From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jason Gunthorpe Subject: Re: [PATCH] of: Have of_device_add call platform_device_add rather than device_add Date: Wed, 21 Nov 2012 11:14:30 -0700 Message-ID: <20121121181430.GE6406@obsidianresearch.com> References: <20121121072448.GG19837@obsidianresearch.com> <20121121155104.726B83E0AE2@localhost> <20121121174453.GD6406@obsidianresearch.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Grant Likely Cc: Linux Kernel Mailing List , Rob Herring , Greg Kroah-Hartman , devicetree-discuss List-Id: devicetree@vger.kernel.org On Wed, Nov 21, 2012 at 06:07:46PM +0000, Grant Likely wrote: > > Which is nesting the generic gpio driver under a larger region.. > > Try two sibling nodes with overlapping addresses. There are powerpc > device trees doing that even though it isn't legal by the ofw and > epapr specs. Both my examples were using sibling nodes in the OF tree. pex@e0000000 { device_type = "pci"; ranges = <0x02000000 0x00000000 0x00000000 0xe0000000 0x0 0x8000000>; bus-range = <0x0 0xFF>; chip@0 { ranges = <0x02000000 0x00000000 0x00000000 0x02000000 0x00000000 0x00000000 0x0 0x8000000>; chip_control@0 { compatible = "orc,chip,control"; assigned-addresses = <0x02000000 0x0 0x0 0x0 4096>; }; gpio3: chip_gpio@8 { #gpio-cells = <2>; compatible = "linux,basic-mmio-gpio"; gpio-controller; reg-names = "dat", "set", "dirin"; assigned-addresses = <0x02000000 0x0 0x8 0x0 4>, <0x02000000 0x0 0xc 0x0 4>, <0x02000000 0x0 0x10 0x0 4>; }; Non-conformant yes, but it is the simplest way to get linux to bind two drivers to the same memory space. Jason