From: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: Michael Grzeschik <m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: Re: [PATCH v3 7/7] usb: chipidea: usbmisc: add post handling and errata fix for mx25
Date: Fri, 23 Nov 2012 14:59:38 +0800 [thread overview]
Message-ID: <20121123065937.GE22420@nchen-desktop> (raw)
In-Reply-To: <1353506793-8354-8-git-send-email-m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
On Wed, Nov 21, 2012 at 03:06:33PM +0100, Michael Grzeschik wrote:
> This adds a post handling routine which is called after
> ci13xxx_add_device was called. The first user is the mx25, which has to
> disable the external-vbus-divider after the ude has started.
udc has started?
>
>
> +static int usbmisc_imx25_post(struct device *dev)
> +{
> + struct usbmisc_usb_device *usbdev;
> + void __iomem *reg;
> + unsigned long flags;
> + u32 val;
> +
> + usbdev = get_usbdev(dev);
> + if (IS_ERR(usbdev))
> + return PTR_ERR(usbdev);
> +
> + reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
> +
> + if (usbdev->evdo) {
> + spin_lock_irqsave(&usbmisc->lock, flags);
> + val = readl(reg);
> + writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg);
> + spin_unlock_irqrestore(&usbmisc->lock, flags);
> + mdelay(5); /* needed to stabilize voltage */
better use usleep_range to avoid busy-wait.
> + }
> +
> + return 0;
> +}
> +
> static int usbmisc_imx53_init(struct device *dev)
> {
> struct usbmisc_usb_device *usbdev;
> @@ -122,6 +150,10 @@ static int usbmisc_imx6q_init(struct device *dev)
> return 0;
> }
>
> +static const struct usbmisc_ops imx25_usbmisc_ops = {
> + .post = usbmisc_imx25_post,
> +};
> +
> static const struct usbmisc_ops imx53_usbmisc_ops = {
> .init = usbmisc_imx53_init,
> };
> @@ -131,6 +163,7 @@ static const struct usbmisc_ops imx6q_usbmisc_ops = {
> };
>
> static const struct of_device_id usbmisc_imx_dt_ids[] = {
> + { .compatible = "fsl,imx25-usbmisc", .data = (void *)&imx25_usbmisc_ops },
> { .compatible = "fsl,imx53-usbmisc", .data = (void *)&imx53_usbmisc_ops },
> { .compatible = "fsl,imx6q-usbmisc", .data = (void *)&imx6q_usbmisc_ops },
> { /* sentinel */ }
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-11-23 6:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-21 14:06 [PATCH v3 0/7] support other fsl SoCs with usbmisc + small fixes Michael Grzeschik
[not found] ` <1353506793-8354-1-git-send-email-m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-21 14:06 ` [PATCH v3 1/7] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx Michael Grzeschik
2012-11-21 14:06 ` [PATCH v3 2/7] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove Michael Grzeschik
2012-11-21 14:06 ` [PATCH v3 3/7] usb: chipidea: usbmisc: fix a potential race condition Michael Grzeschik
[not found] ` <1353506793-8354-4-git-send-email-m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-23 5:36 ` Peter Chen
2012-11-23 7:37 ` Sascha Hauer
[not found] ` <20121123073711.GJ10369-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-23 9:01 ` Alexander Shishkin
2012-11-23 10:00 ` Marc Kleine-Budde
2012-11-21 14:06 ` [PATCH v3 4/7] usb: chipidea: usbmisc: prepare driver to handle more than one soc Michael Grzeschik
2012-11-21 14:06 ` [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock Michael Grzeschik
[not found] ` <1353506793-8354-6-git-send-email-m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-23 6:51 ` Peter Chen
2012-11-23 16:20 ` Michael Grzeschik
[not found] ` <20121123162051.GA31008-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-25 9:18 ` Peter Chen
2012-11-26 15:44 ` Michael Grzeschik
2012-11-21 14:06 ` [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support Michael Grzeschik
[not found] ` <1353506793-8354-7-git-send-email-m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-21 20:28 ` Sergei Shtylyov
[not found] ` <50AD3974.4000608-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2012-11-21 19:58 ` Michael Grzeschik
2012-11-23 6:53 ` Peter Chen
2012-11-23 7:39 ` Sascha Hauer
[not found] ` <20121123073939.GK10369-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-25 8:05 ` Peter Chen
2012-11-23 10:02 ` Marc Kleine-Budde
[not found] ` <50AF49A5.6030708-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-25 8:09 ` Peter Chen
2012-11-26 15:40 ` Grant Likely
2012-11-21 14:06 ` [PATCH v3 7/7] usb: chipidea: usbmisc: add post handling and errata fix for mx25 Michael Grzeschik
[not found] ` <1353506793-8354-8-git-send-email-m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-23 6:59 ` Peter Chen [this message]
2012-11-22 9:24 ` [PATCH v3 0/7] support other fsl SoCs with usbmisc + small fixes Alexander Shishkin
2012-11-22 9:31 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121123065937.GE22420@nchen-desktop \
--to=peter.chen-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).