Re: Pinmux bindings proposal V2

[Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>]

* Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> [120130 16:49]:
> On Mon, Jan 30, 2012 at 09:20:42AM -0800, Tony Lindgren wrote:
> > * Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> [120129 17:13]:
> > > On Fri, Jan 27, 2012 at 09:05:45AM -0800, Tony Lindgren wrote:
> ...
> > > > Wouldn't it be cleaner to just clk_get esdhc_clk during init, then
> > > > do clk_set_rate on it to toggle the rates?
> > > >  
> > > It's not an init-time switch but run-time one.  That said,
> > > sdhci_ops.set_clock will be called during run-time.
> > 
> > Right, basically you don't want to do clk_get or pinmux_get during
> > runtime, you do that once one during init. Then do clk_set_rate or
> > whaterver during runtime.
> > 
> > Is there anything stopping from implementing sdhci_ops.set_rate
> > using clock framework and clk_set_rate in this case BTW?
> >  
> We are doing this exactly for clk, and trying to figure out how to
> handle pinctrl here.  I do not see how we can do pinmux_get at
> init-time and pinmux_set_whatever at run-time.  The pinmux API does
> not work that way.

Hmm OK I see what you mean. Maybe we should have something like
pinmux_get/set_function to change the mux without having to do
pinmux_put and pinmux_get during runtime? As long as the locking is
per pin that should be safe to do.
 
> > > > > > So I'd rather stay out of random named states for
> > > > > > the pins coming from device tree; If we still need them, they should
> > > > > > be common bindings rather than things like "xyz_clock_hack".
> > > > > > 
> > > > > The binding defines the syntax, and I do not see the necessity to
> > > > > force the particular state name, which is really pinctrl client
> > > > > device specific.
> > > > 
> > > > Do you have some other custom pin state example other than the
> > > > clock rate change example above?
> > > > 
> > > I have another case PM related.  To aggressively save power, the pins
> > > configured for particular function during active mode need to be
> > > muxed on gpio mode and output 0 in low-power mode.
> > 
> > OK, but basically only a small subset of pins of the total pins?
> > 
> Actually, all pins used by the block.

That's still a fraction of the total pins on the SoC that need dynamic
remuxing, right?

Regards,

Tony