From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Subject: Re: [PATCH v2 2/3] arm: mvebu: Enable USB controllers on Armada 370/XP boards Date: Wed, 23 Jan 2013 19:03:52 +0100 Message-ID: <20130123190352.2d001218@skate> References: <1358954792-16160-1-git-send-email-ezequiel.garcia@free-electrons.com> <1358954792-16160-2-git-send-email-ezequiel.garcia@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Ezequiel Garcia Cc: Nobuhiro Iwamatsu , linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Jason Cooper , Florian Fainelli , Lior Amsalem , Andrew Lunn , Arnd Bergmann , Michael Opdenacker , Yehuda Yitschak , Gregory CLEMENT , Ezequiel Garcia List-Id: devicetree@vger.kernel.org Dear Ezequiel Garcia, On Wed, 23 Jan 2013 14:04:42 -0300, Ezequiel Garcia wrote: > from the OpenBlocks AX3-4 board dts file, since you mentioned this > board uses that USB > port for a PCIe connector -- if I understood correctly. No. The OpenBlocks has a different USB controller that sits on the PCIe bus. There is nothing like a PCIe port that uses a USB port, that doesn't make sense. > So, IMHO, if OpenBlocks uses third USB port to connect some PCIe > controller, we should activate it in the dts file. > > What do you think? No, see above. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html