From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sascha Hauer Subject: Re: [PATCH 6/7] usb: chipidea: udc: add force-full-speed option Date: Sat, 1 Jun 2013 09:39:33 +0200 Message-ID: <20130601073933.GK32299@pengutronix.de> References: <1370025529-7414-1-git-send-email-mgr@pengutronix.de> <1370025529-7414-7-git-send-email-mgr@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1370025529-7414-7-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Michael Grzeschik Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, balbi-l0cyMroinI0@public.gmane.org, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, Michael Grzeschik List-Id: devicetree@vger.kernel.org On Fri, May 31, 2013 at 08:38:48PM +0200, Michael Grzeschik wrote: > From: Michael Grzeschik > > This patch makes it possible to set the chipidea udc > into full-speed only mode. It can be set by the oftree > property "force-full-speed". [...] > +/* force full-speed operation */ > +static bool full_speed; > +module_param(full_speed, bool, 0444); > +MODULE_PARM_DESC(full_speed, "force full-speed mode"); > + ??? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html