From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Porter Subject: Re: [PATCH 3/5] ARM: dts: AM33XX: Fix gpio numbering to match hardware/TRM Date: Wed, 27 Mar 2013 10:11:55 -0400 Message-ID: <20130327141155.GK18335@beef> References: <1364389156-8273-1-git-send-email-hvaibhav@ti.com> <1364389156-8273-4-git-send-email-hvaibhav@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1364389156-8273-4-git-send-email-hvaibhav@ti.com> Sender: linux-omap-owner@vger.kernel.org To: Vaibhav Hiremath Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, b-cousson@ti.com, devicetree-discuss@lists.ozlabs.org List-Id: devicetree@vger.kernel.org On Wed, Mar 27, 2013 at 06:29:14PM +0530, Vaibhav Hiremath wrote: > With DT support, where naming convention is based on base-addr > and not id, so we should follow TRM/Spec numbering label. > > This patch changes GPIO numbering as per TRM, as gpio0-3. > > Matt Porter had submitted base patch sometime back but it > didn't make it to the mainline - > https://patchwork.kernel.org/patch/1433001/ > > Later DT nodes for gpio based keypad and led driver got > merged, so this fix needs to propagate to board dts files > as well. > > Signed-off-by: Vaibhav Hiremath > Signed-off-by: Matt Porter > Cc: Benoit Cousson Thanks for picking this up, Vaibhav. It'll eliminate all the pain people have with the DT not matching the TRM. -Matt