* [PATCH v4 01/12] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 02/12] i2c: OMAP: Add DT support for i2c controller Benoit Cousson
` (9 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In the case of DT, the PMIC and SR initialization will be done using
a completely different mechanism.
Disable this part if a DT blob is available.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Acked-by: Kevin Hilman <khilman-l0cyMroinI0@public.gmane.org>
---
arch/arm/mach-omap2/pm.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1881fe9..ad4f693 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -227,6 +227,14 @@ postcore_initcall(omap2_common_pm_init);
static int __init omap2_common_pm_late_init(void)
{
+ /*
+ * In the case of DT, the PMIC and SR initialization will be done using
+ * a completely different mechanism.
+ * Disable this part if a DT blob is available.
+ */
+ if (of_have_populated_dt())
+ return 0;
+
/* Init the voltage layer */
omap_pmic_late_init();
omap_voltage_late_init();
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 02/12] i2c: OMAP: Add DT support for i2c controller
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
2011-12-22 14:56 ` [PATCH v4 01/12] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030 Benoit Cousson
` (8 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: Kevin Hilman, sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add initial DT support to retrieve the frequency using a
DT attribute instead of the pdata pointer if of_node exist.
Add documentation for omap i2c controller binding.
Based on original patches from Manju and Grant.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: Kevin Hilman <khilman-l0cyMroinI0@public.gmane.org>
Reviewed-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
Documentation/devicetree/bindings/i2c/omap-i2c.txt | 30 ++++++
drivers/i2c/busses/i2c-omap.c | 102 +++++++++++++-------
2 files changed, 97 insertions(+), 35 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/omap-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
new file mode 100644
index 0000000..56564aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
@@ -0,0 +1,30 @@
+I2C for OMAP platforms
+
+Required properties :
+- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Recommended properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
+ the default 100 kHz frequency will be used.
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Note: Current implementation will fetch base address, irq and dma
+from omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples :
+
+i2c1: i2c@0 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ clock-frequency = <400000>;
+};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a43d002..b03b3e3 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -37,6 +37,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
@@ -182,7 +185,9 @@ struct omap_i2c_dev {
u32 latency; /* maximum mpu wkup latency */
void (*set_mpu_wkup_lat)(struct device *dev,
long latency);
- u32 speed; /* Speed of bus in Khz */
+ u32 speed; /* Speed of bus in kHz */
+ u32 dtrev; /* extra revision from DT */
+ u32 flags;
u16 cmd_err;
u8 *buf;
u8 *regs;
@@ -266,11 +271,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
- struct omap_i2c_bus_platform_data *pdata;
-
- pdata = dev->dev->platform_data;
-
- if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
+ if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
@@ -291,13 +292,10 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
- struct omap_i2c_bus_platform_data *pdata;
u16 iv;
- pdata = dev->dev->platform_data;
-
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
- if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
else
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
@@ -320,9 +318,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
unsigned long timeout;
unsigned long internal_clk = 0;
struct clk *fclk;
- struct omap_i2c_bus_platform_data *pdata;
-
- pdata = dev->dev->platform_data;
if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */
@@ -373,7 +368,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
+ if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/*
* The I2C functional clock is the armxor_ck, so there's
* no need to get "armxor_ck" separately. Now, if OMAP2420
@@ -397,7 +392,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
psc = fclk_rate / 12000000;
}
- if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
+ if (!(dev->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
/*
* HSI2C controller internal clk rate should be 19.2 Mhz for
@@ -406,7 +401,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
* The filter is iclk (fclk for HS) period.
*/
if (dev->speed > 400 ||
- pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
+ dev->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
internal_clk = 19200;
else if (dev->speed > 100)
internal_clk = 9600;
@@ -475,7 +470,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
dev->errata = 0;
- if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
+ if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207;
/* Enable interrupts */
@@ -484,7 +479,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
- if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
+ if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
dev->pscstate = psc;
dev->scllstate = scll;
dev->sclhstate = sclh;
@@ -804,9 +799,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
u16 bits;
u16 stat, w;
int err, count = 0;
- struct omap_i2c_bus_platform_data *pdata;
-
- pdata = dev->dev->platform_data;
if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
@@ -875,7 +867,7 @@ complete:
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (pdata->flags &
+ if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
*dev->buf++ = w >> 8;
@@ -918,7 +910,7 @@ complete:
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (pdata->flags &
+ if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
w |= *dev->buf++ << 8;
@@ -965,6 +957,32 @@ static const struct i2c_algorithm omap_i2c_algo = {
.functionality = omap_i2c_func,
};
+#ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap3_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap4_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_2,
+};
+
+static const struct of_device_id omap_i2c_of_match[] = {
+ {
+ .compatible = "ti,omap4-i2c",
+ .data = &omap4_pdata,
+ },
+ {
+ .compatible = "ti,omap3-i2c",
+ .data = &omap3_pdata,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
+#endif
+
static int __devinit
omap_i2c_probe(struct platform_device *pdev)
{
@@ -972,9 +990,10 @@ omap_i2c_probe(struct platform_device *pdev)
struct i2c_adapter *adap;
struct resource *mem, *irq, *ioarea;
struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *match;
irq_handler_t isr;
int r;
- u32 speed = 0;
/* NOTE: driver uses the static register mapping */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1001,15 +1020,24 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_release_region;
}
- if (pdata != NULL) {
- speed = pdata->clkrate;
+ match = of_match_device(omap_i2c_of_match, &pdev->dev);
+ if (match) {
+ u32 freq = 100000; /* default to 100000 Hz */
+
+ pdata = match->data;
+ dev->dtrev = pdata->rev;
+ dev->flags = pdata->flags;
+
+ of_property_read_u32(node, "clock-frequency", &freq);
+ /* convert DT freq value in Hz into kHz for speed */
+ dev->speed = freq / 1000;
+ } else if (pdata != NULL) {
+ dev->speed = pdata->clkrate;
+ dev->flags = pdata->flags;
dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
- } else {
- speed = 100; /* Default speed */
- dev->set_mpu_wkup_lat = NULL;
+ dev->dtrev = pdata->rev;
}
- dev->speed = speed;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, resource_size(mem));
@@ -1020,9 +1048,9 @@ omap_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
- dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
+ dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
- if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
dev->regs = (u8 *)reg_map_ip_v2;
else
dev->regs = (u8 *)reg_map_ip_v1;
@@ -1035,7 +1063,7 @@ omap_i2c_probe(struct platform_device *pdev)
if (dev->rev <= OMAP_I2C_REV_ON_3430)
dev->errata |= I2C_OMAP3_1P153;
- if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) {
+ if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
/* Set up the fifo size - Get total size */
@@ -1057,7 +1085,7 @@ omap_i2c_probe(struct platform_device *pdev)
/* calculate wakeup latency constraint for MPU */
if (dev->set_mpu_wkup_lat != NULL)
dev->latency = (1000000 * dev->fifo_size) /
- (1000 * speed / 8);
+ (1000 * dev->speed / 8);
}
/* reset ASAP, clearing any IRQs */
@@ -1073,7 +1101,7 @@ omap_i2c_probe(struct platform_device *pdev)
}
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
- pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+ dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
pm_runtime_put(dev->dev);
@@ -1084,6 +1112,7 @@ omap_i2c_probe(struct platform_device *pdev)
strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
/* i2c device drivers may be active on return from add_adapter() */
adap->nr = pdev->id;
@@ -1093,6 +1122,8 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_free_irq;
}
+ of_i2c_register_devices(adap);
+
return 0;
err_free_irq:
@@ -1165,6 +1196,7 @@ static struct platform_driver omap_i2c_driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
.pm = OMAP_I2C_PM_OPS,
+ .of_match_table = of_match_ptr(omap_i2c_of_match),
},
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
2011-12-22 14:56 ` [PATCH v4 01/12] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 02/12] i2c: OMAP: Add DT support for i2c controller Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
[not found] ` <1324565806-31142-4-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
2011-12-22 14:56 ` [PATCH v4 04/12] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030 Benoit Cousson
` (7 subsequent siblings)
10 siblings, 1 reply; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA, Graeme Gregory,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA, Balaji T K,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add initial device-tree support for twl familly chips.
The current version is missing the regulator entries due
to the lack of DT regulator bindings for the moment.
Only the simple sub-modules that do not depend on
platform_data information can be initialized properly.
Add irqdomain support.
Add documentation for the Texas Instruments TWL Integrated Chip.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Balaji T K <balajitk-l0cyMroinI0@public.gmane.org>
Cc: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
Cc: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
.../devicetree/bindings/mfd/twl-familly.txt | 47 ++++++++++++++++++
drivers/mfd/Kconfig | 1 +
drivers/mfd/twl-core.c | 51 +++++++++++++++++++-
3 files changed, 98 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/twl-familly.txt
diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 0000000..ff4cacd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+ For Integrated power-management/audio CODEC device used in OMAP3
+ based boards
+- compatible : Must be "ti,twl6030";
+ For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+ it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of severals variants
+ that support a different number of features.
+ The children nodes will thus depend of the capabilty of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+ compatible = "ti,twl6030";
+ reg = <0x48>;
+ interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ twl_rtc {
+ compatible = "ti,twl_rtc";
+ interrupts = <11>;
+ reg = <0>;
+ };
+};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f1391c2..f0de088 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -200,6 +200,7 @@ config MENELAUS
config TWL4030_CORE
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
+ select IRQ_DOMAIN
help
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index bfbd660..698bf0d 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -34,6 +34,11 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
#include <linux/regulator/machine.h>
@@ -144,6 +149,9 @@
#define TWL_MODULE_LAST TWL4030_MODULE_LAST
+#define TWL4030_NR_IRQS 8
+#define TWL6030_NR_IRQS 20
+
/* Base Address defns for twl4030_map[] */
/* subchip/slave 0 - USB ID */
@@ -255,6 +263,7 @@ struct twl_client {
static struct twl_client twl_modules[TWL_NUM_SLAVES];
+static struct irq_domain domain;
/* mapping the module id to slave id and base address */
struct twl_mapping {
@@ -1183,14 +1192,48 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
int status;
unsigned i;
struct twl4030_platform_data *pdata = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
u8 temp;
int ret = 0;
+ int nr_irqs = TWL4030_NR_IRQS;
+
+ if ((id->driver_data) & TWL6030_CLASS)
+ nr_irqs = TWL6030_NR_IRQS;
+
+ if (node && !pdata) {
+ /*
+ * XXX: Temporary pdata until the information is correctly
+ * retrieved by every TWL modules from DT.
+ */
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct twl4030_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ }
if (!pdata) {
dev_dbg(&client->dev, "no platform data?\n");
return -EINVAL;
}
+ status = irq_alloc_descs(-1, pdata->irq_base, nr_irqs, 0);
+ if (IS_ERR_VALUE(status)) {
+ dev_err(&client->dev, "Fail to allocate IRQ descs\n");
+ return status;
+ }
+
+ pdata->irq_base = status;
+ pdata->irq_end = pdata->irq_base + nr_irqs;
+
+ domain.irq_base = pdata->irq_base;
+ domain.nr_irq = nr_irqs;
+#ifdef CONFIG_OF_IRQ
+ domain.of_node = of_node_get(node);
+ domain.ops = &irq_domain_simple_ops;
+#endif
+ irq_domain_add(&domain);
+
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
return -EIO;
@@ -1270,7 +1313,13 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
}
- status = add_children(pdata, id->driver_data);
+#ifdef CONFIG_OF_DEVICE
+ if (node)
+ status = of_platform_populate(node, NULL, NULL, &client->dev);
+ else
+#endif
+ status = add_children(pdata, id->driver_data);
+
fail:
if (status < 0)
twl_remove(client);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 04/12] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (2 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030 Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 05/12] arm/dts: OMAP4: Add i2c controller nodes Benoit Cousson
` (6 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: Alessandro Zummo, sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add the DT support for the TI rtc-twl present in the twl4030
and twl6030 devices.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
---
Documentation/devicetree/bindings/rtc/twl-rtc.txt | 12 ++++++++++++
drivers/rtc/rtc-twl.c | 10 ++++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/twl-rtc.txt
diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
new file mode 100644
index 0000000..596e0c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
@@ -0,0 +1,12 @@
+* TI twl RTC
+
+The TWL family (twl4030/6030) contains a RTC.
+
+Required properties:
+- compatible : Should be twl4030-rtc
+
+Examples:
+
+rtc@0 {
+ compatible = "ti,twl4030-rtc";
+};
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index 20687d5..d43b4f6 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -550,6 +550,11 @@ static int twl_rtc_resume(struct platform_device *pdev)
#define twl_rtc_resume NULL
#endif
+static const struct of_device_id twl_rtc_of_match[] = {
+ {.compatible = "ti,twl4030-rtc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl_rtc_of_match);
MODULE_ALIAS("platform:twl_rtc");
static struct platform_driver twl4030rtc_driver = {
@@ -559,8 +564,9 @@ static struct platform_driver twl4030rtc_driver = {
.suspend = twl_rtc_suspend,
.resume = twl_rtc_resume,
.driver = {
- .owner = THIS_MODULE,
- .name = "twl_rtc",
+ .owner = THIS_MODULE,
+ .name = "twl_rtc",
+ .of_match_table = twl_rtc_of_match,
},
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 05/12] arm/dts: OMAP4: Add i2c controller nodes
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (3 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 04/12] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030 Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 06/12] arm/dts: OMAP3: " Benoit Cousson
` (5 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add i2c controllers nodes into the main ocp bus.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/omap4.dtsi | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index bede009..9872283 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -100,5 +100,33 @@
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
};
+
+ i2c1: i2c@1 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@2 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@3 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+
+ i2c4: i2c@4 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c4";
+ };
};
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 06/12] arm/dts: OMAP3: Add i2c controller nodes
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (4 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 05/12] arm/dts: OMAP4: Add i2c controller nodes Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 07/12] arm/dts: twl6030: Add DTS file for twl6030 PMIC Benoit Cousson
` (4 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add i2c controllers nodes into the main ocp bus.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/omap3.dtsi | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 6866dc7..697b210 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -61,5 +61,26 @@
ti,intc-size = <96>;
reg = <0x48200000 0x1000>;
};
+
+ i2c1: i2c@1 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@2 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@3 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
};
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 07/12] arm/dts: twl6030: Add DTS file for twl6030 PMIC
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (5 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 06/12] arm/dts: OMAP3: " Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 08/12] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC Benoit Cousson
` (3 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add a dedicated DTS file for the twl6030 Power IC.
This chip is a big SoC that will be reused in a lot of various
OMAP4+ boards.
Note: This file is supposed to be included in a board DTS that will
create the twl node in order to allow the &twl reference to work.
Exmaple:
...
&i2c1 {
twl: twl@48 {
reg = <0x48>;
interrupts = <0 7 4>;
interrupt-controller;
interrupt-parent = <&gic>;
};
};
/include/ "twl6030.dtsi"
...
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/twl6030.dtsi | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/twl6030.dtsi
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
new file mode 100644
index 0000000..b7b4e5e
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+ compatible = "ti,twl6030";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 08/12] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (6 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 07/12] arm/dts: twl6030: Add DTS file for twl6030 PMIC Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 09/12] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM Benoit Cousson
` (2 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add a dedicated DTS file for the twl4030/5030 Power + Audio IC.
This chip is a big SoC that will be reused in a lot of various
OMAP3 boards.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/twl4030.dtsi
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
new file mode 100644
index 0000000..8be5223
--- /dev/null
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+ compatible = "ti,twl4030";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ rtc {
+ compatible = "ti,twl4030-rtc";
+ interrupts = <11>;
+ };
+};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 09/12] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (7 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 08/12] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 10/12] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 11/12] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM Benoit Cousson
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Update pandaboard dts file with required clock frequencies
for the i2c client devices existing on pandaboard.
Add the twl6030 node in i2c1 controller.
This is the minimal support needed to boot OMAP4 boards
without any crash.
The support for all the features included in this MFD will be
added later.
Add a generic i2c EEPROM entry.
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
arch/arm/boot/dts/omap4-panda.dts | 34 ++++++++++++++++++++++++++++++++++
1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5..29646dc 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -18,3 +18,37 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in their EEPROM as EDID data.
+ * The EEPROM is connected as I2C slave device.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 10/12] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (8 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 09/12] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
2011-12-22 14:56 ` [PATCH v4 11/12] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM Benoit Cousson
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Update DTS file with required clock frequencies
for the i2c client devices existing on sdp4430.
Add the twl6030 node inside the i2c1 controller node.
This is the minimal support needed to boot OMAP4 boards
without any crash.
The support for all the features included in this MFD will be
added later.
Add the RTC submodule inside the twl node.
Add tmp105 temperature sensor in i2c3
Add bh1780 Ambient Light Sensor in i2c3
Add hmc5843 3-Axis Digital Compass in i2c4
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
arch/arm/boot/dts/omap4-sdp.dts | 53 +++++++++++++++++++++++++++++++++++++++
1 files changed, 53 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b..17e829a 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -18,3 +18,56 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+ reg = <0x48072000 0x100>, <0x48072100 0x100>, <0x48072200 0x100>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ };
+
+ /*
+ * Ambient Light Sensor
+ * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+ */
+ bh1780@29 {
+ compatible = "rohm,bh1780";
+ reg = <0x29>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ /*
+ * 3-Axis Digital Compass
+ * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+ */
+ hmc5843@1e {
+ compatible = "honeywell,hmc5843";
+ reg = <0x1e>;
+ };
+};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 11/12] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
[not found] ` <1324565806-31142-1-git-send-email-b-cousson-l0cyMroinI0@public.gmane.org>
` (9 preceding siblings ...)
2011-12-22 14:56 ` [PATCH v4 10/12] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices Benoit Cousson
@ 2011-12-22 14:56 ` Benoit Cousson
10 siblings, 0 replies; 17+ messages in thread
From: Benoit Cousson @ 2011-12-22 14:56 UTC (permalink / raw)
To: rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, tony-4v6yS6AI5VpBDgjK7y7TUQ
Cc: sameo-VuQAYsv1563Yd54FQh9/CA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
ben-linux-elnMNo+KYs3YtjvyW6yDsg,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add required clock frequencies for the i2c client devices existing
on beagle board.
Add the twl4030 basic description with only the twl_rtc module.
Add the EEPROM node.
Based on original patch from Manju:
http://www.spinics.net/lists/linux-omap/msg55831.html
Signed-off-by: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/omap3-beagle.dts | 29 +++++++++++++++++++++++++++++
1 files changed, 29 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 9f72cd4..714ba5d 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -18,3 +18,32 @@
reg = <0x80000000 0x20000000>; /* 512 MB */
};
};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 17+ messages in thread