653@ponder.secretlab.ca> (raw)
In-Reply-To: <1325784348-29481-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

On Thu, Jan 05, 2012 at 06:25:48PM +0100, Nicolas Ferre wrote:
> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
> 
> Retreive registers address and IRQ from device tree entry. Fall back
> to built-in values if an error occurs.
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
> [nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org: change error path and interrupts property handling]
> Signed-off-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> ---
> v3: - use irq_of_parse_and_map() for handling irq numbers specified by DT.
>       Correction proposed by Jamie Iles.
> 
> v2: - new specification of irq numbers in DT (due to modification of AIC code)
>     - new error path in of_at91sam926x_pit_init()
>     - fall back to built-in values if an error occurs
>     - use of of_property_read_u32() to get irq property
> 
>  .../devicetree/bindings/arm/atmel-at91.txt         |    8 +++
>  arch/arm/boot/dts/at91sam9g20.dtsi                 |    5 ++
>  arch/arm/boot/dts/at91sam9g45.dtsi                 |    6 ++
>  arch/arm/mach-at91/at91sam926x_time.c              |   53 +++++++++++++++++++-
>  4 files changed, 70 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/atmel-at91.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
> new file mode 100644
> index 0000000..380f711
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
> @@ -0,0 +1,8 @@
> +Atmel AT91 device tree bindings.
> +================================
> +
> +PIT Timer required properties:
> +- compatible: Should be "atmel,at91sam9260-pit"
> +- reg: Should contain registers location and length
> +- interrupts: Should contain interrupt for the PIT which is the IRQ line
> +  shared across all System Controller members.
> diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
> index 0d21872..5c4be7e 100644
> --- a/arch/arm/boot/dts/at91sam9g20.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20.dtsi
> @@ -57,6 +57,11 @@
>  				reg = <0xfffff000 0x200>;
>  			};
>  
> +			pit: timer@fffffd30 {
> +				compatible = "atmel,at91sam9260-pit";
> +				reg = <0xfffffd30 0xf>;
> +				interrupts = <1 4>;
> +			};
>  
>  			pioA: gpio@fffff400 {
>  				compatible = "atmel,at91rm9200-gpio";
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index b977a79..0d21c8e 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -58,6 +58,12 @@
>  				reg = <0xfffff000 0x200>;
>  			};
>  
> +			pit: timer@fffffd30 {
> +				compatible = "atmel,at91sam9260-pit";
> +				reg = <0xfffffd30 0xf>;
> +				interrupts = <1 4>;
> +			};
> +
>  			dma: dma-controller@ffffec00 {
>  				compatible = "atmel,at91sam9g45-dma";
>  				reg = <0xffffec00 0x200>;
> diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
> index d89ead7..534a992 100644
> --- a/arch/arm/mach-at91/at91sam926x_time.c
> +++ b/arch/arm/mach-at91/at91sam926x_time.c
> @@ -14,6 +14,9 @@
>  #include <linux/kernel.h>
>  #include <linux/clk.h>
>  #include <linux/clockchips.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>  
>  #include <asm/mach/time.h>
>  
> @@ -133,7 +136,8 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
>  static struct irqaction at91sam926x_pit_irq = {
>  	.name		= "at91_tick",
>  	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
> -	.handler	= at91sam926x_pit_interrupt
> +	.handler	= at91sam926x_pit_interrupt,
> +	.irq		= AT91_ID_SYS,
>  };
>  
>  static void at91sam926x_pit_reset(void)
> @@ -149,6 +153,49 @@ static void at91sam926x_pit_reset(void)
>  	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
>  }
>  
> +#ifdef CONFIG_OF
> +static struct of_device_id timer_ids[] = {
> +	{ .compatible = "atmel,at91sam9260-pit" },
> +	{ /* sentinel */ }
> +};
> +
> +static int __init of_at91sam926x_pit_init(void)
> +{
> +	struct device_node	*np;
> +	int			ret;
> +
> +	np = of_find_matching_node(NULL, timer_ids);
> +	if (!np)
> +		goto err;
> +
> +	pit_base_addr = of_iomap(np, 0);
> +	if (!pit_base_addr)
> +		goto node_err;
> +
> +	/* Get the interrupts property */
> +	ret = irq_of_parse_and_map(np, 0);
> +	if (ret <= 0)
> +		goto ioremap_err;

if (!ret)

The DT irq functions return 0 on failure.

g.

  parent reply	other threads:[~2012-01-05 18:00 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1318799895-5121-4-git-send-email-plagnioj@jcrosoft.com>
     [not found] ` <1318799895-5121-4-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2012-01-05 13:48   ` [PATCH v2] ARM: at91: pit add DT support Nicolas Ferre
     [not found]     ` <1325771308-19770-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-05 12:00       ` Jamie Iles
2012-01-05 14:50         ` Nicolas Ferre
     [not found]           ` <4F05B8A1.2010003-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-05 14:56             ` Jamie Iles
2012-01-05 17:25       ` [PATCH v3] " Nicolas Ferre
     [not found]         ` <1325784348-29481-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-05 15:34           ` Jamie Iles
2012-01-05 16:42           ` Rob Herring
     [not found]             ` <4F05D2F3.40704-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-01-06 13:36               ` Nicolas Ferre
2012-01-05 18:00           ` Grant Likely [this message]
     [not found]             ` <20120105180028.GB22653-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2012-01-06 13:37               ` Nicolas Ferre
2012-01-06 16:20           ` [PATCH v4] " Nicolas Ferre
     [not found]             ` <1325866830-13259-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2012-01-06 15:47               ` Rob Herring
     [not found]                 ` <4F071799.3030200-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-01-06 17:28                   ` Nicolas Ferre
2012-01-09 17:39                 ` Jean-Christophe PLAGNIOL-VILLARD
     [not found]                   ` <20120109173917.GO2854-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
2012-01-10  8:34                     ` Nicolas Ferre
2012-02-22 14:32               ` [PATCH v5 1/2] " Nicolas Ferre
2012-02-22 14:32                 ` [PATCH v5 2/2] ARM: at91/pit: add traces in case of error Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120105180028.GB22653@ponder.secretlab.ca \
    --to=grant.likely-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).