[PATCH 0/3] add pin-mux configuration for AM33xx CPSW

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/3] add pin-mux configuration for AM33xx CPSW
@ 2013-03-25  7:27 Mugunthan V N
  2013-03-25  7:27 ` [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone Mugunthan V N
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Mugunthan V N @ 2013-03-25  7:27 UTC (permalink / raw)
  To: linux-omap
  Cc: devicetree-discuss, b-cousson, benoit.cousson, tony,
	Mugunthan V N

Adding pinmux configuration to AM33xx board dts file.

Mugunthan V N (3):
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM

 arch/arm/boot/dts/am335x-bone.dts  |   25 +++++++++++++++++++++++-
 arch/arm/boot/dts/am335x-evm.dts   |   24 ++++++++++++++++++++++-
 arch/arm/boot/dts/am335x-evmsk.dts |   38 +++++++++++++++++++++++++++++++++++-
 3 files changed, 84 insertions(+), 3 deletions(-)

-- 
1.7.9.5


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  2013-03-25  7:27 [PATCH 0/3] add pin-mux configuration for AM33xx CPSW Mugunthan V N
@ 2013-03-25  7:27 ` Mugunthan V N
  2013-04-01 10:45   ` Jan Luebbe
  2013-03-25  7:27 ` [PATCH 2/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk Mugunthan V N
  2013-03-25  7:27 ` [PATCH 3/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM Mugunthan V N
  2 siblings, 1 reply; 6+ messages in thread
From: Mugunthan V N @ 2013-03-25  7:27 UTC (permalink / raw)
  To: linux-omap
  Cc: devicetree-discuss, b-cousson, benoit.cousson, tony,
	Mugunthan V N

Add pinmux configurations for MII based CPSW ethernet to am335x-bone.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.

Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |   25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 11b240c..f90e665 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -26,7 +26,7 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
+		pinctrl-0 = <&user_leds_s0 &cpsw_s0>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
@@ -36,6 +36,29 @@
 				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
 			>;
 		};
+
+		cpsw_s0: cpsw_s0 {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x110 0x20	/* mii1_rxerr.mii1_rxerr, MODE0 | INPUT */
+				0x114 0x0	/* mii1_txen.mii1_txen, MODE0 | OUTPUT */
+				0x118 0x20	/* mii1_rxdv.mii1_rxdv, MODE0 | INPUT_PULLDOWN */
+				0x11c 0x0	/* mii1_txd3.mii1_txd3, MODE0 | OUTPUT */
+				0x120 0x0	/* mii1_txd2.mii1_txd2, MODE0 | OUTPUT */
+				0x124 0x0	/* mii1_txd1.mii1_txd1, MODE0 | OUTPUT */
+				0x128 0x0	/* mii1_txd0.mii1_txd0, MODE0 | OUTPUT */
+				0x12c 0x20	/* mii1_txclk.mii1_txclk, MODE0 | INPUT_PULLDOWN */
+				0x130 0x20	/* mii1_rxclk.mii1_rxclk, MODE0 | INPUT_PULLDOWN */
+				0x134 0x20	/* mii1_rxd3.mii1_rxd3, MODE0 | INPUT_PULLDOWN */
+				0x138 0x20	/* mii1_rxd2.mii1_rxd2, MODE0 | INPUT_PULLDOWN */
+				0x13c 0x20	/* mii1_rxd1.mii1_rxd1, MODE0 | INPUT_PULLDOWN */
+				0x140 0x20	/* mii1_rxd0.mii1_rxd0, MODE0 | INPUT_PULLDOWN */
+
+				/* MDIO */
+				0x148 0x30	/* mdio_data.mdio_data, MODE0 | INPUT_PULLUP */
+				0x14c 0x10	/* mdio_clk.mdio_clk, MODE0 | OUTPUT_PULLUP */
+			>;
+		};
 	};
 
 	ocp {
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  2013-03-25  7:27 ` [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone Mugunthan V N
@ 2013-04-01 10:45   ` Jan Luebbe
  0 siblings, 0 replies; 6+ messages in thread
From: Jan Luebbe @ 2013-04-01 10:45 UTC (permalink / raw)
  To: Mugunthan V N
  Cc: linux-omap, devicetree-discuss, b-cousson, benoit.cousson, tony

On Mon, Mar 25, 2013 at 12:57:56PM +0530, Mugunthan V N wrote:
>  	am33xx_pinmux: pinmux@44e10800 {
>  		pinctrl-names = "default";
> -		pinctrl-0 = <&user_leds_s0>;
> +		pinctrl-0 = <&user_leds_s0 &cpsw_s0>;

Why do you add &cpsw_s0 to the pinmux node? This should go into the cpsw
node itself, which should work without further code changes since:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ab78029ecc347
(drivers/pinctrl: grab default handles from device core)

Same for the other patches.

Regards,
Jan

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 2/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  2013-03-25  7:27 [PATCH 0/3] add pin-mux configuration for AM33xx CPSW Mugunthan V N
  2013-03-25  7:27 ` [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone Mugunthan V N
@ 2013-03-25  7:27 ` Mugunthan V N
  2013-03-25  7:27 ` [PATCH 3/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM Mugunthan V N
  2 siblings, 0 replies; 6+ messages in thread
From: Mugunthan V N @ 2013-03-25  7:27 UTC (permalink / raw)
  To: linux-omap
  Cc: devicetree-discuss, b-cousson, benoit.cousson, tony,
	Mugunthan V N

Add pinmux configurations for RGMII based CPSW ethernet to am335x-evmsk.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.

Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts |   38 +++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index f297b85..9b29ad4 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -32,7 +32,7 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0 &cpsw_s0>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
@@ -51,6 +51,42 @@
 				0x9c 0x27	/* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
 			>;
 		};
+
+		cpsw_s0: cpsw_s0 {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x114 0x2	/* mii1_txen.rgmii1_tctl, MODE2 | OUTPUT */
+				0x118 0x22	/* mii1_rxdv.rgmii1_rctl, MODE2 | INPUT_PULLDOWN */
+				0x11c 0x2	/* mii1_txd3.rgmii1_td3, MODE2 | OUTPUT */
+				0x120 0x2	/* mii1_txd2.rgmii1_td2, MODE2 | OUTPUT */
+				0x124 0x2	/* mii1_txd1.rgmii1_td1, MODE2 | OUTPUT */
+				0x128 0x2	/* mii1_txd0.rgmii1_td0, MODE2 | OUTPUT */
+				0x12c 0x2	/* mii1_txclk.rgmii1_tclk, MODE2 | OUTPUT */
+				0x130 0x22	/* mii1_rxclk.rgmii1_rclk, MODE2 | INPUT_PULLDOWN */
+				0x134 0x22	/* mii1_rxd3.rgmii1_rd3, MODE2 | INPUT_PULLDOWN */
+				0x138 0x22	/* mii1_rxd2.rgmii1_rd2, MODE2 | INPUT_PULLDOWN */
+				0x13c 0x22	/* mii1_rxd1.rgmii1_rd1, MODE2 | INPUT_PULLDOWN */
+				0x140 0x22	/* mii1_rxd0.rgmii1_rd0, MODE2 | INPUT_PULLDOWN */
+
+				/* Slave 2 */
+				0x40 0x2	/* gpmc_a0.rgmii2_tctl", MODE2 | OUTPUT */
+				0x44 0x22	/* gpmc_a1.rgmii2_rctl", MODE2 | INPUT_PULLDOWN */
+				0x48 0x2	/* gpmc_a2.rgmii2_td3", MODE2 | OUTPUT */
+				0x4c 0x2	/* gpmc_a3.rgmii2_td2", MODE2 | OUTPUT */
+				0x50 0x2	/* gpmc_a4.rgmii2_td1", MODE2 | OUTPUT */
+				0x54 0x2	/* gpmc_a5.rgmii2_td0", MODE2 | OUTPUT */
+				0x58 0x2	/* gpmc_a6.rgmii2_tclk", MODE2 | OUTPUT */
+				0x5c 0x22	/* gpmc_a7.rgmii2_rclk", MODE2 | INPUT_PULLDOWN */
+				0x60 0x22	/* gpmc_a8.rgmii2_rd3", MODE2 | INPUT_PULLDOWN */
+				0x64 0x22	/* gpmc_a9.rgmii2_rd2", MODE2 | INPUT_PULLDOWN */
+				0x68 0x22	/* gpmc_a10.rgmii2_rd1", MODE2 | INPUT_PULLDOWN */
+				0x6c 0x22	/* gpmc_a11.rgmii2_rd0", MODE2 | INPUT_PULLDOWN */
+
+				/* MDIO */
+				0x148 0x30	/* mdio_data.mdio_data, MODE0 | INPUT_PULLUP */
+				0x14c 0x10	/* mdio_clk.mdio_clk, MODE0 | OUTPUT_PULLUP */
+			>;
+		};
 	};
 
 	ocp {
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH 3/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  2013-03-25  7:27 [PATCH 0/3] add pin-mux configuration for AM33xx CPSW Mugunthan V N
  2013-03-25  7:27 ` [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone Mugunthan V N
  2013-03-25  7:27 ` [PATCH 2/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk Mugunthan V N
@ 2013-03-25  7:27 ` Mugunthan V N
  2 siblings, 0 replies; 6+ messages in thread
From: Mugunthan V N @ 2013-03-25  7:27 UTC (permalink / raw)
  To: linux-omap
  Cc: devicetree-discuss, b-cousson, benoit.cousson, tony,
	Mugunthan V N

Add pinmux configurations for RGMII based CPSW ethernet to am335x-evm.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.

Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts |   24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d649644..9327d7d 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -26,7 +26,7 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &cpsw_s0>;
 
 		matrix_keypad_s0: matrix_keypad_s0 {
 			pinctrl-single,pins = <
@@ -44,6 +44,28 @@
 				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
 			>;
 		};
+
+		cpsw_s0: cpsw_s0 {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x114 0x2	/* mii1_txen.rgmii1_tctl, MODE2 | OUTPUT */
+				0x118 0x22	/* mii1_rxdv.rgmii1_rctl, MODE2 | INPUT_PULLDOWN */
+				0x11c 0x2	/* mii1_txd3.rgmii1_td3, MODE2 | OUTPUT */
+				0x120 0x2	/* mii1_txd2.rgmii1_td2, MODE2 | OUTPUT */
+				0x124 0x2	/* mii1_txd1.rgmii1_td1, MODE2 | OUTPUT */
+				0x128 0x2	/* mii1_txd0.rgmii1_td0, MODE2 | OUTPUT */
+				0x12c 0x2	/* mii1_txclk.rgmii1_tclk, MODE2 | OUTPUT */
+				0x130 0x22	/* mii1_rxclk.rgmii1_rclk, MODE2 | INPUT_PULLDOWN */
+				0x134 0x22	/* mii1_rxd3.rgmii1_rd3, MODE2 | INPUT_PULLDOWN */
+				0x138 0x22	/* mii1_rxd2.rgmii1_rd2, MODE2 | INPUT_PULLDOWN */
+				0x13c 0x22	/* mii1_rxd1.rgmii1_rd1, MODE2 | INPUT_PULLDOWN */
+				0x140 0x22	/* mii1_rxd0.rgmii1_rd0, MODE2 | INPUT_PULLDOWN */
+
+				/* MDIO */
+				0x148 0x30	/* mdio_data.mdio_data, MODE0 | INPUT_PULLUP */
+				0x14c 0x10	/* mdio_clk.mdio_clk, MODE0 | OUTPUT_PULLUP */
+			>;
+		};
 	};
 
 	ocp {
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH 0/3] Add pinmux DT nodes to CPSW for AM335x
@ 2013-06-07 11:32 Mugunthan V N
  2013-06-07 11:32 ` [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone Mugunthan V N
  0 siblings, 1 reply; 6+ messages in thread
From: Mugunthan V N @ 2013-06-07 11:32 UTC (permalink / raw)
  To: benoit.cousson
  Cc: tony, Mugunthan V N, devicetree-discuss, linux-omap,
	linux-arm-kernel

Add pinmux DT nodes to CPSW for the following AM335x boards
* AM335x Beaglebone
* AM335x EVM
* AM335x EVMsk
default state contains the pinmux required for active mode and
sleep mode contains pinmux reset values for energy saving.

Mugunthan V N (3):
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM

 arch/arm/boot/dts/am335x-bone.dts  |   67 ++++++++++++++++++++++++++
 arch/arm/boot/dts/am335x-evm.dts   |   64 +++++++++++++++++++++++++
 arch/arm/boot/dts/am335x-evmsk.dts |   92 ++++++++++++++++++++++++++++++++++++
 3 files changed, 223 insertions(+)

-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  2013-06-07 11:32 [PATCH 0/3] Add pinmux DT nodes to CPSW for AM335x Mugunthan V N
@ 2013-06-07 11:32 ` Mugunthan V N
  0 siblings, 0 replies; 6+ messages in thread
From: Mugunthan V N @ 2013-06-07 11:32 UTC (permalink / raw)
  To: benoit.cousson
  Cc: devicetree-discuss, linux-omap, linux-arm-kernel, tony,
	Mugunthan V N

Add pinmux configurations for MII based CPSW ethernet to am335x-bone.

Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.

Sleep mode is nothing but the values required for the module during
inactive state. The pins are configured to its reset state to optimize
energy usage for the pins for the suspend/resume cycle

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |   67 +++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index fd48173..04feaf8 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -56,6 +56,60 @@
 				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 			>;
 		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
 	};
 
 	ocp {
@@ -165,3 +219,16 @@
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
 };
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2013-06-07 11:32 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-25  7:27 [PATCH 0/3] add pin-mux configuration for AM33xx CPSW Mugunthan V N
2013-03-25  7:27 ` [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone Mugunthan V N
2013-04-01 10:45   ` Jan Luebbe
2013-03-25  7:27 ` [PATCH 2/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk Mugunthan V N
2013-03-25  7:27 ` [PATCH 3/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM Mugunthan V N
  -- strict thread matches above, loose matches on Subject: below --
2013-06-07 11:32 [PATCH 0/3] Add pinmux DT nodes to CPSW for AM335x Mugunthan V N
2013-06-07 11:32 ` [PATCH 1/3] ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone Mugunthan V N

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).