* [PATCH] ARM: at91: dt: evk-pro3: enable uart0 and uart2
@ 2012-10-23 10:00 Fabio Porcedda
[not found] ` <1350986416-16246-1-git-send-email-fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Fabio Porcedda @ 2012-10-23 10:00 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Nicolas Ferre,
Jean-Christophe PLAGNIOL-VILLARD, Andrew Victor
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/evk-pro3.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index ce959ee..96e50f5 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -22,6 +22,14 @@
status = "okay";
};
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart2: serial@fffb8000 {
+ status = "okay";
+ };
+
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
--
1.7.11.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: at91: dt: evk-pro3: enable uart0 and uart2
[not found] ` <1350986416-16246-1-git-send-email-fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2012-10-23 10:42 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <20121023104212.GD18964-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-23 10:42 UTC (permalink / raw)
To: Fabio Porcedda
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Andrew Victor,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Hi,
You will have to wait a few I prepare a patch series for pinctrl
so most of the current drivers will support pinctrl and requere it
this will availabe rc3 or rc4 max
then I will merge more update and boards
Best Regards,
J.
On 12:00 Tue 23 Oct , Fabio Porcedda wrote:
> Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> arch/arm/boot/dts/evk-pro3.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
> index ce959ee..96e50f5 100644
> --- a/arch/arm/boot/dts/evk-pro3.dts
> +++ b/arch/arm/boot/dts/evk-pro3.dts
> @@ -22,6 +22,14 @@
> status = "okay";
> };
>
> + usart0: serial@fffb0000 {
> + status = "okay";
> + };
> +
> + usart2: serial@fffb8000 {
> + status = "okay";
> + };
> +
> usb1: gadget@fffa4000 {
> atmel,vbus-gpio = <&pioC 5 0>;
> status = "okay";
> --
> 1.7.11.3
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: at91: dt: evk-pro3: enable uart0 and uart2
[not found] ` <20121023104212.GD18964-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
@ 2012-10-24 10:19 ` Fabio Porcedda
0 siblings, 0 replies; 3+ messages in thread
From: Fabio Porcedda @ 2012-10-24 10:19 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Andrew Victor,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Tue, Oct 23, 2012 at 12:42 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org> wrote:
> Hi,
>
> You will have to wait a few I prepare a patch series for pinctrl
>
> so most of the current drivers will support pinctrl and requere it
>
> this will availabe rc3 or rc4 max
>
> then I will merge more update and boards
Ok, i will wait.
Best regards
--
Fabio Porcedda
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-10-24 10:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-23 10:00 [PATCH] ARM: at91: dt: evk-pro3: enable uart0 and uart2 Fabio Porcedda
[not found] ` <1350986416-16246-1-git-send-email-fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-10-23 10:42 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <20121023104212.GD18964-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
2012-10-24 10:19 ` Fabio Porcedda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).