From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grant Likely Subject: Re: [PATCH] of: Have of_device_add call platform_device_add rather than device_add Date: Thu, 22 Nov 2012 15:36:21 +0000 Message-ID: <20121122153621.452CA3E129E@localhost> References: <20121121072448.GG19837@obsidianresearch.com> <20121121155104.726B83E0AE2@localhost> <20121121174453.GD6406@obsidianresearch.com> <20121121181430.GE6406@obsidianresearch.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20121121181430.GE6406-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: Jason Gunthorpe Cc: Greg Kroah-Hartman , devicetree-discuss , Linux Kernel Mailing List , Rob Herring List-Id: devicetree@vger.kernel.org On Wed, 21 Nov 2012 11:14:30 -0700, Jason Gunthorpe wrote: > On Wed, Nov 21, 2012 at 06:07:46PM +0000, Grant Likely wrote: > > > > Which is nesting the generic gpio driver under a larger region.. > > > > Try two sibling nodes with overlapping addresses. There are powerpc > > device trees doing that even though it isn't legal by the ofw and > > epapr specs. > > Both my examples were using sibling nodes in the OF tree. > > pex@e0000000 { > device_type = "pci"; > ranges = <0x02000000 0x00000000 0x00000000 0xe0000000 0x0 0x8000000>; > bus-range = <0x0 0xFF>; > chip@0 { > ranges = <0x02000000 0x00000000 0x00000000 0x02000000 0x00000000 0x00000000 0x0 0x8000000>; > chip_control@0 { > compatible = "orc,chip,control"; > assigned-addresses = <0x02000000 0x0 0x0 0x0 4096>; > }; > > gpio3: chip_gpio@8 { > #gpio-cells = <2>; > compatible = "linux,basic-mmio-gpio"; > gpio-controller; > reg-names = "dat", "set", "dirin"; > assigned-addresses = <0x02000000 0x0 0x8 0x0 4>, > <0x02000000 0x0 0xc 0x0 4>, > <0x02000000 0x0 0x10 0x0 4>; > }; > > Non-conformant yes, but it is the simplest way to get linux to bind > two drivers to the same memory space. Hmm... I've not tried it with assigned-address. I tried with two sibling platform devices using just the 'reg' property. That the kernel will complain about. For powerpc-only, the patch I posted allows the device to get registered anyway even though the range incorrectly overlaps. g.