devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wolfram Sang <w.sang@pengutronix.de>
To: Karol Lewandowski <k.lewandowsk@samsung.com>
Cc: m.szyprowski@samsung.com, ben-linux@fluff.org,
	thomas.abraham@linaro.org, linux-kernel@vger.kernel.org,
	linux-i2c@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
	linux-samsung-soc@vger.kernel.org, t.stanislaws@samsung.com,
	kyungmin.park@samsung.com, broonie@opensource.wolfsonmicro.com
Subject: Re: [PATCH 1/2] i2c-s3c2410: Rework device type handling
Date: Mon, 23 Apr 2012 20:20:33 +0200	[thread overview]
Message-ID: <20120423182033.GB2767@pengutronix.de> (raw)
In-Reply-To: <1335198241-19344-2-git-send-email-k.lewandowsk@samsung.com>

[-- Attachment #1: Type: text/plain, Size: 5017 bytes --]

On Mon, Apr 23, 2012 at 06:24:00PM +0200, Karol Lewandowski wrote:
> Reorganize driver a bit to better handle device tree-based systems:
> 
>  - move machine type to driver's private structure instead of
>    quering platform device variants in runtime
> 
>  - replace s3c24xx_i2c_type enum with unsigned int that holds
>    bitmask with revision-specific quirks
> 
> Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  drivers/i2c/busses/i2c-s3c2410.c |   75 +++++++++++++++++---------------------
>  1 file changed, 34 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
> index 85e3664..23736ff 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -44,8 +44,10 @@
>  #include <plat/regs-iic.h>
>  #include <plat/iic.h>
>  
> -/* i2c controller state */
> +/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
> +#define QUIRK_S3C2440		(1 << 0)
>  
> +/* i2c controller state */
>  enum s3c24xx_i2c_state {
>  	STATE_IDLE,
>  	STATE_START,
> @@ -54,14 +56,10 @@ enum s3c24xx_i2c_state {
>  	STATE_STOP
>  };
>  
> -enum s3c24xx_i2c_type {
> -	TYPE_S3C2410,
> -	TYPE_S3C2440,
> -};
> -
>  struct s3c24xx_i2c {
>  	spinlock_t		lock;
>  	wait_queue_head_t	wait;
> +	unsigned int            quirks;
>  	unsigned int		suspended:1;
>  
>  	struct i2c_msg		*msg;
> @@ -88,26 +86,40 @@ struct s3c24xx_i2c {
>  #endif
>  };
>  
> -/* default platform data removed, dev should always carry data. */
> +static struct platform_device_id s3c24xx_driver_ids[] = {
> +	{
> +		.name		= "s3c2410-i2c",
> +		.driver_data	= 0,
> +	}, {
> +		.name		= "s3c2440-i2c",
> +		.driver_data	= QUIRK_S3C2440,
> +	}, { },
> +};
> +MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id s3c24xx_i2c_match[] = {
> +	{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
> +	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
> +#endif
>  
> -/* s3c24xx_i2c_is2440()
> +/* s3c24xx_get_device_quirks
>   *
> - * return true is this is an s3c2440
> + * Get controller type either from device tree or platform device variant.
>  */
>  
> -static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
> +static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pdev)
>  {
> -	struct platform_device *pdev = to_platform_device(i2c->dev);
> -	enum s3c24xx_i2c_type type;
> -
> -#ifdef CONFIG_OF
> -	if (i2c->dev->of_node)
> -		return of_device_is_compatible(i2c->dev->of_node,
> -				"samsung,s3c2440-i2c");
> -#endif
> +	if (pdev->dev.of_node) {
> +		const struct of_device_id *match;
> +		match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node);

I'd appreciate a comment explaining why match can't be NULL here (as to
my understanding, it can't). Or just check for it, but this way it looks
a bit fishy and people (hopefully ;)) will ask about it.

> +		return (unsigned int)match->data;
> +	}
>  
> -	type = platform_get_device_id(pdev)->driver_data;
> -	return type == TYPE_S3C2440;
> +	return platform_get_device_id(pdev)->driver_data;
>  }
>  
>  /* s3c24xx_i2c_master_complete
> @@ -676,7 +688,7 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
>  
>  	writel(iiccon, i2c->regs + S3C2410_IICCON);
>  
> -	if (s3c24xx_i2c_is2440(i2c)) {
> +	if (i2c->quirks & QUIRK_S3C2440) {
>  		unsigned long sda_delay;
>  
>  		if (pdata->sda_delay) {
> @@ -906,6 +918,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
>  		goto err_noclk;
>  	}
>  
> +	i2c->quirks = s3c24xx_get_device_quirks(pdev);
>  	if (pdata)
>  		memcpy(i2c->pdata, pdata, sizeof(*pdata));
>  	else
> @@ -1110,26 +1123,6 @@ static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
>  
>  /* device driver for platform bus bits */
>  
> -static struct platform_device_id s3c24xx_driver_ids[] = {
> -	{
> -		.name		= "s3c2410-i2c",
> -		.driver_data	= TYPE_S3C2410,
> -	}, {
> -		.name		= "s3c2440-i2c",
> -		.driver_data	= TYPE_S3C2440,
> -	}, { },
> -};
> -MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
> -
> -#ifdef CONFIG_OF
> -static const struct of_device_id s3c24xx_i2c_match[] = {
> -	{ .compatible = "samsung,s3c2410-i2c" },
> -	{ .compatible = "samsung,s3c2440-i2c" },
> -	{},
> -};
> -MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
> -#endif
> -
>  static struct platform_driver s3c24xx_i2c_driver = {
>  	.probe		= s3c24xx_i2c_probe,
>  	.remove		= s3c24xx_i2c_remove,

Rest is looking good, second patch, too.

Thanks,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

  reply	other threads:[~2012-04-23 18:20 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-23 16:23 [PATCH v4 0/2] i2c-s3c2410: Updates for exynos4210 and DT-based systems Karol Lewandowski
2012-04-23 16:24 ` [PATCH 1/2] i2c-s3c2410: Rework device type handling Karol Lewandowski
2012-04-23 18:20   ` Wolfram Sang [this message]
2012-04-24  8:40     ` Karol Lewandowski
2012-04-24 14:44       ` Wolfram Sang
     [not found]         ` <20120424144407.GA9007-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-04-25 11:38           ` Karol Lewandowski
     [not found] ` <1335198241-19344-1-git-send-email-k.lewandowsk-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2012-04-23 16:24   ` [PATCH 2/2] i2c-s3c2410: Add HDMIPHY quirk for S3C2440 Karol Lewandowski
  -- strict thread matches above, loose matches on Subject: below --
2012-03-09 17:04 [PATCH 0/2] i2c-s3c2410: Updates for exynos4210 and DT-based systems Karol Lewandowski
2012-03-09 17:04 ` [PATCH 1/2] i2c-s3c2410: Rework device type handling Karol Lewandowski
2012-03-12  5:58   ` Thomas Abraham
     [not found]     ` <CAJuYYwRDb-NvOzpzWtV8erw8UZeHjBUDUPjm-Cg0GTz6BCCV5w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2012-03-12 13:16       ` Karol Lewandowski
     [not found]         ` <4F5DF72F.4020009-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2012-03-12 14:21           ` Thomas Abraham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120423182033.GB2767@pengutronix.de \
    --to=w.sang@pengutronix.de \
    --cc=ben-linux@fluff.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=k.lewandowsk@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=t.stanislaws@samsung.com \
    --cc=thomas.abraham@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).