From: "Heiko Stübner" <heiko@sntech.de>
To: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Seungwon Jeon <tgih.jun@samsung.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Chris Ball <cjb@laptop.org>,
linux-mmc@vger.kernel.org, Grant Likely <grant.likely@linaro.org>,
Rob Herring <rob.herring@calxeda.com>,
Linus Walleij <linus.walleij@linaro.org>,
devicetree-discuss@lists.ozlabs.org,
Russell King <linux@arm.linux.org.uk>,
Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: [PATCH v2 0/8] arm: add basic support for Rockchip Cortex-A9 SoCs
Date: Thu, 6 Jun 2013 21:07:58 +0200 [thread overview]
Message-ID: <201306062107.58875.heiko@sntech.de> (raw)
Second version of basic Rockchip A9 support.
Changes since v1:
- addressed Linus Walleij's comments to the pinctrl driver, including the
move to generic pinconfig (hopefully I did catch all)
- renamed the clocks to use the SoC name of the initial user
as suggested by Olof Johansson
- fixed the uart address, found by Arnd Bergmann
- address Arnd's comments on the board file (use of_clk_init and friends,
remove map_io, use real soc names)
- removed Makefile.boot as suggested by Thomas Petazzoni
Dependencies:
- the irqdomain support for the generic_irq from Thomas Gleixner is required
by the pinctrl driver, which is strangely not in linux-next, only in tip.git
- "mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA" moves the
SDMMC_CMD_USE_HOLD_REG constant into the common header, which is required
on these Rockchip SoCs
- the db_apb_timer enhancements sent separately
- the pinctrl-generic option for pin-default pulls, sent today
Heiko Stuebner (8):
clk: flag to use upper half of the register as change indicator
clk: divider: add flag to limit possible dividers to even numbers
mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_remove
mmc: dw_mmc-pltfm: add Rockchip variant
pinctrl: add pinctrl driver for Rockchip SoCs
clk: add basic Rockchip rk3066a clock support
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: add basic support for Rockchip RK3066a boards
.../bindings/pinctrl/rockchip,pinctrl.txt | 97 ++
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 34 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/rk3066a-clocks.dtsi | 460 +++++++
arch/arm/boot/dts/rk3066a.dtsi | 359 +++++
arch/arm/include/debug/rockchip.S | 42 +
arch/arm/mach-rockchip/Kconfig | 17 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rockchip.c | 54 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-divider.c | 29 +-
drivers/clk/clk-gate.c | 24 +-
drivers/clk/clk-mux.c | 15 +-
drivers/clk/rockchip/Makefile | 6 +
drivers/clk/rockchip/clk-rockchip-pll.c | 131 ++
drivers/clk/rockchip/clk-rockchip-pll.h | 19 +
drivers/clk/rockchip/clk-rockchip.c | 313 +++++
drivers/mmc/host/dw_mmc-pltfm.c | 48 +-
drivers/pinctrl/Kconfig | 6 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rockchip.c | 1364 ++++++++++++++++++++
include/dt-bindings/pinctrl/rockchip.h | 37 +
include/linux/clk-provider.h | 18 +
24 files changed, 3053 insertions(+), 26 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
create mode 100644 arch/arm/boot/dts/rk3066a-clocks.dtsi
create mode 100644 arch/arm/boot/dts/rk3066a.dtsi
create mode 100644 arch/arm/include/debug/rockchip.S
create mode 100644 arch/arm/mach-rockchip/Kconfig
create mode 100644 arch/arm/mach-rockchip/Makefile
create mode 100644 arch/arm/mach-rockchip/rockchip.c
create mode 100644 drivers/clk/rockchip/Makefile
create mode 100644 drivers/clk/rockchip/clk-rockchip-pll.c
create mode 100644 drivers/clk/rockchip/clk-rockchip-pll.h
create mode 100644 drivers/clk/rockchip/clk-rockchip.c
create mode 100644 drivers/pinctrl/pinctrl-rockchip.c
create mode 100644 include/dt-bindings/pinctrl/rockchip.h
--
1.7.2.3
next reply other threads:[~2013-06-06 19:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-06 19:07 Heiko Stübner [this message]
2013-06-06 19:08 ` [PATCH v2 1/8] clk: flag to use upper half of the register as change indicator Heiko Stübner
2013-06-07 11:46 ` Linus Walleij
2013-06-07 12:27 ` Heiko Stübner
2013-06-07 15:21 ` Haojian Zhuang
[not found] ` <201306062107.58875.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-06-06 19:09 ` [PATCH v2 2/8] clk: divider: add flag to limit possible dividers to even numbers Heiko Stübner
2013-06-06 19:10 ` [PATCH v2 3/8] mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_remove Heiko Stübner
2013-06-06 19:11 ` [PATCH v2 4/8] mmc: dw_mmc-pltfm: add Rockchip variant Heiko Stübner
2013-06-06 20:35 ` Andy Shevchenko
2013-06-06 19:11 ` [PATCH v2 5/8] pinctrl: add pinctrl driver for Rockchip SoCs Heiko Stübner
2013-06-07 12:53 ` Linus Walleij
[not found] ` <CACRpkdZ97poa5HOP4baDnsdq5OjwO5S2=+pPH9ey84r=ZW43nA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-06-07 23:13 ` Heiko Stübner
2013-06-07 23:53 ` Heiko Stübner
2013-06-06 19:12 ` [PATCH v2 6/8] clk: add basic Rockchip rk3066a clock support Heiko Stübner
2013-06-06 19:12 ` [PATCH v2 7/8] arm: add debug uarts for rockchip rk29xx and rk3xxx series Heiko Stübner
2013-06-06 19:13 ` [PATCH v2 8/8] arm: add basic support for Rockchip RK3066a boards Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201306062107.58875.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=arnd@arndb.de \
--cc=cjb@laptop.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@linaro.org \
--cc=jh80.chung@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=rob.herring@calxeda.com \
--cc=tgih.jun@samsung.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).