From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Grzeschik Subject: Re: [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock Date: Mon, 26 Nov 2012 16:44:13 +0100 Message-ID: <20121126154413.GB31008@pengutronix.de> References: <1353506793-8354-1-git-send-email-m.grzeschik@pengutronix.de> <1353506793-8354-6-git-send-email-m.grzeschik@pengutronix.de> <20121123065115.GC22420@nchen-desktop> <20121123162051.GA31008@pengutronix.de> <20121125091834.GA16661@nchen-desktop> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20121125091834.GA16661@nchen-desktop> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Peter Chen Cc: Michael Grzeschik , linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org List-Id: devicetree@vger.kernel.org On Sun, Nov 25, 2012 at 05:18:35PM +0800, Peter Chen wrote: > On Fri, Nov 23, 2012 at 05:20:51PM +0100, Michael Grzeschik wrote: > > > usbphy: used to transfer data > > > (like your per) > > > > The "per" clk is a different clk than the usbphy. We have an usbphy clk > > aswell on the mx5x. As discussed before [1], we need a solution to enable > > the usbphy clk. The current approach is to let the nop-xceiver enable > > this. > > > > [1] http://www.spinics.net/lists/linux-usb/msg74489.html > It does not matter which the name is, this clock is related to usb 480M or > its source. We use nop-xceiver is just to create struct usb_otg > and usb_phy. Clock information can be at imx specific file like > cil13xxx_imx. I think the clock task needs to become a sepreate topic, apart from this series. > > > > > mx6q: > > > - usboh3(Index 162 at DT), used to access register > > > - usbphy(Index 182 for otg port at DT), at phy controller > > > > > So, we may consider a way to consolidate both mx6q (mx28) and mxc (mx5x, mx3x) > > > platforms. > > > > Yes, we will discuss a real clktree solution in the usbmisc driver for > > the different cores. The first thoughts are, that the clk configuration > > has completely to be done inside the usbmisc driver. For this, the > > usbmisc needs to become a hard dependency for the ci13xxx_imx glue code. > > For my mind, imx usb clock handling is better only at place, that is > cil13xxx_imx. We can have imx_clk_enable and imx_clk_disable in it, > and handling clk in imx_clk_enable using id_table or what else platform > specific. As already mentioned, the clock layout differs from SoC to SoC. Therefore the usbmisc can become a mandatory instance over the ci13xxx_imx instances in all imx cases. This controlling interface can define the special clock setups and connection types for the underlying usb cores. I will send the next series without this clock handling. Regards, Michael -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html