devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely@secretlab.ca>
To: David Daney <ddaney.cavm@gmail.com>,
	ralf@linux-mips.org, linux-mips@linux-mips.org,
	Linus Walleij <linus.walleij@stericsson.com>,
	Rob Herring <rob.herring@calxeda.com>,
	devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, David Daney <david.daney@cavium.com>
Subject: Re: [PATCH 2/2] gpio/MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins.
Date: Thu, 17 May 2012 14:50:44 -0600	[thread overview]
Message-ID: <20120517205044.81B1C3E0621@localhost> (raw)
In-Reply-To: <1334275820-7791-3-git-send-email-ddaney.cavm@gmail.com>

On Thu, 12 Apr 2012 17:10:20 -0700, David Daney <ddaney.cavm@gmail.com> wrote:
> From: David Daney <david.daney@cavium.com>
> 
> The SOCs in the OCTEON family have 16 (or in some cases 20) on-chip
> GPIO pins, this driver handles them all.  Configuring the pins as
> interrupt sources is handled elsewhere (OCTEON's irq handling code).
> 
> Signed-off-by: David Daney <david.daney@cavium.com>

Aside from the bugs already pointed out;

Acked-by: Grant Likely <grant.likely@secretlab.ca>

Will you merge this series via the MIPS tree, or do I need to pick it
up?

> ---
>  drivers/gpio/Kconfig       |    8 ++
>  drivers/gpio/Makefile      |    1 +
>  drivers/gpio/gpio-octeon.c |  166 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 175 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/gpio/gpio-octeon.c
> 
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index edadbda..d9d924c 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -136,6 +136,14 @@ config GPIO_MXS
>  	select GPIO_GENERIC
>  	select GENERIC_IRQ_CHIP
>  
> +config GPIO_OCTEON
> +	tristate "Cavium OCTEON GPIO"
> +	depends on GPIOLIB && CPU_CAVIUM_OCTEON
> +	default y
> +	help
> +	  Say yes here to support the on-chip GPIO lines on the OCTEON
> +	  family of SOCs.
> +
>  config GPIO_PL061
>  	bool "PrimeCell PL061 GPIO support"
>  	depends on ARM_AMBA
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 007f54b..ce0348c 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
>  obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
>  obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
>  obj-$(CONFIG_PLAT_NOMADIK)	+= gpio-nomadik.o
> +obj-$(CONFIG_GPIO_OCTEON)	+= gpio-octeon.o
>  obj-$(CONFIG_ARCH_OMAP)		+= gpio-omap.o
>  obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
>  obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
> diff --git a/drivers/gpio/gpio-octeon.c b/drivers/gpio/gpio-octeon.c
> new file mode 100644
> index 0000000..e679b44
> --- /dev/null
> +++ b/drivers/gpio/gpio-octeon.c
> @@ -0,0 +1,166 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2011,2012 Cavium Inc.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/gpio.h>
> +#include <linux/io.h>
> +
> +#include <asm/octeon/octeon.h>
> +#include <asm/octeon/cvmx-gpio-defs.h>
> +
> +#define DRV_VERSION "1.0"
> +#define DRV_DESCRIPTION "Cavium Inc. OCTEON GPIO Driver"
> +
> +#define RX_DAT 0x80
> +#define TX_SET 0x88
> +#define TX_CLEAR 0x90
> +/*
> + * The address offset of the GPIO configuration register for a given
> + * line.
> + */
> +static unsigned int bit_cfg_reg(unsigned int gpio)
> +{
> +	if (gpio < 16)
> +		return 8 * gpio;
> +	else
> +		return 8 * (gpio - 16) + 0x100;
> +}
> +
> +struct octeon_gpio {
> +	struct gpio_chip chip;
> +	u64 register_base;
> +};
> +
> +static int octeon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
> +
> +	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), 0);
> +	return 0;
> +}
> +
> +static void octeon_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> +{
> +	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
> +	u64 mask = 1ull << offset;
> +	u64 reg = gpio->register_base + (value ? TX_SET : TX_CLEAR);
> +	cvmx_write_csr(reg, mask);
> +}
> +
> +static int octeon_gpio_dir_out(struct gpio_chip *chip, unsigned offset,
> +			       int value)
> +{
> +	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
> +	union cvmx_gpio_bit_cfgx cfgx;
> +
> +
> +	octeon_gpio_set(chip, offset, value);
> +
> +	cfgx.u64 = 0;
> +	cfgx.s.tx_oe = 1;
> +
> +	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), cfgx.u64);
> +	return 0;
> +}
> +
> +static int octeon_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
> +	u64 read_bits = cvmx_read_csr(gpio->register_base + RX_DAT);
> +
> +	return ((1ull << offset) & read_bits) != 0;
> +}
> +
> +static int __init octeon_gpio_probe(struct platform_device *pdev)
> +{
> +	struct octeon_gpio *gpio;
> +	struct gpio_chip *chip;
> +	struct resource *res_mem;
> +	int err = 0;
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> +	if (!gpio)
> +		return -ENOMEM;
> +	chip = &gpio->chip;
> +
> +	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (res_mem == NULL) {
> +		dev_err(&pdev->dev, "found no memory resource\n");
> +		err = -ENXIO;
> +		goto out;
> +	}
> +	if (!devm_request_mem_region(&pdev->dev, res_mem->start,
> +					resource_size(res_mem),
> +				     res_mem->name)) {
> +		dev_err(&pdev->dev, "request_mem_region failed\n");
> +		err = -ENXIO;
> +		goto out;
> +	}
> +	gpio->register_base = (u64)devm_ioremap(&pdev->dev, res_mem->start,
> +						resource_size(res_mem));
> +
> +
> +	pdev->dev.platform_data = chip;
> +	chip->label = "octeon-gpio";
> +	chip->dev = &pdev->dev;
> +	chip->owner = THIS_MODULE;
> +	chip->base = 0;
> +	chip->can_sleep = 0;
> +
> +	if (OCTEON_IS_MODEL(OCTEON_CN66XX) ||
> +	    OCTEON_IS_MODEL(OCTEON_CN61XX) ||
> +	    OCTEON_IS_MODEL(OCTEON_CNF71XX))
> +		chip->ngpio = 20;
> +	else
> +		chip->ngpio = 16;
> +
> +	chip->direction_input = octeon_gpio_dir_in;
> +	chip->get = octeon_gpio_get;
> +	chip->direction_output = octeon_gpio_dir_out;
> +	chip->set = octeon_gpio_set;
> +	err = gpiochip_add(chip);
> +	if (err)
> +		goto out;
> +
> +	dev_info(&pdev->dev, "version: " DRV_VERSION "\n");
> +out:
> +	return err;
> +}
> +
> +static int __exit octeon_gpio_remove(struct platform_device *pdev)
> +{
> +	struct gpio_chip *chip = pdev->dev.platform_data;
> +	return gpiochip_remove(chip);
> +}
> +
> +static struct of_device_id octeon_gpio_match[] = {
> +	{
> +		.compatible = "cavium,octeon-3860-gpio",
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, octeon_mgmt_match);
> +
> +static struct platform_driver octeon_gpio_driver = {
> +	.driver = {
> +		.name		= "octeon_gpio",
> +		.owner		= THIS_MODULE,
> +		.of_match_table = octeon_gpio_match,
> +	},
> +	.probe		= octeon_gpio_probe,
> +	.remove		= __exit_p(octeon_gpio_remove),
> +};
> +
> +module_platform_driver(octeon_gpio_driver);
> +
> +MODULE_DESCRIPTION(DRV_DESCRIPTION);
> +MODULE_AUTHOR("David Daney");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION(DRV_VERSION);
> -- 
> 1.7.2.3
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.

  parent reply	other threads:[~2012-05-17 20:50 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-13  0:10 [PATCH 0/2] gpio/MIPS/OCTEON: Add GPIO support for OCTEON David Daney
     [not found] ` <1334275820-7791-1-git-send-email-ddaney.cavm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-04-13  0:10   ` [PATCH 1/2] MIPS: OCTEON: Select ARCH_REQUIRE_GPIOLIB David Daney
2012-04-13  0:10   ` [PATCH 2/2] gpio/MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins David Daney
2012-04-13  9:56     ` Florian Fainelli
2012-04-13 16:17       ` David Daney
2012-04-15 15:21         ` Florian Fainelli
2012-05-17 20:50     ` Grant Likely [this message]
2012-05-17 21:37       ` David Daney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120517205044.81B1C3E0621@localhost \
    --to=grant.likely@secretlab.ca \
    --cc=david.daney@cavium.com \
    --cc=ddaney.cavm@gmail.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linus.walleij@stericsson.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).