From: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
To: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Daniel Kurtz <djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
"linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Wolfram Sang <wolfram-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Ben Dooks <ben.dooks-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>,
u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
Alexandre Courbot
<acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
"Ben Dooks (embedded platforms)"
<ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>,
Girish Shivananjappa
<girish.shivananjappa-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"bhushan.r" <bhushan.r-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Naveen Krishna Chatradhi
<ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
"sreekumar.c"
<sreekumar.c-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Peter Korsgaard
<peter.korsgaard-ob4gmnvZ1/cAvxtiuMwx3w@public.gmane.org>,
Yuvaraj Kumar
<yuvaraj.cd-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH v1 1/4] i2c: mux: Add i2c-arbitrator 'mux' driver
Date: Fri, 15 Feb 2013 10:26:55 +0000 [thread overview]
Message-ID: <20130215102655.GB22283@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <CAD=FV=USf_YSzW1ZN2NWZKnLk_LPpnFpxRy=AGVyn_YHjRpKyw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
[-- Attachment #1.1: Type: text/plain, Size: 454 bytes --]
On Thu, Feb 14, 2013 at 05:14:35PM -0800, Doug Anderson wrote:
> The regulator_get() calls are before regulator_init_complete() by
> quite a margin. The regulator_init_complete() is a late_initcall, so
> that's not too surprising. Are we not supposed to access regulators
> until after late_init()? That seems like quite a limitation...
No, they should work fine at all points (the worst that'll happen is
that you might get a few extra deferrals).
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 192 bytes --]
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
next prev parent reply other threads:[~2013-02-15 10:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-13 18:02 [PATCH v1 1/4] i2c: mux: Add i2c-arbitrator 'mux' driver Doug Anderson
[not found] ` <1360778532-7480-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2013-02-13 18:45 ` Olof Johansson
2013-02-13 18:49 ` Olof Johansson
2013-02-13 21:02 ` Stephen Warren
[not found] ` <511BFF77.2090202-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-14 0:34 ` Doug Anderson
[not found] ` <CAD=FV=XUEcUx3NGCm+KijRGujECVTSJ9X5fY=arq-4U_RUdxCQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-02-14 0:41 ` Stephen Warren
[not found] ` <511C32B5.20600-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-14 0:54 ` Doug Anderson
[not found] ` <CAD=FV=X=BPQo245kAtPvNUgKjypOYnheYJWcBkq6AA19z99V0w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-02-14 21:40 ` Doug Anderson
[not found] ` <CAD=FV=UYEqreNbUAxHydmWH+66pOORMB_uFokivLitsavzTcsQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-02-14 23:35 ` Stephen Warren
[not found] ` <511D74DD.9070600-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-14 23:59 ` Doug Anderson
[not found] ` <CAD=FV=Uri9O=iuuUKB9nPKW+6C+A_WsqW0sXB2nS5i7+=NtFKA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-02-15 0:16 ` Stephen Warren
[not found] ` <511D7E5D.1030003-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-15 1:14 ` Doug Anderson
[not found] ` <CAD=FV=USf_YSzW1ZN2NWZKnLk_LPpnFpxRy=AGVyn_YHjRpKyw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-02-15 10:26 ` Mark Brown [this message]
2013-02-15 10:24 ` Mark Brown
[not found] ` <20130215102420.GA22283-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2013-02-15 19:56 ` Linus Walleij
[not found] ` <CACRpkdav8WO5yOSLPLtpUCeM41nttrbspRb7YrsqGXJ01ebMhw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-02-17 16:03 ` Mark Brown
2013-02-15 21:05 ` Doug Anderson
2013-02-14 10:01 ` Linus Walleij
[not found] ` <CACRpkdaUtOe9g7+T=cWPepeGae6RcJ1nTeGc9opTijcYzfMedQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-02-14 17:37 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130215102655.GB22283@opensource.wolfsonmicro.com \
--to=broonie-yzvpicuk2aatku/dhu1wvuem+bqzidxxqq4iyu8u01e@public.gmane.org \
--cc=acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=ben.dooks-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org \
--cc=bhushan.r-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=girish.shivananjappa-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=peter.korsgaard-ob4gmnvZ1/cAvxtiuMwx3w@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=sreekumar.c-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=wolfram-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
--cc=yuvaraj.cd-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).